Partager via

<< Operator (Visual Basic) 

  • Article

Performs an arithmetic left shift on a bit pattern.

result = pattern << amount

Parts

  • result
    Required. Integral numeric value. The result of shifting the bit pattern. The data type is the same as that of pattern.
  • pattern
    Required. Integral numeric expression. The bit pattern to be shifted. The data type must be an integral type (SByte, Byte, Short, UShort, Integer, UInteger, Long, or ULong).
  • amount
    Required. Numeric expression. The number of bits to shift the bit pattern. The data type must be Integer or widen to Integer.

Remarks

Arithmetic shifts are not circular, which means the bits shifted off one end of the result are not reintroduced at the other end. In an arithmetic left shift, the bits shifted beyond the range of the result data type are discarded, and the bit positions vacated on the right are set to zero.

To prevent shifting by more bits than the result can hold, Visual Basic masks the value of amount with a size mask corresponding to the data type of pattern. The binary AND of these values is used for the shift amount. The size masks are as follows:

Data type of pattern Size mask (decimal) Size mask (hexadecimal)

SByte, Byte

7

&H00000007

Short, UShort

15

&H0000000F

Integer, UInteger

31

&H0000001F

Long, ULong

63

&H0000003F

If amount is zero, the value of result is identical to the value of pattern. If amount is negative, it is taken as an unsigned value and masked with the appropriate size mask.

Arithmetic shifts never generate overflow exceptions.

Note

The << operator can be overloaded, which means that a class or structure can redefine its behavior when an operand has the type of that class or structure. If your code uses this operator on such a class or structure, be sure you understand its redefined behavior. For more information, see Operator Procedures.

Example

The following example uses the << operator to perform arithmetic left shifts on integral values. The result always has the same data type as that of the expression being shifted.

Dim pattern As Short = 192
' The bit pattern is 0000 0000 1100 0000.
Dim result1, result2, result3, result4, result5 As Short
result1 = pattern << 0
result2 = pattern << 4
result3 = pattern << 9
result4 = pattern << 17
result5 = pattern << -1

The results of the preceding example are as follows:

  • result1 is 192 (0000 0000 1100 0000).

  • result2 is 3072 (0000 1100 0000 0000).

  • result3 is -32768 (1000 0000 0000 0000).

  • result4 is 384 (0000 0001 1000 0000).

  • result5 is 0 (shifted 15 places to the left).

The shift amount for result4 is calculated as 17 AND 15, which equals 1.

See Also

Reference

Bit Shift Operators
Assignment Operators
<<= Operator (Visual Basic)
Operator Precedence in Visual Basic
Operators Listed by Functionality

Concepts

Arithmetic Operators in Visual Basic