Set-IpamAddress
Modifies an IP address in IPAM.
Syntax
Set-IpamAddress
[-IpAddress] <IPAddress[]>
[[-ManagedByService] <String[]>]
[[-ServiceInstance] <String[]>]
[-NetworkType <VirtualizationType[]>]
[-AddressSpace <String[]>]
[-NewIPAddress <IPAddress>]
[-NewManagedByService <String>]
[-NewServiceInstance <String>]
[-NewNetworkType <VirtualizationType>]
[-NewAddressSpace <String>]
[-DeviceType <String>]
[-IpAddressState <String>]
[-AssignmentType <AddressAssignment>]
[-AssignmentDate <DateTime>]
[-MacAddress <String>]
[-ExpiryDate <DateTime>]
[-Description <String>]
[-Owner <String>]
[-AssetTag <String>]
[-SerialNumber <String>]
[-ClientId <String>]
[-Duid <String>]
[-Iaid <UInt32>]
[-ReservationServer <String>]
[-ReservationName <String>]
[-ReservationType <DhcpReservationType>]
[-ReservationDescription <String>]
[-DeviceName <String>]
[-ForwardLookupZone <String>]
[-ForwardLookupPrimaryServer <String>]
[-ReverseLookupZone <String>]
[-ReverseLookupPrimaryServer <String>]
[-AddCustomConfiguration <String>]
[-RemoveCustomConfiguration <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-IpamAddress
-InputObject <CimInstance[]>
[-NewIPAddress <IPAddress>]
[-NewManagedByService <String>]
[-NewServiceInstance <String>]
[-NewNetworkType <VirtualizationType>]
[-NewAddressSpace <String>]
[-DeviceType <String>]
[-IpAddressState <String>]
[-AssignmentType <AddressAssignment>]
[-AssignmentDate <DateTime>]
[-MacAddress <String>]
[-ExpiryDate <DateTime>]
[-Description <String>]
[-Owner <String>]
[-AssetTag <String>]
[-SerialNumber <String>]
[-ClientId <String>]
[-Duid <String>]
[-Iaid <UInt32>]
[-ReservationServer <String>]
[-ReservationName <String>]
[-ReservationType <DhcpReservationType>]
[-ReservationDescription <String>]
[-DeviceName <String>]
[-ForwardLookupZone <String>]
[-ForwardLookupPrimaryServer <String>]
[-ReverseLookupZone <String>]
[-ReverseLookupPrimaryServer <String>]
[-AddCustomConfiguration <String>]
[-RemoveCustomConfiguration <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-IpamAddress cmdlet modifies an IP address in IP Address Management (IPAM). Specify the IP addresses to modify or use the InputObject parameter to specify an IpamAddress object to modify.
You can use the cmdlet to associate the Dynamic Host Configuration Protocol (DHCP) reservation properties with the IP address. The cmdlet does not create a reservation on the DHCP server. You can use Windows PowerShell for DHCP Server to create a reservation on the DHCP server.
Examples
Example 1: Reassign an IP address
PS C:\> Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -NewManagedByService "VMM" -NewServiceInstance "vmm1.contoso.com" -DeviceType "VM" -PassThru
IpAddress : 172.16.10.10
NetworkType : NonVirtualized
Duplicate : False
ExpiryStatus : Static
MacAddress :
ManagedByService : VMM
ServiceInstance : vmm1.contoso.com
DeviceName :
DeviceType : VM
IpAddressState : In-Use
AssignmentType : StaticThis command gets an IpamAddress object that contains the IP address 172.16.10.10 that is managed by IPAM. The command passes the IpamAddress object to the Set-IpamAddress cmdlet by using the pipeline operator. The Set-IpamAddress cmdlet changes the service that manages the IP address to VMM, and changes the instance of the service that manages the IP address to vmm1.contoso.com. The command assigns the address to the virtual machine device type.
Example 2: Add custom metadata to an IP address
PS C:\> Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -AddCustomConfiguration "ADSite=Main"This command adds custom metadata to the IP address 172.16.10.10. The command adds the value Main to the custom field named ADSite.
Example 3: Convert the network type of an IP address from non-virtualized to provider
PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -AddressSpace "Default" -NetworkType NonVirtualized -NewNetworkType Provider
IpAddress : 172.16.10.10
NetworkType : Provider
Duplicate : False
ExpiryStatus : Static
MacAddress :
ManagedByService : VMM
ServiceInstance : vmm1.contoso.com
DeviceName :
DeviceType : Host
IpAddressState : In-Use
AssignmentType : StaticThis command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the provider address to the default provider address space.
