2.2.1.2.213 OSPF_AREA_RANGE_PARAM

The OSPF_AREA_RANGE_PARAM structure MAY<149> be used to contain the OSPF area range parameters. This structure is used by the following methods:

• RRouterInterfaceTransportSetGlobalInfo (section 3.1.4.10) 

• RRouterInterfaceTransportGetGlobalInfo (section 3.1.4.11) 

   typedef struct _OSPF_AREA_RANGE_PARAM {
     DWORD type;
     DWORD create;
     DWORD enable;
     DWORD areaId;
     DWORD rangeNet;
     DWORD rangeMask;
   } OSPF_AREA_RANGE_PARAM, *POSPF_AREA_RANGE_PARAM;
  

type: This MUST be set to OSPF_AREA_RANGE_PARAM_TYPE.

create: Set to 1 if the configuration needs to be created or set to 2 if it needs to be deleted.

enable: Set to 1 if the configuration needs to be enabled or set to 2 if it needs to be deleted.

areaId: Set to 0 if it is a border. Otherwise, set it to any nonzero value.

rangeNet: The IP address of the subnet.

rangeMask: The mask of the IP address subnet.