Example Test Configurations for the Wi-Fi Configuration Tests (Windows Embedded CE 6.0)

1/6/2010

The following examples illustrate ways to run the Wi-Fi Authentication Tests with different components and configurations.

Single Server and Access Point

Separate Servers and Multiple Access Points

Single Server and Access Point

This environment has only one server and one controllable access point (AP). The following illustration shows this architecture:

• A fixed access point
• A controllable access point
• A single computer with an IP address of 10.10.0.1, which acts as the AP Control server, the RADIUS server, and the DHCP server
• A test network
• A mobile device

The fixed access point has the following configuration:

• SSID: WIFI_OPEN
• Authentication: Open
• Encryption: WEP
• WEP-Key Index: 1
• WEP key: 0123456789

The following registry key and registry values control the behavior of the controllable access point:, HKEY_CURRENT_USER\Software\Microsoft\CETest\APCTL\AP1

Value	Type	Description
SSID	REG_SZ	WIFI_OPEN1
Configurator	REG_SZ	dlink; 10.10.0.48
Attenuator	REG_SZ	Manual; 0,0,100

At a command prompt on the server, run the following command:

apcontrol.exe -v -z -k Software\Microsoft\CETest\APCTL

At a command prompt on the device, run the following command:

\Windows\tux.exe -f\temp\amdebug.log -d authmatrix.dll

-c "-lHost 10.10.0.1"

Separate Servers and Multiple Access Points

This environment has servers that run on separate computers, and three controllable APs. The following illustration shows this architecture:

• A fixed access point
• Three controllable access points
• An AP Control server at IP address 10.10.0.2
• A combined RADIUS and DHCP server at IP address 10.10.0.1
• A test network
• A mobile device

In this example, the fixed access point is configured as follows:

• SSID: WIFI_OPEN
• Authentication: WPA-PSK
• Encryption: TKIP
• WEP key: 0123456789

The following registry keys and registry values control the behavior of the three controllable APs:

HKEY_CURRENT_USER\Software\Microsoft\CETest\APCTL\AP1

Value	Type	Description
SSID	REG_SZ	WIFI_OPEN1
Configurator	REG_SZ	dlink; 10.10.0.46
Attenuator	REG_SZ	Manual; 0,0,100

HKEY_CURRENT_USER\Software\Microsoft\CETest\APCTL\AP2

Value	Type	Description
SSID	REG_SZ	WIFI_OPEN2
Configurator	REG_SZ	buffalo; 10.10.0.47:admin:admin
Attenuator	REG_SZ	Manual; 0,0,100

HKEY_CURRENT_USER\Software\Microsoft\CETest\APCTL\AP3

Value	Type	Description
SSID	REG_SZ	WIFI_OPEN3
Configurator	REG_SZ	dlink; 10.10.0.48:dlinkroot:dlinkpasswd
Attenuator	REG_SZ	Manual; 0,0,100

At a command prompt on the server, run the following command:

apcontrol.exe -v -z -k Software\Microsoft\CETest\APCTL

At a command prompt on the device, run the following command:

\Windows\tux.exe -f\temp\amdebug.log -d authmatrix.dll

-c "-lHost 10.10.0.2"

See Also

Tasks

Running the Wi-Fi Authentication Tests

Other Resources

Wi-Fi Authentication Tests