Partager via

NDISTest 6.5 - 2 Machine - PM_WakeOnLinkChange

  • Article

This test verifies that a device that advertises support for D3 on Disconnect (also known as Wake On Link Change) can assert #PME line on PCI bus and respond to requests from the operating system to go to a low power state.

Test details

Associated requirements

Device.Network.LAN.CS.WakeEvents Device.Network.LAN.PM.PowMgmtNDIS

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~25 minutes

Categories

Certification Functional

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting LAN Testing.

 

 

Send comments about this topic to Microsoft