Lead Sync API Migration

Article
11/20/2024

Warning

Deprecation Notice
The Marketing Version 202311 (Marketing November 2023) and earlier versions (excluding 202306 and 202307) have been sunset. Additionally, the unversioned APIs will be sunset soon. We recommend that you migrate to the versioned APIs as well as migrate to the new Content and Community Management APIs to avoid disruptions. See the Migration page for more details. If you haven’t yet migrated and have questions, submit a request on the LinkedIn Developer Support Portal.

LinkedIn Marketing Solutions is releasing a new Lead Sync API product. This migration guide facilitates the onboarding of existing developers to the new product and endpoints. If you fall into one or more of these categories, this migration guide is for you:

Currently have access to Ads Lead Sync and or Events Lead Generation and syncs leads
Currently have access to Advertising API and creates forms

NOTE: There are no schema changes for the Events Lead Generation API

Permissions for Lead Sync API

With the launch of the Lead Sync API, we’re introducing the following new permissions and endpoints to simplify syncing leads across different lead types:

Old API endpoint	Old Permission Name	Supported Lead Types	Last Supported Version	Last Supported Version will stop working on
/adFormQuestions	r_ads_leadgen_automation	SPONSORED	202307	December 16, 2024
/adForms	r_ads_leadgen_automation	SPONSORED	202307	December 16, 2024
/adFormResponses	r_ads_leadgen_automation	SPONSORED	202307	December 16, 2024
/adForms/Consents	r_ads_leadgen_automation	SPONSORED	202307	December 16, 2024
/leadNotificationUrls	r_ads_leadgen_automation	SPONSORED	202307	December 16, 2024
/leadGenFormQuestions	r_events_leadgen_automation	EVENT	202307	December 16, 2024
/leadGenForms	r_events_leadgen_automation	EVENT	202307	December 16, 2024
/eventFormResponses	r_events_leadgen_automation	EVENT	202307	December 16, 2024
/leadGenFormLegalInfo	r_events_leadgen_automation	EVENT	202307	December 16, 2024
/leadGenForms	r_events_leadgen_automation	EVENT	202307	December 16, 2024
/eventLeadNotifications	r_events_leadgen_automation	EVENT	202307	December 16, 2024
/leadGenFormVersions	r_events_leadgen_automation	EVENT	202307	December 16, 2024
/events	r_events_leadgen_automation	EVENT	202306	December 16, 2024

New API	New Permission Name	Supported Version starts from
/leadForms	r_marketing_leadgen_automation rw_ads r_ads	202307
/leadFormResponses	r_marketing_leadgen_automation	202307
/leadNotifications	r_marketing_leadgen_automation	202307
/events	r_events	202307

AdFormResponses API → LeadFormResponses API

Workflow Changes

The new Lead Sync API supports fetching different types of leads based on the request (SPONSORED, EVENTS etc.)
The new associatedEntity field represents which entity the lead is collected from e.g. for the Sponsored use case, associatedEntity is the corresponding SponsoredCreativeUrn ad for the Event use case, associatedEntity is the corresponding EventUrn.
The /leadFormResponses API supports two different types of Owners. For the Sponsored use case, the owner is SponsoredAccountUrn. For Organic use cases like Event lead sync, the owner is OrganizationUrn.

Schema Changes

Schema

AdFormResponses API	LeadGenFormResponses API
id	id
adFormUrn	versionedLeadGenFormUrn
sponsoredAccountUrn	LeadGenFormOwner: SponsoredAccountUrn for Sponsored usecase, OrganizationUrn for other usecases.
SponsoredCampaignUrn	SponsoredLeadMetadata: SponsoredCampaignUrn for Sponsored use case. Currently we don’t have other metadata information collected for non-sponsored usecase.
SponsoredCreativeUrn	associatedEntity Union: - SponsoredCreativeUrn for Sponsored usecase - OrganizationUrn for Company Page usecase - EventUrn for Event usecase - StandardizedProductUrn for Product Page usecase - OrganizationLandingPageUrn for Landing Page usecase.
leadType	leadType
testLead	testLead
submittedAt	submittedAt

