Partager via

NDISTest 6.5 - 2 Machine - VMQPowerManagement

  • Article

This test uses the PowerManager class to query the supported sleep states that the machine supports. The test then creates a queue on the VMQ-capable adapter, sets a filter on the queue, brings the machine to standby/ hibernation state, wakes up the machine (either automatic or manual), and then runs a send/receive test to check if the queue /filter setting is properly preserved during the sleep-wake up cycle.

Test details

Associated requirements

Device.Network.LAN.VMQ.VirtualMachineQueues

See the device hardware requirements.

Platforms

Windows 8 (x64) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows 8.1 x64 Windows Server 2012 R2

Expected run time

~5 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting LAN Testing.

 

 

Send comments about this topic to Microsoft