Partager via

WiFi Direct Scenario Tests - BasicPlus (a38222aa-6a67-4b3c-84d0-ac34e40ba6e0)

  • Article

This test suite verifies basic Wi-Fi Direct (WFD) pairing and ReInvoke Invitation. The test also verifies the operation of the stop discovery OID.

Test details

Associated requirements

Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients

See the device hardware requirements.

Platforms

Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~6 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test suite does the following:

  1. ReInvoke Invitation

    1. The system under test (SUT) acts as a listener and waits in discoverable mode.

    2. The device under test (DUT) discovers the SUT and pairs with it by using the Device Association Framework (DAF).

    3. The DUT waits for the connection to be automatically destroyed in a few seconds.

    4. The DUT reconnects to the SUT.

    5. The DUT disconnects from the SUT.

    6. The paired SUT is removed (DAF Remove Association).

  2. The SUT acts as a device in listen mode.

    1. The DUT discovers the SUT and confirms that it is visible and that the discovered SUT has the correct PrimaryDeviceType attribute in the device descriptor.

    2. The DUT starts a discover request and cancels it after one second.

    3. The DUT starts a discover request and cancels it after two seconds.

    4. The DUT starts a discover request and cancels it after three seconds.

    5. The DUT starts a discover request and cancels it after ten seconds.

    In all four test variations, it is confirmed that the cancel discovery request and the original discovery request were both successful.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

Parameter Description

PIN

The WPS-PIN for WFD pairing.

Default value: 12345670

 

WiFi Direct Scenario Tests

 

 

Send comments about this topic to Microsoft