AdForms API→ LeadForms API

Workflow Changes

The new API supports both sponsored (previously called adForms) and organic LeadGen Forms with a single integration.
SponsoredAccount field is removed in favor of an Owner record which is a union of SponsoredAccountUrn and an OrganizationUrn.
Sponsored forms will have a sponsored account as an owner whereas organic forms will have organization as the owner.
Form fields now support multi locale strings. This means instead of providing just the string values marketers will need to provide locale and string value.
- e.g. question field of a form being created in English locale
```
"question": {
    "localized": {
       "en_US": "Last Name"
     }
  }
```
  Here Last Name is the question string value to be used for en_US locale.
- e.g. question field of a form being created in Spanish locale
```
"question": {
   "localized": {
      "es_ES": "Apellido"
    }
  }
```
  Here Apellido is the question string value to be used for es_ES locale.
Finder API supports fetching forms under sponsored account or an organization (organic forms).

Schema Changes

Schema

AdForms API	LeadForms API	Notes
id	id & versionId	id is still the unique identifier of the form. Version Id is for managing form edits.
locale	creationLocale
reviewInfo	reviewInfo
changeAuditStamps	Flattened and simplified to `created` and `lastModified` fields
status	state	`SUBMITTED` maps to `PUBLISHED` `DRAFT` maps to `DRAFT` `ARCHIVED` maps to `ARCHIVED`
form.hiddenFields	hiddenFields
account	owner. Union of SponsoredAccountUrn for Sponsored usecase, OrganizationUrn for other usecases.
form.name	name
form field	Renamed to `content` - `headline` & `description` are now multilocale strings Within `form.questions` : - `question` is now a multilocale string - `typeSpecificQuestionDetails` renamed to `questionDetails` - `questionSubmissionCriteria` is a new field to setup question submission criteria - `label` is a new field serves as a unique identifier within the form to specify the question
`form.consents`, `form.privacyPolicy`, `form.legalDisclaimer`	Moved under `content.legalInfo` - `legalDisclaimer` is now a multilocale string - `privacyPolicy` renamed to `privacyPolicyUrl` Within `form.consents` : - `consentId` renamed to `id` - `consentRequired` renamed to `checkRequired` - `consent` is now a multilocale string
`form.landingPage`, `form.thankYouMessage`, `form.thankYouPageCallToAction`	Moved under `content.postSubmissionInfo` -`thankYouMessage` is now a multilocale string

LeadNotificationUrls → LeadNotifications API

Workflow Changes

LeadNotifications API supports storing notification URLs (webhooks) disassociated with ad entities (i.e. old API requires an account/campaign/creative to be tied to the notification object).
Support storing notification URLs at varying levels of granularity, most notably at the form level.
Support storing URLs for the same form/owner under different lead types, such as SPONSORED and EVENT.
Support push notifications for lead submissions as well as deletions.

Schema Changes

Schema

LeadNotificationUrls API	LeadNotifications API	Notes
key	Instead of a key, please use the following fields to specify the level of granularity that notifications should be sent: - `owner` - `leadType` - `versionedFormUrn` - `associatedEntity`	For example, to subscribe to notifcations at the sponsored account level, set the `owner` field to your specific `SponsoredAccountUrn` and set `leadType` to SPONSORED.
status	Removed.	All subscriptions are active by default. To stop receiving a notifications under a subscription, please delete it.
URL	webhook

Notification Payload

LeadNotificationUrls API	LeadNotifications API	Notes
createdTime	occuredAt
accountUrn	owner	For the SPONSORED lead type the owner is a sponsored account urn. For all other lead types the owner is an organization urn.
campaignUrn	Removed.	Only sponsored leads will have a campaignUrn, in this case the campaign and related sponsored metadata can be obtained by fetching the lead directly.
creativeUrn	associatedEntity	For the SPONSORED lead type the creative urn will be returned via the associatedEntity field. For other lead types this field may resolve to other urns.
formUrn	leadGenForm	This will be a `VersionedLeadGenFormUrn` instead of an `AdFormUrn`.
adFormResponseUrn	leadGenFormResponse	This will be a `LeadGenFormResponseUrn` instead of an `AdFormResponseUrn`
N/A	type	Will always be set to "LEAD_ACTION"
N/A	leadType	Type of the lead, will be set to "SPONSORED" for sponsored leads
N/A	leadAction	Action performed on the lead, will be either "CREATED" or "DELETED"

