Muokkaa

Jaa

AD FS and certificate KeySpec property information

Key Specification (“KeySpec”) is a property associated with a certificate and key. It specifies whether a private key associated with a certificate can be used for signing, encryption, or both.

An incorrect KeySpec value can cause AD FS and Web Application Proxy errors such as:

  • Failure to establish a SSL/TLS connection to AD FS or the Web Application Proxy, with no AD FS events logged (though SChannel 36888 and 36874 events can be logged)
  • Failure to sign in at the AD FS or WAP forms based authentication page, with no error message shown on the page.

You might see the following event in the event log:

Log Name:   AD FS Tracing/Debug
Source: AD FS Tracing
Date:   2/12/2015 9:03:08 AM
Event ID:   67
Task Category: None
Level:  Error
Keywords:   ADFSProtocol
User:   S-1-5-21-3723329422-3858836549-556620232-1580884
Computer:   ADFS1.contoso.com
Description:
Ignore corrupted SSO cookie.

What causes the problem

The KeySpec property identifies how a key that is generated or retrieved using the Microsoft CryptoAPI (CAPI) from a Microsoft legacy Cryptographic Storage Provider (CSP) can be used.

A KeySpec value of 1, or AT_KEYEXCHANGE, can be used for signing and encryption. A value of 2, or AT_SIGNATURE, is only used for signing.

The most common KeySpec mis-configuration is using a value of 2 for a certificate other than the token signing certificate.

For certificates whose keys were generated using Cryptography Next Generation (CNG) providers, there's no concept of key specification, and the KeySpec value is always zero.

Learn how to check for a valid KeySpec value in the next section of this article.

Example

An example of a legacy CSP is the Microsoft Enhanced Cryptographic Provider.

Microsoft RSA CSP key blob format includes an algorithm identifier, either CALG_RSA_KEYX or CALG_RSA_SIGN, respectively, to service requests for either AT_KEYEXCHANGE **or **AT_SIGNATURE keys.

The RSA key algorithm identifiers map to KeySpec values as follows

Provider supported algorithm Key Specification value for CAPI calls
CALG_RSA_KEYX : RSA key that can be used for signing and decryption AT_KEYEXCHANGE (or KeySpec=1)
CALG_RSA_SIGN : RSA signature only key AT_SIGNATURE (or KeySpec=2)

KeySpec values and associated meanings

The following are the meanings of the various KeySpec values:

Keyspec value Means Recommended AD FS use
0 The certificate is a CNG cert SSL certificate only
1 For a legacy CAPI (non-CNG) cert, the key can be used for signing and decryption SSL, token signing, token decrypting, service communication certificates
2 For a legacy CAPI (non-CNG) cert, the key can be used only for signing not recommended

How to check the KeySpec value for your certificates / keys

To see a certificate's value you can use the certutil command line tool.

The following is an example: certutil –v –store my. This command dumps the certificate information to the screen.

Keyspec cert

Under CERT_KEY_PROV_INFO_PROP_ID look for two things:

  • ProviderType: This denotes whether the certificate uses a legacy Cryptographic Storage Provider (CSP) or a Key Storage Provider based on newer Certificate Next Generation (CNG) APIs. Any nonzero value indicates a legacy provider.

  • KeySpec: The following table shows the valid KeySpec values for an AD FS certificate:

    Legacy CSP provider (ProviderType not equal to 0):

    AD FS Certificate Purpose Valid KeySpec Values
    Service Communication 1
    Token Decrypting 1
    Token Signing 1 and 2
    SSL 1

    CNG provider (ProviderType = 0):

    AD FS Certificate Purpose Valid KeySpec Values
    SSL 0

How to change the keyspec for your certificate to a supported value

Changing the KeySpec value doesn't require the certificate to be regenerated or reissued. The KeySpec can be changed by reimporting the complete certificate and private key from a PFX file into the certificate store using the following steps.

  1. Check and record the private key permissions on the existing certificate so that they can be reconfigured if necessary after the reimport.
  2. Export the certificate including private key to a PFX file.
  3. Perform the following steps for each AD FS and WAP server.
    1. Delete the certificate (from the AD FS / WAP server).
    2. Open an elevated PowerShell command prompt.
    3. Import the PFX file on each AD FS and WAP server using the following syntax, specifying the AT_KEYEXCHANGE value (which works for all AD FS certificate purposes):
      1. certutil –importpfx certfile.pfx AT_KEYEXCHANGE
      2. Enter PFX password.
    4. After the above process completes, do the following:
      1. Check the private key permissions.
      2. Restart the AD FS or WAP service.