Partager via

Feb CTP and Device Development

  • Article

If you are a device developer (or evaluating device development in VS 2005) please continue to use the November CTP for that. Information on November CTP and the patches needed is also in given our blog below.

Thanks

Amit Chopra

Comments

  • Anonymous
    March 09, 2005
    The comment has been removed
  • Anonymous
    March 09, 2005
    The directions I followed were from :http://blogs.msdn.com/vsdteam/
    January 05, 2005

    In the above "Did device config.." was from within VS2005 (Nov), same with last points.

    ie I created a CE5 build deployed and launched on x86 device.
    Then tried to deploy VS2005 Smartdevice app to it from VS2005 (Nov) not using activesynch. (No USB device on target so can't use activesync, unless I use serial).
  • Anonymous
    March 09, 2005
    And.. my VS2005 setup will download and run apps to my mobile phone via activesync. Been through all the fixes there.
  • Anonymous
    March 16, 2005
    hi,I install Nov2004 CTP in VPC.OS is Windows Server 2003 Chinese Standard Edition.I replace smartdeviceproject.dll,but it show the same error,"There were deployment errors.Continus?"
    Pls give me some advice.
  • Anonymous
    March 17, 2005
    Hi David

    Can you please verify 1. "conmanclient2.exe ..." launched successfully? (This executable should not return, if launched from the command window).
    2. The network connection to the CEPC device is good. (Try ping the IP address of the CEPC device from your computer)
    3. please let me know what the error message you get when deployment failed?

    Thanks,
    Edward
  • Anonymous
    March 17, 2005
    For the question related to deployment error on VPC.OS Chinese 2003 Server.

    Can you please verify
    1. You've applied all the fixes for Nov. CTP?
    2. Are you trying deploy a managed application or a native application? and what is the target device?

    Thanks,
    Edward
  • Anonymous
    March 17, 2005
    Hi Edward:
    1,I install Nov.CTP and smartdeviceproject.dll, Have any fixes?
    2,I deploy a managed app to PPC 2003 SE Emulator.
    3,I use XP SP2 + VPC, still can not deploy.
  • Anonymous
    March 18, 2005
    What is the error message you get when deployment fails?
    Did you see the Deployment target dialog appears after you deploy solution? (After you hit F5 or select deployment solution, there should be a dialog appears so that you can choose the deployment target)
    Also can you please verify that the device emulator get a Valid IP address? (On the device emulator choose "Start" --> "Settings" -->"Connections" --> "Network cards" and then choose the network adaptor that the emulator is using.)

    Thanks,
    Edward
  • Anonymous
    March 20, 2005
    Hi Edward:
    1,I get the error message in Chinese,the mean is "the product setup information is attaint.Please contact with technic support."
    2,Yes,I see the Deployment Dialog after I hit F5.
    3,I use Loopback Adapter,set IP address is "192.168.0.1",and emluator's network card is "NE2000 Compatilble Ethernet Driver",IP address:169.254.95.66.
    Thanks,
    Ma Ning
  • Anonymous
    March 21, 2005
    Hi Ning

    I think this is a known issue in our Nov. CTP, which should be fixed in Beta 2 build. But in Nov. CTP you can still use device emulator on a Non-VPC machine without Loopback Adaptor being installed.

    Thanks,
    Edward
  • Anonymous
    March 21, 2005
    I see,I hope you fix the bug in beta 2.Watting for your beta 2.
    Thanks
  • Anonymous
    March 30, 2005
    February CTP
  • Anonymous
    January 21, 2009
    PingBack from http://www.keyongtech.com/461197-sqlmobile-installation-on-pocketpc