Example 4: Convert the network type of an IP address from provider to non-virtualized
PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType Provider -NewNetworkType NonVirtualized -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace
IpAddress : 172.16.10.10
NetworkType : NonVirtualized
ProviderAddressSpace : Default
CustomerAddressSpace :This command converts the network type of the IP address 172.16.10.10 from provider to non-virtualized.
By default, the command assigns the non-virtualized address to the Default address space.
The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table.
For more information, type Get-Help Format-List.
Example 5: Assign an IP address to a new address space
PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType NonVirtualized -NewNetworkType Provider -NewAddressSpace MainDataCenter -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace
IpAddress : 172.16.10.10
NetworkType : Provider
ProviderAddressSpace : MainDataCenter
CustomerAddressSpace :This command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the IP address to the provider address space named MainDataCenter. The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table.
Parameters
-AddCustomConfiguration
Specifies semi-colon (;) separated name and value pairs of custom metadata. The cmdlet adds the custom configuration metadata to the IP addresses.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AddressSpace
Specifies the address space that is associated with the IP address. The default value is Default.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AssetTag
Specifies the asset tag associated with the IP address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AssignmentDate
Specifies the date on which you assigned the IP address to a device.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AssignmentType
Specifies how IPAM assigns the addresses. The default value is Static.
The acceptable values for this parameter are:
- Static
- Dynamic
- Auto
- VIP
- Reserved
| Type: | AddressAssignment |
| Accepted values: | Static, Dynamic, Auto, VIP, Reserved |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientId
Specifies the ID of the IPAM client.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Specifies a description of the IP address assignment for a device.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DeviceName
Specifies the name of the device to which you assigned the address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DeviceType
Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in custom field DeviceType.
The acceptable values for this parameter are:
- VM
- Host
The default value is Host.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Duid
Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ExpiryDate
Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ForwardLookupPrimaryServer
Specifies the name of the Domain Name System (DNS) server that IPAM uses to resolve host names to IP addresses.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ForwardLookupZone
Specifies the name of the forward look up zone that contains mapping of host names to IP addresses.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Iaid
Specifies the identity association ID (IAID) of an IPv6 address.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InputObject
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IpAddress
Specifies an array of IP addresses.
| Type: | IPAddress[] |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IpAddressState
Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use.
You can specify a valid custom value for this parameter. Use the Add-IpamCustomValue cmdlet to add a custom value to a custom field in IPAM.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-MacAddress
Specifies the media access control (MAC) address of the device to which the address is assigned.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ManagedByService
Specifies the name of the service that manages the IP address. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.
You can use the Add-IpamCustomValue cmdlet to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue cmdlet to remove a value from the ManagedByService custom field in IPAM.
| Type: | String[] |
| Aliases: | MB |
| Position: | 2 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NetworkType
Specifies the network type of the address.
The acceptable values for this parameter are:
- Provider
- Customer
- NonVirtualized
The default value is NonVirtualized.If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.
| Type: | VirtualizationType[] |
| Accepted values: | NonVirtualized, Provider, Customer |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NewAddressSpace
Specifies the name of the new address space for the IP addresses.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NewIPAddress
Specifies an IP address. The cmdlet assigns the new IP address to the IP addresses.
| Type: | IPAddress |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NewManagedByService
Specifies a new value for the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NewNetworkType
Specifies a new value for network type for the IP addresses. You can change the network type from NonVirtualized to Provider, and from Provider to NonVirtualized. You cannot be change the network type from NonVirtualized or Provider to Customer.
| Type: | VirtualizationType |
| Accepted values: | NonVirtualized, Provider |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NewServiceInstance
Specifies a new value for the instance of the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Owner
Specifies the name of the owner of the IP addresses.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveCustomConfiguration
Specifies a semi-colon (;) separated string of custom field names. The cmdlet removes the custom field names from the IP addresses.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ReservationDescription
Specifies a description for the DHCP reservation.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReservationName
Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReservationServer
Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReservationType
Specifies the protocols supported by the reservation. You must specify a value for this parameter if you specify the ReservationServer parameter.
The acceptable values for this parameter are:
- DHCP
- BootPr
- DHCP and BootPr
| Type: | DhcpReservationType |
| Accepted values: | None, Dhcp, Bootp, Both |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReverseLookupPrimaryServer
Specifies the DNS server that IPAM uses to resolve IP addresses to host names.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReverseLookupZone
Specifies the reverse lookup zone that contains mapping from IP addresses to fully qualified domain names (FQDN).
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SerialNumber
Specifies the serial number of the device to which you assigned the address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ServiceInstance
Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the services that you specified for the ManagedByService parameter. If you specify this parameter, you must specify the IpAddress parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance parameter.
| Type: | String[] |
| Aliases: | SI |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Outputs
IpamAddress
This cmdlet returns an object that represents an IP Address on the IPAM server.