For example, consider the following JSON in the old payload format:

{ 
  "createdTime": 1489428028784, 
  "accountUrn": "urn:li:sponsoredAccount:67890", 
  "campaignUrn": "urn:li:sponsoredCampaign:789012", 
  "creativeUrn": "urn:li:sponsoredCreative:11223344", 
  "formUrn": "urn:li:adForm:123456", 
  "adFormResponseUrn": "urn:li:adFormResponse:abc123-abab-abab-abab-abc123abc123" 
}

The equivalent JSON in the new payload format would look like:

{
    type: “LEAD_ACTION”,
    leadGenFormResponse: "urn:li:leadGenFormResponse:abc123-abab-abab-abab-abc123abc123",
    leadGenForm: "urn:li:versionedLeadGenForm:(urn:li:leadGenForm:123456, 1)",
    owner: {"sponsoredAccount": "urn:li:sponsoredAccount:67890"},
    associatedEntity:  {"sponsoredCreative": "urn:li:sponsoredCreative:11223344"},
    leadType: "SPONSORED"
    leadAction: "CREATED"
    occurredAt: 1489428028784
}

Duplicate Webhooks

Please note that legacy webhooks (LeadNotificationUrls) will continue to receive notifications in the old payload format until the legacy APIs reach end of life. This means that you will receive duplicate notifications if you have also subscribed using the same parameters via the new LeadNotifications API. Proper deduplication logic should be put in place.

Setting up a webhook via LeadNotificationUrls API vs LeadNotifications API

LeadNotificationUrls API create request for a sponsored account webhook

curl

curl -X POST 'https://api.linkedin.com/rest/leadNotificationUrls' \
--H 'X-Restli-Protocol-Version: 2.0.0' \
--H 'Authorization: Bearer {INSERT_TOKEN}' \
--H 'LinkedIn-Version: {version number in the format YYYYMM}' \
--H 'Content-Type: application/json' \
--data '{
    "key": {
        "developerApplication": "urn:li:developerApplication:12345",
        "sponsoredEntity": "urn:li:sponsoredAccount:67890"
    },
    "status": "ACTIVE",
    "url": "[https://www.example.com](https://eogi5ry4pv6izmq.m.pipedream.net)"
}'

LeadNotifications API create request for a sponsored account webhook

curl

curl -X POST 'https://api.linkedin.com/rest/leadNotifications”' \
--H 'X-Restli-Protocol-Version: 2.0.0' \
--H 'Authorization: Bearer {INSERT_TOKEN}' \
--H 'LinkedIn-Version: {version number in the format YYYYMM}' \
--H 'Content-Type: application/json' \
--data '{
    "webhook": "https://eogi5ry4pv6izmq.m.pipedream.net",
    "owner": {
        "sponsoredAccount": "urn:li:sponsoredAccount:67890"
    },
    "leadType": "SPONSORED"
}'

FAQ

Q: If my developer app already had access to the legacy APIs and permissions, do I need to request access to the new Lead Sync API?

No. Your existing developer app should already have access to the new endpoints and permissions.

Q: What if I’ve migrated to the new lead sync APIs but I have not migrated any existing webhook subscriptions yet? This means I’m still receiving the legacy webhook notification payload but using the new Lead Sync APIs to get back the form response data. Can I use the new GET /leadFormResponses/{id} endpoint using the id in the legacy webhook notification payload? E.g. urn:li:adFormResponse:abc123-abab-abab-abab-abc123abc123

Yes, however please note that the new /leadFormResponses/{id} endpoint takes in an ID, abc123-abab-abab-abab-abc123abc123, and not an URN.

Response Decoration Migration

Below are examples of the top API response decoration usage and how to achieve the same via the new Lead Sync APIs. Some fields are not returned by default in the API request response therefore, to get all fields you may require, you will need to use field projection. Field projection allows you to choose exactly what fields you'd like returned in the request response.

If the additional metadata you seek is not returned, making a separate API request may be required. For example, to get the campaign group, make an API request to the GET campaign by ID endpoint and view the campaignGroupInfo field.

