WiFi Direct Scenario Tests - Basic
This test suite verifies basic Wi-Fi Direct (WFD) pairing and rapid enumeration of devices during the discovery process (PeerWatcher).
Test details
Associated requirements |
Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~6 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test suite does the following:
Pairing
The system under test (SUT) acts as a listener and waits in discoverable mode.
The device under test (DUT) discovers the SUT and pairs with it.
If the system has previously been a Group Owner (GO) to a persistent pairing, an invitation is used. Otherwise, GO negotiation is performed. The pairing success is confirmed in five seconds.
Peer Watcher Discovery
The SUT acts as a device in listen mode.
The DUT starts a thread to discover the devices.
The DUT repeatedly enumerates already discovered devices every 50 milliseconds for 6 seconds. It is expected that discovery and all enumerate devices operations succeed.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
PIN |
The WPS-PIN for WFD pairing. Default value: 12345670 |
Related topics