AMD DBAu1000 Development Board Supported Features (Windows CE 5.0)
The following table shows the hardware components that are supported in the board support package (BSP) for the AMD DBAu1000 Development Board for Au1000 processors.
| Hardware component | DBAu1000 hardware support | DBAu1000 BSP support |
|---|---|---|
| RAM | 64 MB | Yes |
| Flash memory | 32 MB | Yes |
| Boot ROM | Yes | Yes |
| Timers | Yes | Yes |
| Real-time clock | No | Not applicable |
| VGA video adapter | No | Not applicable |
| LCD display | No | Not applicable |
| Ethernet port | Yes | Yes |
| Serial port | 2 | Yes
|
| PC card or compact flash card | Yes | Yes |
| Mouse | Universal serial bus (USB) only | Yes |
| Keyboard | USB only | Yes |
| Hardware reset through a cold boot | Yes | Yes |
| Hardware reset through a warm boot | Yes | Yes |
| Software reset through a warm boot | Yes | Yes |
| Touch controller | No | Not applicable |
| USB host | Yes | Yes |
| USB function | Yes | No |
| Serial Infrared (SIR) | Yes | No |
| Fast Infrared (FIR) | Yes | No |
| Audio output | Yes | Yes |
| Audio input | Yes | Yes |
| Parallel for printing | No | Not applicable |
| Integrated Device Electronics (IDE) | No | Not applicable |
| Smart card | No | Not applicable |
| IEEE 1394 | No | Not applicable |
| Floppy disk drive | No | Not applicable |
| TV output | No | Not applicable |
| Floating point unit | No | Not applicable |
| Expansion connector | Yes | No |
| PCI slots | No | Not applicable |
| Compact PCI or PCI extender | No | Not applicable |
| Logic analyzer probes | Yes | No |
| IEEE 1149.1-compliant hardware (JTAG) | Yes | Yes |
| Debug LEDs | Yes | Yes |
| Companion or add-on cards | No | Not applicable |
| Form factor | Custom | Not applicable |
BSP Limitations Related to AMD DBAu1000 Development Board Hardware Issues
The following BSP limitations are related to hardware issues on the AMD DBAu1000 Development Board:
- There is no support for USB function.
- The boot loader and KITL only support Au1 on-chip Ethernet controllers.
- Audio input uses the J17 connector or plug.
- Audio output uses the J20 connector or plug.
BSP Limitations Related to AMD DBAu1000 Silicon Issues
The following BSP limitations are related to silicon issues on the AMD DBAu1000 Development Board:
The OAL sets the OD bit in the Config0 coprocessor register to fix or work around silicon-related problems.
If the BSP_YAMON flag is set, the boot loader and the BSP are compiled and built in a way that allows you to flash the boot loader to address 0xBFD00000. In this mode, use the YAMON autorun to jump to the boot loader.
The USB host driver reads enable the register to work around the silicon problem twice.
A USB host controller silicon problem might cause USB devices not to work or to work incorrectly. As a result, the memory can be corrupted and the USB device can randomly crash.
This problem is typical for USB mouse devices that have a 4-byte interrupt endpoint size. It does not affect the Microsoft® IntelliMouse®.
The static mapping uses two translation look-aside buffer (TLB) entries to work around silicon problems with the page frame when the size is greater than 4 KB.
Due to a silicon problem, the PCMCIA slot does not support 8-bit I/O operations on odd addresses. As a result, some PCMCIA cards, such as modem cards or Bluetooth cards, might not work or might work incorrectly.
For more information, see the AMD Web site.
See Also
How to Use the BSP for the AMD DBAu1000 Development Board | Setting up the AMD DBAu1000 Development Board Hardware
Send Feedback on this topic to the authors