2.2.1.2.215 OSPF_INTERFACE_PARAM

The OSPF_INTERFACE_PARAM structure MAY<151> be used to contain the OSPF Non-Broadcast Multiple Access (NBMA) neighbor parameters and is used in the following methods:

• RRouterInterfaceTransportAdd (section 3.1.4.18) 

• RRouterInterfaceTransportGetInfo (section 3.1.4.19) 

• RRouterInterfaceTransportSetInfo (section 3.1.4.20) 

   typedef struct _OSPF_INTERFACE_PARAM {
     DWORD type;
     DWORD create;
     DWORD enable;
     DWORD intfIpAddr;
     DWORD intfSubnetMask;
     DWORD areaId;
     DWORD intfType;
     DWORD routerPriority;
     DWORD transitDelay;
     DWORD retransInterval;
     DWORD helloInterval;
     DWORD deadInterval;
     DWORD pollInterval;
     DWORD metricCost;
     BYTE password[8];
     DWORD mtuSize;
   } OSPF_INTERFACE_PARAM, *POSPF_INTERFACE_PARAM;
  

type: This MUST be set to OSPF_INTF_PARAM_TYPE.

create: This MUST be set to 1 if the configuration needs to be created or set to 2 if it needs to be deleted.

enable: This MUST set to 1 if the configuration needs to be enabled or set to 2 if it needs to be deleted.

intfIpAddr: The interface address on which the OSPF is enabled.

intfSubnetMask: The interface subnet address on which the OSPF is enabled. See [RFC950].

areaId: The area ID of the OSPF area of which the interface is a part.

intfType: Set to 1 for broadcast, set to 2 for NBMA, and set to 3 for point-to-point.

routerPriority: This MUST be set to a value between 1 and 255.

transitDelay: This MUST be set to a value between 1 and 3600.

retransInterval: This MUST be set to a value between 1 and 3600.

helloInterval: This MUST be set to a value between 1 and USHORTMAX/2.

deadInterval: This MUST be set to a value between 1 and USHORTMAX/2.

pollInterval: This MUST be set to a value between 1 and USHORTMAX/2.

metricCost: This MUST be set to a value between 1 and USHORTMAX/2.

password[8]: The password.

mtuSize: This MUST be set to a value between 1 and 10000.