Partager via

NDISTest 6.5 - 1 Machine - SRIOVBasicVerification

  • Article

This test does the basic verification of the SRI-OV functionality on the miniport adapter in the presence of vSwitch. This is a single machine job and it needs additional configuration for execution.

  • The machine used for testing should have the Hyper-V server role installed. Also, make sure that you select and install the Hyper-V Module PowerShell management tools during installation.

  • Make sure you that copy a Windows 8 VHD (that you want to use for creating the VM) to the local folder (for example: C:\VHDs) on the machine under test.

Now, you’re ready to run the SRIOVBasicVerification test.

When you select the job and click ‘Run Selected’, you will get a pop-up like the image shown below for entering additional parameters:

The values that the job expects are as follows:

  • VMName – You can give any name for the virtual machine. Please make sure that a virtual machine with the same name does not exist on the test machine already.

  • VHDName – Enter the name of the VHD that you copied to the test machine earlier. For example: Mastervhd.vhd. This vhd will not be deleted from the test machine.

  • VHDPath – Enter the path to the VHD location on the test machine (not on the controller). For example: C:\VHDs.

Test details

Associated requirements

Device.Network.LAN.SRIOV.SRIOV

See the device hardware requirements.

Platforms

Windows Server 2012 (x64) Windows 8.1 x64 Windows Server 2012 R2

Expected run time

~2 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting LAN Testing.

 

 

Send comments about this topic to Microsoft