Partager via

WiFi Direct Proximity Tests - MultiMachine EndToEnd Host PreAP24

  • Article

This test verifies a basic end-to-end scenario by using the PeerFinder APIs over Wi-Fi Direct. A connection between three machines is established and a small amount of data is exchanged between the host and clients. The device under test (DUT_ connects to a 2.4 GHz access point (AP) before the test begins.

Test details

Associated requirements

Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients

See the device hardware requirements.

Platforms

Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~6 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test requires three computers and two DD-WRT-capable access points.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

Parameter Description

AP1IPAddress

IP Address of the first AP that connects to the system.

AP2IPAddress

IP Address of the second AP that connects to the system.

AP1Password

Root password for the first AP that connects to the system.

AP2Password

Root password for the second AP that connects to the system.

 

WiFi Direct Proximity Tests

 

 

Send comments about this topic to Microsoft