Partager via

lineGenerateTone (function) (Compact 2013)

  • Article

3/26/2014

This function generates the specified inband tone over the specified call. Invoking this function with a zero for dwToneMode aborts the tone generation currently in progress on the specified call. Invoking lineGenerateTone or lineGenerateDigits while tone generation is in progress aborts the current tone generation or digit generation and initiates the generation of the newly specified tone or digits.

Syntax

LONG WINAPI lineGenerateTone(
  HCALL hCall,
  DWORD dwToneMode,
  DWORD dwDuration,
  DWORD dwNumTones,
  LPLINEGENERATETONE const lpTones 
);

Parameters

  • hCall
    Handle to the call on which a tone is to be generated. The application must be an owner of the call. The call state of hCall can be any state.
  • dwToneMode
    Tone to be generated. Tones can be either standard or custom. A custom tone is composed of a set of arbitrary frequencies. A small number of standard tones are predefined. The duration of the tone is specified with the dwDuration parameter for both standard and custom tones. The dwToneMode parameter can only have one bit set. If no bits are set (the value zero is passed), tone generation is canceled. This parameter uses one of the LINETONEMODE constants.

  • dwDuration
    Duration, in milliseconds, during which the tone should be sustained. A value of zero for dwDuration uses a default duration for the specified tone. The following table shows the default values.

    Value

    Description

    CUSTOM

    The tone is sustained until it is shut off, usually by user interaction or an equipment time-out.

    RINGBACK

    The tone is sustained until it is shut off, usually by user interaction or an equipment time-out.

    BUSY

    The tone is sustained until it is shut off, usually by user interaction or an equipment time-out.

    BEEP

    The tone is sustained until it is shut off, usually by user interaction or an equipment time-out.

    BILLING

    Fixed (single cycle).
  • dwNumTones
    The number of entries in the lpTones array. This parameter is ignored if dwToneMode is not equal to CUSTOM.
  • lpTones
    A pointer to a LINEGENERATETONE (structure) array that specifies the tone's components. This parameter is ignored for standard LINETONEMODE constants tones such as LINETONEMODE_BUSY. If lpTones is a multifrequency tone, the various tones are played simultaneously.

Return Value

Returns zero if the request succeeds or a negative error number if an error occurs. The following table shows the return values for this function.

Value

Description

LINEERR_INVALCALLHANDLE

The handle to the call is invalid.

LINEERR_NOTOWNER

The application is not the owner of this call.

LINEERR_INVALCALLSTATE

The call state is invalid.

LINEERR_OPERATIONUNAVAIL

The operation is unavailable.

LINEERR_INVALPOINTER

The pointer is invalid or the value specified by the dwNumTones parameter is too large.

LINEERR_OPERATIONFAILED

The operation failed.

LINEERR_INVALTONEMODE

The tone mode is invalid.

LINEERR_RESOURCEUNAVAIL

The resources are unavailable.

LINEERR_INVALTONE

The tone is invalid.

LINEERR_UNINITIALIZED

A parameter is uninitialized.

LINEERR_NOMEM

Not enough memory is available.

Remarks

The lineGenerateTone function is considered to have completed successfully when the tone generation has been successfully initiated, not when the generation of the tone is finished. The function allows the inband generation of several predefined tones, such as ringback, busy tones, and beep. It also allows for the fabrication of custom tones by specifying their component frequencies, cadence, and volume. Because these tones are generated as inband tones, the call would typically have to be in the connected state for tone generation to be effective. When the generation of the tone is complete, or when tone generation is canceled, a LINE_GENERATE message is sent to the application.

Only one inband generation request (tone generation or digit generation) is allowed to be in progress per call across all applications that are owners of the call. This implies that if tone generation is currently in progress on a call, invoking lineGenerateDigits cancels the tone generation.

If the LINEERR_INVALPOINTER error value is returned, the specified lpTones parameter is invalid or the value specified by the dwNumTones parameter is too large.

Requirements

Header

tapi.h

Library

TAPI32.dll

See Also

Reference

TAPI Line Device Functions
lineGenerateDigits