Partager via


GetDeviceCaps (Windows CE 5.0)

Send Feedback

This function retrieves information about the capabilities of a specified device.

intGetDeviceCaps(HDChdc, intnIndex);

Parameters

  • hdc
    [in] Handle to the device context.

  • nIndex
    [in] Specifies the item to return.

    This parameter can be one of the following values.

    Value Description
    ASPECTX Relative width of a device pixel used for line drawing.
    ASPECTXY Diagonal width of the device pixel used for line drawing.
    ASPECTY Relative height of a device pixel used for line drawing.
    BITSPIXEL Number of adjacent color bits for each pixel.
    CLIPCAPS Flag that indicates the clipping capabilities of the device.

    If the device can clip to a rectangle, it is 1. Otherwise, it is 0.

    COLORRES Actual color resolution of the device, in bits per pixel.

    This index is valid only if the device driver sets the RC_PALETTE bit in the RASTERCAPS index and is available only if the driver is compatible with 16-bit Windows.

    CURVECAPS Value that indicates the curve capabilities of the device, as shown in the following list:
      CC_CHORD Device can draw chord arcs.
      CC_CIRCLES Device can draw circles.
      CC_ELLIPSES Device can draw ellipses.
      CC_INTERIORS Device can draw interiors.
      CC_NONE Device does not support curves.
      CC_PIE Device can draw pie wedges.
      CC_ROUNDRECT Device can draw rounded rectangles.
      CC_STYLED Device can draw styled borders.
      CC_WIDE Device can draw wide borders.
      CC_WIDESTYLED Device can draw borders that are wide and styled.
    DRIVERVERSION The device driver version.
    HORZRES Width, in pixels, of the screen.
    HORZSIZE Width, in millimeters, of the physical screen.
    LINECAPS Value that indicates the line capabilities of the device, as shown in the following list:
      LC_INTERIORS Device can draw interiors.
      LC_MARKER Device can draw a marker.
      LC_NONE Device does not support lines.
      LC_POLYLINE Device can draw a polyline.
      LC_POLYMARKER Device can draw multiple markers.
      LC_STYLED Device can draw styled lines.
      LC_WIDE Device can draw wide lines.
      LC_WIDESTYLED Device can draw lines that are wide and styled.
    LOGPIXELSX Number of pixels per logical inch along the screen width.

    In a system with multiple display monitors, this value is the same for all monitors.

    LOGPIXELSY Number of pixels per logical inch along the screen height.

    In a system with multiple display monitors, this value is the same for all monitors.

    NUMBRUSHES Number of device-specific brushes.
    NUMCOLORS Number of entries in the device's color table, if the device has a color depth of no more than 8 bits per pixel.

    For devices with greater color depths, –1 is returned.

    NUMFONTS Number of device-specific fonts.
    NUMPENS Number of device-specific pens.
    NUMRESERVED Number of reserved entries in the system palette.

    This index is valid only if the device driver sets the RC_PALETTE bit in the RASTERCAPS index and is available only if the driver is compatible with 16-bit Windows.

    PDEVICESIZE Reserved.
    PHYSICALHEIGHT For printing devices: the height of the physical page, in device units.

    For example, a printer set to print at 600 dpi on 8.5"x11" paper has a physical height value of 6600 device units.

    The physical page is almost always greater than the printable area of the page, and never smaller.

    Windows CE 1.0 and 1.01 do not support this value.

    PHYSICALOFFSETX For printing devices: the distance from the left edge of the physical page to the left edge of the printable area, in device units.

    For example, a printer set to print at 600 dpi on 8.5"x11" paper, that cannot print on the leftmost 0.25" of paper, has a horizontal physical offset of 150 device units.

    Windows CE 1.0 and 1.01 do not support this value.

    PHYSICALOFFSETY For printing devices: the distance from the top edge of the physical page to the top edge of the printable area, in device units.

    For example, a printer set to print at 600 dpi on 8.5"x11" paper, that cannot print on the topmost 0.5" of paper, has a vertical physical offset of 300 device units.

    Windows CE 1.0 and 1.01 do not support this value.

    PHYSICALWIDTH For printing devices: the width of the physical page, in device units.

    For example, a printer set to print at 600 dpi on 8.5"x11" paper has a physical width value of 5100 device units.

    The physical page is almost always greater than the printable area of the page, and never smaller.

    Windows CE 1.0 and 1.01 do not support this value.

