Set-AzApplicationGatewayProbeConfig
Sets the health probe configuration on an existing Application Gateway.
Syntax
Set-AzApplicationGatewayProbeConfig
-ApplicationGateway <PSApplicationGateway>
-Name <String>
-Protocol <String>
[-HostName <String>]
[-Path <String>]
-Interval <Int32>
-Timeout <Int32>
-UnhealthyThreshold <Int32>
[-PickHostNameFromBackendHttpSettings]
[-MinServers <Int32>]
[-Port <Int32>]
[-Match <PSApplicationGatewayProbeHealthResponseMatch>]
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Description
The Set-AzApplicationGatewayProbeConfig cmdlet sets the health probe configuration on an existing Application Gateway.
Examples
Example 1: Set the configuration for a health probe on an application gateway
Set-AzApplicationGatewayProbeConfig -ApplicationGateway Gateway -Name "Probe05" -Protocol Http -HostName "contoso.com" -Path "/path/custompath.htm" -Interval 30 -Timeout 120 -UnhealthyThreshold 8This command sets the configuration for a health probe named Probe05 for the application gateway named Gateway. The command also sets the unhealthy threshold to 8 retries and times out after 120 seconds.
Example 2
Sets the health probe configuration on an existing Application Gateway. (autogenerated)
Set-AzApplicationGatewayProbeConfig -ApplicationGateway Gateway -Interval 30 -Match <PSApplicationGatewayProbeHealthResponseMatch> -Name 'Probe05' -Path '/path/custompath.htm' -PickHostNameFromBackendHttpSettings -Protocol https -Timeout 120 -UnhealthyThreshold 8Parameters
-ApplicationGateway
Specifies the application gateway to which this cmdlet sends a probe.
| Type: | PSApplicationGateway |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DefaultProfile
The credentials, account, tenant, and subscription used for communication with azure.
| Type: | IAzureContextContainer |
| Aliases: | AzContext, AzureRmContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-HostName
Specifies the host name that this cmdlet sends the probe to.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Interval
Specifies the probe interval in seconds. This is the time interval between two consecutive probes. This value is between 1 second and 86400 seconds.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Match
Body that must be contained in the health response. Default value is empty
| Type: | PSApplicationGatewayProbeHealthResponseMatch |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MinServers
Minimum number of servers that are always marked healthy. Default value is 0
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
Specifies the name of the probe.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Path
Specifies the relative path of probe. Valid paths start with the slash character (/). The probe is sent to <Protocol>://<host>:<port><path>.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PickHostNameFromBackendHttpSettings
Whether the host header should be picked from the backend http settings. Default value is false
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Port
Port that is used for probing the backend server
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Protocol
Specifies the protocol used to send probe.
| Type: | String |
| Accepted values: | Http, Https, TCP, TLS |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Timeout
Specifies the probe timeout in seconds. This cmdlet marks the probe as failed if a valid response is not received with this timeout period. Valid values are between 1 second and 86400 seconds.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UnhealthyThreshold
Specifies the probe retry count. The backend server is marked down after consecutive probe failure count reaches the unhealthy threshold. Valid values are between 1 second and 20 seconds.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
