WLAN D2 Sleep - Reliability
This test validates the D2 sleep functionality. The device should enter the D2 state after pressing the power button in two minutes, and then return to D0 after 8 hours.
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~270 minutes |
Categories |
Certification Reliability |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
Devices that support InstantGo will automatically pass the test.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
TestDeviceSupports5ghz |
If the device supports 5 GHz network, this will be set to true. Default value: True |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. Default value: 192.168.2.2 |
AP1Password |
The root password for the first physical access point. Default value: password |
AP2IPAddress |
The IP address of the WAN port of the second physical access point. Default value: 192.168.2.3 |
AP2Password |
The root password for the second physical access point. Default value: password |