New-NetworkControllerLoadBalancer

Reference

Module:: NetworkController

This cmdlet adds/updates a load balancer resource.

Syntax

New-NetworkControllerLoadBalancer
   [-ResourceId] <String>
   [[-Tags] <PSObject>]
   [-Properties] <LoadBalancerProperties>
   [[-Etag] <String>]
   [[-ResourceMetadata] <ResourceMetadata>]
   [-Force]
   -ConnectionUri <Uri>
   [-CertificateThumbprint <String>]
   [-Credential <PSCredential>]
   [-PassInnerException]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The load balancer resource allows fine-grained configuration of how incoming traffic is distributed across VM instances in a virtual network.

It contains the following:

Front End IP configuration - This describes the exposed IP address of the load balancer. For example, this address can be a reserved public or private IP address previously obtained by the customer, or an IP address dynamically allocated from a subnet of a virtual network.

BackEnd address pools - This describes the backend VMs behind the front end IP resource.

Load balancing rules - This defines how traffic that arrives at the front-end IP is to be sent to the backend IP

Health probe - Health probes are used by the load balancer to determine the health state of the backend pool members.

Inbound NAT rules - This can be used to forward external traffic to a specific VM in the virtual network

Outbound NAT rules - This can be used to forward VM network traffic from the virtual network to external destinations using network address translation (NAT).

Examples

Example 1

This example creates a public VIP for load balancing a pool of two VMs on a virtual network. This also adds a HTTP health probe to detect whether one of the pool members becomes non-responsive.

//Prepare the load balancer object
$lbresourceId = "LB2"

$lbproperties = @{}
$lbproperties.frontendipconfigurations = @()
$lbproperties.backendAddressPools = @()
$lbproperties.probes = @()
$lbproperties.loadbalancingRules = @()
$lbproperties.OutboundNatRules = @()

//Assign front end IP
$vipip = "10.127.132.5"
$vipln = get-networkcontrollerlogicalnetwork -ConnectionUri $uri -resourceid "f8f67956-3906-4303-94c5-09cf91e7e311"

$fe = @{}
$fe.resourceId = "FE1"
$fe.resourceRef = "/loadBalancers/$lbresourceId/frontendIPConfigurations/$($fe.resourceId)"
$fe.properties = @{}
$fe.properties.subnet = @{}
$fe.properties.subnet.ResourceRef = $vipln.properties.Subnets[0].ResourceRef
$fe.properties.privateIPAddress = $vipip
$fe.properties.privateIPAllocationMethod = "Static"
$lbproperties.frontendipconfigurations += $fe

//Allocate backend address pool
$backend = @{}
$backend.resourceId = "BE1"
$backend.resourceRef = "/loadBalancers/$lbresourceId/backendAddressPools/$($b)"
$lbproperties.backendAddressPools += $backend

//Define health probe
$lbprobe = @{}
$lbprobe.ResourceId = "Probe1"
$lbprobe.resourceRef = "/loadBalancers/$lbresourceId/Probes/$($lbprobe.resourceId)"
$lbprobe.properties = @{}
$lbprobe.properties.protocol = "HTTP"
$lbprobe.properties.port = "80"
$lbprobe.properties.RequestPath = "/health.htm"
$lbprobe.properties.IntervalInSeconds = 5
$lbprobe.properties.NumberOfProbes = 11
$lbproperties.probes += $lbprobe

//Define load balancing rule
$lbrule = @{}
$lbrule.ResourceId = "webserver1"
$lbrule.properties = @{}
$lbrule.properties.FrontEndIPConfigurations = @()
$lbrule.properties.FrontEndIPConfigurations += $fe
$lbrule.properties.backendaddresspool = $backend
$lbrule.properties.protocol = "TCP"
$lbrule.properties.frontendPort = 80
$lbrule.properties.Probe = $lbprobe
$lbproperties.loadbalancingRules += $lbrule

//Add the load balancer to Network Controller
New-NetworkControllerLoadBalancer -ConnectionUri https://networkcontroller -ResourceId $lbresourceId -Properties $lbproperties

Parameters

-CertificateThumbPrint

Specifies the digital public key X.509 certificate of a user account that has permission to perform this action. This is the certificate thumbprint of the certificate. This thumbprint must also be provided in the ClientCertificateThumbprint parameter in the Install-NetworkController or Set-NetworkController cmdlet so that Network Controller can authorize this user.

Type:	string
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ConnectionUri

Specifies the Uniform Resource Identifier (URI) of the Network Controller, used by all Representational State Transfer (REST) clients to connect to Network Controller.

Type:	Uri
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-Credential

Specifies a user credential that has permission to perform this action. The default value is the current user.This user must be present in the security group provided in the ClientSecurityGroup parameter in the Install-NetworkController cmdlet.

Type:	PSCredential
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Etag

Specifies the entity tag (ETag) parameter of the resource. An ETag (entity tag) is an HTTP response header returned by an HTTP-compliant web server used to determine change in the content of a resource at a given URL. The value of the header is an opaque string representing the state of the resource at the time the response was generated.

Type:	string
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Force

Forces the command to run without asking for user confirmation.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PassInnerException

This thumbprint must also be provided in the ClientCertificateThumbprint parameter in the Install-NetworkController or Set-NetworkController cmdlet so that Network Controller can authorize this user.

The thumbprint must be provided only if the network controller client authentication is X509 certificates. Get-NetworkController retrieves that client authentication and authorization information.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Properties

Following properties can be added/modified for a load balancer resource:

Front end IP configuration
Back end address pool
Health probe
Load balancing rule
Outbound NAT rules
Inbound NAT rules

Type:	LoadBalancerProperties
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-ResourceId

Specifies the unique identifier of the load balancer resource

Type:	string
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-ResourceMetadata

This parameter contains metadata information for the client, such as the tenant ID, group ID, and resource name.

Type:	ResourceMetadata
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Tags

@{Text=}

Type:	psobject
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Inputs

String

Microsoft.Windows.NetworkController.LoadBalancerProperties