NdisReset (Compact 2013)

3/26/2014

This function forwards a reset request to an underlying driver.

Syntax

VOID NdisReset(
  PNDIS_STATUS Status,
  NDIS_HANDLE NdisBindingHandle
);

Status
[out] Pointer to a caller-supplied variable that is set on return from this function. The underlying driver determines which NDIS_STATUS_XXX is returned.

NdisBindingHandle
[in] Handle returned by the NdisOpenAdapter function that identifies the target NIC or the virtual adapter of the next-lower driver to which the caller is bound.

The following table shows typical return values for this function.

Value	Description
NDIS_STATUS_SUCCESS	The underlying driver reset its NIC or virtual NIC to its initial state.
NDIS_STATUS_PENDING	The request is being handled asynchronously, and the caller's ProtocolResetComplete function will be called when it is completed.
NDIS_STATUS_RESET_IN_PROGRESS	The underlying driver is currently resetting its NIC, so this request is superfluous. Moreover, the caller's ProtocolStatus function was or will be called with NDIS_STATUS_RESET_START to indicate that a reset is in progress.
NDIS_STATUS_NOT_RESETTABLE	The underlying NIC cannot be reset by software commands.
NDIS_STATUS_ADAPTER_REMOVED or NDIS_STATUS_FAILURE	The caller's binding is already closed, so no reset will be attempted for this caller.
NDIS_STATUS_CLOSING	The caller's binding is currently being closed, so no reset will be attempted for this caller.
NDIS_STATUS_SOFT_ERRORS	The underlying NIC driver reset the netcard, but one or more recoverable hardware errors occurred during this operation. The NIC driver has logged the errors.
NDIS_STATUS_HARD_ERRORS	The underlying NIC driver attempted to reset the netcard, but one or more unrecoverable hardware errors occurred during this operation. The NIC driver has logged the errors.
NDIS_STATUS_NOT_ACCEPTED	This value usually is a nonspecific default, returned when none of the more specific NDIS_STATUS_XXX caused NDIS or the underlying NIC driver to fail the request.

None.

Header

ndis.h