Muokkaa

Jaa

App Control Admin Tips & Known Issues

Note

Some capabilities of App Control for Business are only available on specific Windows versions. Learn more about App Control feature availability.

This article covers tips and tricks for admins and known issues with App Control for Business. Test this configuration in your lab before enabling it in production.

App Control policy file locations

Multiple policy format App Control policies are found in the following locations depending on whether the policy is signed or not, and the method of policy deployment that was used.

  • <OS Volume>\Windows\System32\CodeIntegrity\CiPolicies\Active\{PolicyId GUID}.cip
  • <EFI System Partition>\Microsoft\Boot\CiPolicies\Active\{PolicyId GUID}.cip

The {PolicyId GUID} value is unique by policy and defined in the policy XML with the <PolicyId> element.

For single policy format App Control policies, in addition to the two preceding locations, also look for a file called SiPolicy.p7b in the following locations:

  • <EFI System Partition>\Microsoft\Boot\SiPolicy.p7b
  • <OS Volume>\Windows\System32\CodeIntegrity\SiPolicy.p7b

Note

A multiple policy format App Control policy using the single policy format GUID {A244370E-44C9-4C06-B551-F6016E563076} may exist under any of the policy file locations.

File Rule Precedence Order

When the App Control engine evaluates files against the active set of policies on the device, rules are applied in the following order. Once a file encounters a match, App Control stops further processing.

  1. Explicit deny rules - a file is blocked if any explicit deny rule exists for it, even if other rules are created to try to allow it. Deny rules can use any rule level. Use the most specific rule level practical when creating deny rules to avoid blocking more than you intend.

  2. Explicit allow rules - if any explicit allow rule exists for the file, the file runs.

  3. App Control then checks for the Managed Installer extended attribute (EA) or the Intelligent Security Graph (ISG) EA on the file. If either EA exists and the policy enables the corresponding option, then the file is allowed.

  4. Lastly, App Control makes a cloud call to the ISG to get reputation about the file, if the policy enables the ISG option.

  5. Any file not allowed by an explicit rule or based on ISG or MI is blocked implicitly.

Known issues

Boot stop failure (blue screen) occurs if more than 32 policies are active

Until you apply the Windows security update released on or after April 9, 2024, your device is limited to 32 active policies. If the maximum number of policies is exceeded, the device bluescreens referencing ci.dll with a bug check value of 0x0000003b. Consider this maximum policy count limit when planning your App Control policies. Any Windows inbox policies that are active on the device also count towards this limit. To remove the maximum policy limit, install the Windows security update released on, or after, April 9, 2024 and then restart the device. Otherwise, reduce the number of policies on the device to remain below 32 policies.

Note

The policy limit was not removed on Windows 11 21H2, and will remain limited to 32 policies.

Audit mode policies can change the behavior for some apps or cause app crashes

Although App Control audit mode is designed to avoid impact to apps, some features are always on/always enforced with any App Control policy that turns on user mode code integrity (UMCI) with the option 0 Enabled:UMCI. Here's a list of known system changes in audit mode:

  • Some script hosts might block code or run code with fewer privileges even in audit mode. See Script enforcement with App Control for information about individual script host behaviors.
  • Option 19 Enabled:Dynamic Code Security is always enforced if any UMCI policy includes that option. See App Control and .NET.

.NET native images may generate false positive block events

In some cases, the code integrity logs where App Control for Business errors and warnings are written include error events for native images generated for .NET assemblies. Typically, native image blocks are functionally benign as a blocked native image falls back to its corresponding assembly and .NET regenerates the native image at its next scheduled maintenance window.

Signatures using elliptical curve cryptography (ECC) aren't supported

App Control signer-based rules only work with RSA cryptography. ECC algorithms, such as ECDSA, aren't supported. If App Control blocks a file based on ECC signatures, the corresponding 3089 signature information events show VerificationError = 23. You can authorize the files instead by hash or file attribute rules, or using other signer rules if the file is also signed with signatures using RSA.

MSI installers are treated as user writeable on Windows 10 when allowed by FilePath rule

MSI installer files are always detected as user writeable on Windows 10, and on Windows Server 2022 and earlier. If you need to allow MSI files using FilePath rules, you must set option 18 Disabled:Runtime FilePath Rule Protection in your App Control policy.

MSI Installations launched directly from the internet are blocked by App Control

Installing .msi files directly from the internet to a computer protected by App Control fails. For example, this command fails:

msiexec -i https://download.microsoft.com/download/2/E/3/2E3A1E42-8F50-4396-9E7E-76209EA4F429/Windows10_Version_1511_ADMX.msi

As a workaround, download the MSI file and run it locally:

msiexec -i c:\temp\Windows10_Version_1511_ADMX.msi

Slow boot and performance with custom policies

App Control evaluates all processes that run, including inbox Windows processes. You can cause slower boot times, degraded performance, and possibly boot issues if your policies don't build upon the App Control templates or don't trust the Windows signers. For these reasons, you should use the App Control base templates whenever possible to create your policies.

AppId Tagging policy considerations

AppId Tagging policies that aren't built upon the App Control base templates or don't allow the Windows in-box signers might cause a significant increase in boot times (~2 minutes).

If you can't allowlist the Windows signers or build off the App Control base templates, add the following rule to your policies to improve the performance:

Allow all dlls in the policy.

Allow all dll files in the xml policy.

Since AppId Tagging policies evaluate but can't tag dll files, this rule short circuits dll evaluation and improve evaluation performance.