    PLANES Number of color planes.
    POLYGONALCAPS Value that indicates the polygon capabilities of the device, as shown in the following list:
      PC_INTERIORS Device can draw interiors.
      PC_NONE Device does not support polygons.
      PC_POLYGON Device can draw alternate-fill polygons.
      PC_RECTANGLE Device can draw rectangles.
      PC_SCANLINE Device can draw a single scanline.
      PC_STYLED Device can draw styled borders.
      PC_WIDE Device can draw wide borders.
      PC_WIDESTYLED Device can draw borders that are wide and styled.
      PC_WINDPOLYGON Device can draw winding-fill polygons.
    RASTERCAPS Value that indicates the raster capabilities of the device, as shown in the following list:
      RC_BANDING Requires banding support.
      RC_BITBLT Capable of transferring bitmaps.
      RC_BITMAP64 Capable of supporting bitmaps larger than 64K.
      RC_DI_BITMAP Capable of supporting device independent bitmaps.
      RC_DIBTODEV Unsupported.
      RC_GDI20_OUTPUT Capable of supporting features of 16-bit Windows 2.0.
      RC_PALETTE Specifies a palette-based device.
      RC_SCALING Capable of scaling.
      RC_STRETCHBLT Unsupported.
      RC_STRETCHDIB Unsupported.
    SHADEBLENDCAPS Value that indicates the shading and blending capabilities of the device. See Remarks for further comments.
      SB_CONST_ALPHA Handles the SourceConstantAlpha member of the BLENDFUNCTION structure, which is referenced by the blendFunction parameter of the AlphaBlend function.
      SB_GRAD_RECT Capable of handling GradientFill rectangles.
      SB_GRAD_TRI Capable of handling GradientFill triangles.
      0 Device does not support any of these capabilities.
      SB_PIXEL_ALPHA Capable of handling per-pixel alpha in AlphaBlend.
      SB_PREMULT_ALPHA Capable of handling premultiplied alpha in AlphaBlend.
    SIZEPALETTE Number of entries in the system palette.

    This index is valid only if the device driver sets the RC_PALETTE bit in the RASTERCAPS index and is available only if the driver is compatible with 16-bit Windows.

    TECHNOLOGY Device technology. It can be any one of the following values.
      DT_PLOTTER Vector plotter
      DT_RASDISPLAY Raster display
      DT_RASPRINTER Raster printer
      DT_RASCAMERA Raster camera
      DT_CHARSTREAM Character stream
      DT_DISPFILE Display file
    TEXTCAPS Value that indicates the text capabilities of the device, as shown in the following list:
      TC_CP_STROKE Device is capable of stroke clip precision.
      TC_CR_90 Device is capable of 90-degree character rotation.
      TC_CR_ANY Device is capable of any character rotation.
      TC_EA_DOUBLE Device can draw double-weight characters.
      TC_IA_ABLE Device can italicize.
      TC_OP_CHARACTER Device is capable of character output precision.
      TC_OP_STROKE Device is capable of stroke output precision.
      TC_RA_ABLE Device can draw raster fonts.
      TC_RESERVED Reserved; must be zero.
      TC_SA_CONTIN Device uses any multiples for exact character scaling.
      TC_SA_DOUBLE Device is capable of doubled character for scaling.
      TC_SA_INTEGER Device uses integer multiples only for character scaling.
      TC_SCROLLBLT Device cannot scroll using a bit-block transfer.

    This meaning may be the opposite of what you expect.

      TC_SF_X_YINDEP Device can scale independently in the x- and y-directions.
      TC_SO_ABLE Device can draw strikeouts.
      TC_UA_ABLE Device can underline.
      TC_VA_ABLE Device can draw vector fonts.
    VERTRES Height, in raster lines, of the screen.
    VERTSIZE Height, in millimeters, of the physical screen.

    Return Values

    Returns the value of the desired item.

    Remarks

    The following table shows the six indexes that GetDeviceCaps provides in place of printer escapes.

    Index Printer escape replaced
    PHYSICALWIDTH GETPHYSPAGESIZE
    PHYSICALHEIGHT GETPHYSPAGESIZE
    PHYSICALOFFSETX GETPRINTINGOFFSET
    PHYSICALOFFSETY GETPHYSICALOFFSET

    Windows CE 1.0 and 1.01 do not support these indexes.

    Requirements

    OS Versions: Windows CE 1.0 and later.
    Header: Windows.h.
    Link Library: Coredll.lib.

    See Also

    GetObjectType | StretchBlt | GDI Functions

    Send Feedback on this topic to the authors

    Feedback FAQs

    © 2006 Microsoft Corporation. All rights reserved.