Response decoration migration for adFormResponses API

adFormResponses	leadFormResponses	field projection example
form~(form(hiddenFields, landingPage, name, id))	`form.hiddenFields` --> `form.hiddenFields[]` `form.landingPage` --> `form.content.postSubmissionInfo.callToAction.callToActionTarget.landingPageUrl` `form.name` --> `form.name` `form.id` --> `form.id`	`fields=form:(hiddenFields,name,id,content:(postSubmissionInfo:(callToAction:(callToActionTarget:(landingPageUrl)))))`
question~(name, question, typeSpecificQuestionDetails, predefinedField, questionId)	`question.name` --> `form.content.questions[].name` `question.question` --> `form.content.questions[].question` `question.typeSpecificQuestionDetails` --> `form.content.questions[].questionDetails` `question.predefinedfield` --> `form.content.questions[].predefinedField` `question.questionId` --> `form.content.questions[].questionId`	`fields=form:(content:(questions))`
consent~(content, consentId, consentRequired)	`consent.content` --> `form.content.legalInfo.consents[].consent` `consent.consentId` --> `form.content.legalInfo.consents[].Id` `consent.consentRequired` --> `form.content.legalInfo.consents[].checkRequired`	`fields=form:(content:(legalInfo:(consents)))`
account~(id, name)	`account.id` --> `owner.sponsoredAccount` (parse out just the numbers) `account.name` --> `ownerInfo.sponsoredAccountInfo.name`	`fields=owner,ownerInfo:(sponsoredAccountInfo)`
campaign~(id, name, type)	`campaign.id` --> `leadMetadataInfo.sponsoredLeadMetadataInfo.campaign.id` (parse out just the numbers) `campaign.name` --> `leadMetadataInfo.sponsoredLeadMetadataInfo.campaign.name` `campaign.type` --> `leadMetadataInfo.sponsoredLeadMetadataInfo.campaign.type`	`fields=leadMetadataInfo:(sponsoredLeadMetadataInfo:(campaign:(id,name,type)))`
creative~(id, intendedStatus, content)	`creative.id` --> `associatedEntityInfo.associatedCreative.id` (parse out just the numbers) `creative.intendedStatus` --> `associatedEntityInfo.associatedCreative.intendedStatus` `creative.content` --> `associatedEntityInfo.associatedCreative.content.reference` (make additional API call to the /posts endpoint to get additional metadata if required)	`fields=associatedEntityInfo:(associatedCreative:(id,intendedStatus,content:(reference)))`

Response decoration migration for eventFormResponses API

eventFormResponses	leadFormResponses	field projection example
form~(hiddenFields, landingPage, name, id)	`form~.hiddenFields` --> `form.hiddenFields[]` `form~.landingPage` --> `form.content.postSubmissionInfo.callToAction.landingPageUrl` `form~.name` --> `form.name` `form~.id` --> `form.id`	`fields=form:(hiddenFields,name,id,content:(postSubmissionInfo:(callToAction:(callToActionTarget:(landingPageUrl)))))`
event~(name,id)	`event~.name` --> make an additional api call to the /events endpoint using the id `event~.id` --> `id`	`/leadFormResponses?fields=id`
question~(name)	`question~.name` --> `form.content.questions[].name`	`fields=form:(content:(questions))`

The examples in the table above are very specific to show how granular you can get with field projection however, for the data we want, getting that granular isn't necessary. The following example simplifies the request as either way, the json request response will need to be parsed. fields=ownerInfo,associatedEntityInfo,leadMetadataInfo,owner,leadType,versionedLeadGenFormUrn,id,submittedAt,testLead,formResponse,form:(hiddenFields,creationLocale,name,id,content).

Partager via

Lead Sync API Migration

Permissions for Lead Sync API

AdFormResponses API → LeadFormResponses API

Workflow Changes

Schema Changes

Schema

AdForms API→ LeadForms API

Workflow Changes

Schema Changes

Schema

LeadNotificationUrls → LeadNotifications API

Workflow Changes

Schema Changes

Schema

Notification Payload

Duplicate Webhooks

Setting up a webhook via LeadNotificationUrls API vs LeadNotifications API

FAQ

Response Decoration Migration

Response decoration migration for adFormResponses API

Response decoration migration for eventFormResponses API

Commentaires

Ressources supplémentaires