LINEADDRFEATURE (Compact 2013)

3/26/2014

These constants list the operations that can be invoked on an address.

The following table shows the LINEADDRFEATURE constants.

Value	Description
LINEADDRFEATURE_FORWARD = 0x00000001	The address can be forwarded.
LINEADDRFEATURE_MAKECALL = 0x00000002	An outgoing call can be placed on the address.
LINEADDRFEATURE_PICKUP = 0x00000004	A call can be picked up at the address.
LINEADDRFEATURE_PICKUPDIRECT = 0x00000400	The linePickup function can be used to pick up a call on a specific address. TAPI versions 2.0 .
LINEADDRFEATURE_PICKUPGROUP = 0x00000200	The linePickup function can be used to pick up a call in the group. TAPI versions 2.0 .
LINEADDRFEATURE_PICKUPHELD = 0x00000100	The linePickup function, with a null destination address, can be used to pick up a call that is held on the address. This is normally used only in a bridged-exclusive arrangement. TAPI versions 2.0 .
LINEADDRFEATURE_PICKUPWAITING = 0x00000800	The linePickup function, with a null destination address, can be used to pick up a call waiting call. Note that this does not necessarily indicate that a waiting call is actually present, because it is often impossible for a telephony device to automatically detect such a call. It does, however, indicate that the hook-flash function will be invoked to attempt to switch to such a call. TAPI versions 2.0 .
LINEADDRFEATURE_SETMEDIACONTROL = 0x00000008	Media control can be set on this address.
LINEADDRFEATURE_SETTERMINAL = 0x00000010	The terminal modes for this address can be set.
LINEADDRFEATURE_SETUPCONF = 0x00000020	A conference call with a NULL initial call can be set up at this address.
LINEADDRFEATURE_UNCOMPLETECALL = 0x00000040	Call completion requests can be canceled at this address.
LINEADDRFEATURE_UNPARK = 0x00000080	Calls can be unparked using this address. Note: If none of the new modified "PICKUP" bits is set in the dwAddressFeatures member in the LINEADDRESSSTATUS structure but the LINEADDRFEATURE_PICKUP bit is set, then any of the pickup modes may work. The service provider has simply not specified which ones.
LINEADDRFEATURE_FORWARDDND = 0x00001000	The lineForward function (with an empty destination address) can be used to turn on the Do Not Disturb feature on the address. LINEADDRFEATURE_FORWARD will also be set. TAPI versions 2.0 .
LINEADDRFEATURE_FORWARDFWD = 0x00002000	The lineForward function can be used to forward calls on the address to other numbers. LINEADDRFEATURE_FORWARD will also be set. Note: If neither of the new modified "FORWARD" bits is set in the dwAddressFeatures member in LINEADDRESSSTATUS but the LINEADDRFEATURE_FORWARD bit is set, then any of the forward modes may work; the service provider has simply not specified which ones. TAPI versions 2.0 .

Remarks

These constants cannot be extended. All 32 bits are reserved.

These constants are used both in the LINEADDRESSCAPS (returned by lineGetAddressCaps) and in the LINEADDRESSSTATUS (returned by lineGetAddressStatus) structures. LINEADDRESSCAPS reports the availability of the address features by the service provider (mainly the switch) for a given address. An application would make this determination when it initializes. The LINEADDRESSSTATUS structure reports, for a given address, which address features can actually be invoked while the address is in the current state. An application would make this determination dynamically after address-state changes, typically caused by call-related activities on the address.

Requirements

Header

tapi.h

See Also

Reference

TAPI Constants
linePickup
lineForward
lineGetAddressCaps
lineGetAddressStatus
LINEADDRESSSTATUS
LINEADDRESSCAPS