Partager via

2.2.4.32.2 Response

  • Article
 SMB_Parameters
   {
   UCHAR  WordCount;
   UCHAR  AndXCommand;
   UCHAR  AndXReserved;
   UCHAR  AndXOffset;
   }
 SMB_Data
   {
   USHORT ByteCount;
   }
           


0


1


2


3


4


5


6


7


8


9

1
0


1


2


3


4


5


6


7


8


9

2
0


1


2


3


4


5


6


7


8


9

3
0


1

SMB_Parameters

...

SMB_Data

SMB_Parameters (5 bytes):


0


1


2


3


4


5


6


7


8


9

1
0


1


2


3


4


5


6


7


8


9

2
0


1


2


3


4


5


6


7


8


9

3
0


1

WordCount

Words

...

WordCount (1 byte): This field MUST be 0x02.

Words (4 bytes):


0


1


2


3


4


5


6


7


8


9

1
0


1


2


3


4


5


6


7


8


9

2
0


1


2


3


4


5


6


7


8


9

3
0


1

AndXCommand

AndXReserved

AndXOffset

AndXCommand (1 byte): The command code for the next SMB command in the packet. This value MUST be set to 0xFF if there are no additional SMB command responses in the server response packet.

AndXReserved (1 byte): A reserved field. This MUST be set to 0x00 when this response is sent, and the client MUST ignore this field.

AndXOffset (2 bytes): This field MUST be set to the offset, in bytes, from the start of the SMB Header (section 2.2.3.1) to the start of the WordCount field in the next SMB command response in this packet. This field is valid only if the AndXCommand field is not set to 0xFF. If AndXCommand is 0xFF, this field MUST be ignored by the client.

SMB_Data (2 bytes):


0


1


2


3


4


5


6


7


8


9

1
0


1


2


3


4


5


6


7


8


9

2
0


1


2


3


4


5


6


7


8


9

3
0


1

ByteCount

ByteCount (2 bytes): This field MUST be 0x0000. No data is sent by this message.

Error Codes

SMB error class

SMB error code

NT status code

POSIX equivalent

Description

ERRDOS (0x01)

ERRnoaccess

(0x0005)

STATUS_ACCESS_DENIED

(0xC0000022)

EACCESS

File access rights do not match requested locks.

ERRDOS (0x01)

ERRbadfid

(0x0006)

STATUS_INVALID_HANDLE

(0xC0000008)

STATUS_SMB_BAD_FID

(0x00060001)

ENFILE

Attempt to read from a FID that the server does not have open.

ERRDOS (0x01)

ERRnomem

(0x0008)

STATUS_INSUFF_SERVER_RESOURCES

(0xC0000205)

ENOMEM

Insufficient server resources to place the lock.

ERRDOS (0x01)

ERRlock

(0x0021)

STATUS_FILE_LOCK_CONFLICT

(0xC0000054)

EACCESS

The intended byte range has already been locked.

ERRDOS (0x01)

ERRlock

(0x0021)

ENOLOCK

Insufficient server resources to place the lock.

ERRDOS (0x01)

ERROR_NOT_LOCKED

(0x009E)

STATUS_RANGE_NOT_LOCKED

(0xC000007E)

The byte range specified in an unlock request was not locked.

ERRDOS (0x01)

ERROR_CANCEL_VIOLATION

0x00AD

STATUS_OS2_CANCEL_VIOLATION

0x00AD0001

No lock request was outstanding for the supplied cancel region.

ERRSRV (0x02)

ERRerror

(0x0001)

EBADF

A valid FID was rejected by the underlying system.

ERRSRV (0x02)

ERRerror

(0x0001)

EDEADLK

The lock request would block and cause a deadlock with another process.

ERRSRV (0x02)

ERRerror

(0x0001)

STATUS_INVALID_SMB

(0x00010002)

Invalid SMB. Not enough parameter bytes were sent or the ANDX command is invalid.

ERRSRV (0x02)

ERRinvdevice

(0x0007)

STATUS_BAD_DEVICE_TYPE

(0xC00000CB)

Attempt to lock a non-regular file such as a named pipe.

ERRSRV (0x02)

ERRinvtid

(0x0005)

STATUS_SMB_BAD_TID

(0x00050002)

Invalid TID in request.

ERRSRV (0x02)

ERRbaduid (0x005B)

STATUS_SMB_BAD_UID

(0x005B0002)

The UID specified is not defined as a valid ID for this session, or the user identified by the UID does not have sufficient privileges.

ERRHRD

(0x03)

ERRdata

(0x0017)

STATUS_DATA_ERROR

(0xC000003E)

EIO

Disk I/O error.