Prerequisites for the RAS Authentication Test (Windows Embedded CE 6.0)
1/6/2010
The following tables show the hardware requirements for the RAS Authentication Test.
| Requirements | Description |
|---|---|
Windows Embedded CE device |
The device being tested |
RAS server with serial cable |
Should accept incoming clients without authentication. Must be connected to the Windows Embedded CE device via a serial cable. |
VPN server with Ethernet or other network connection |
Must be reachable over the network for VPN test cases (PPTP and L2TP). The VPN server must accept all authentication protocols and must have dial-in permission for the username given in the command line. |
Note
If you do not have the serial cable setup, you can skip the relevant test cases by specifying only the desired test cases using the -x option in Tux.
The following tables show the software requirements for the RAS Authentication Test.
| Requirements | Description |
|---|---|
Tux.exe |
Test harness, required for all tests |
Kato.dll |
Logging engine, required for all tests |
PPPAuth.dll |
Library containing the test cases |
The RAS Authentication Test requires SYSGEN_PPP for DCC cases, SYSGEN_PPTP for PPTP cases, and SYSGEN_L2TP for L2TP cases. If you do not have one or more of these SYSGENs, you can exclude the relevant test cases by specifying only the desired test cases w the -x** option in Tux.**