Receive Segment Coalescing (RSC) offload

Artikkeli
05/22/2024

When receiving data, most layers in the TCP/IP stack must look at each segment's header information separately. This creates a large amount of overhead when large amounts of data are being received.

Receive segment coalescing (RSC) reduces this overhead by coalescing a sequence of received segments and indicating them up the TCP/IP stack in one single coalesced segment. The upper layers in the TCP/IP stack only need to look at one header for the entire sequence.

A network interface card (NIC) that supports RSC in hardware can greatly improve the receive path performance. It can also reduce the host CPU utilization as it frees the protocol layer from doing RSC in software.

For more details on RSC, see Overview of Receive Segment Coalescing.

NetAdapterCX also supports UDP RSC (URO) starting in version 2.5. For more details, see UDP RSC Offload (URO).

INF keywords for controlling RSC offload

NetAdapterCx checks the registry keywords and honors them when enabling the active offload capabilities. The driver doesn't need to take any further action.

The RSC keywords specified in Standardized INF Keywords for RSC can be used to enable/disable the RSC offload with a registry key setting.

The keyword values must be of type REG_SZ.

Configuring RSC offload

Client drivers first advertise their hardware's RSC capabilities during net adapter initialization. This might occur within their EvtDevicePrepareHardware callback before starting a net adapter.

To configure RSC capabilities, the client driver:

Allocates a NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES structure.
Calls NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES_INIT to initialize the structure.
Calls NetAdapterOffloadSetRscCapabilities to register the structure with NetAdapterCx.

During the call to NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES_INIT the client driver provides a pointer to the EVT_NET_ADAPTER_OFFLOAD_SET_RSC callback. The system invokes this callback later if active offload capabilities change.

Rules for indicating hardware RSC capabilities

Client drivers must NOT perform software RSC on any type of traffic that doesn't have hardware support in the NIC.

The following rules apply to the NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES structure:

NetAdapterOffloadLayer3FlagIPv4NoOptions and NetAdapterOffloadLayer3FlagIPv6NoExtensions are the only valid values for the Layer3Flags field. These flags indicate IPv4 and IPv6 support respectively.
NetAdapterOffloadLayer4FlagTcpNoOptions and NetAdapterOffloadLayer4FlagUdp are the only valid values for the Layer4Flags field. These flags indicate TCP and UDP support respectively.
Layer 3 flags must be set if the NetAdapterOffloadLayer4FlagTcpNoOptions flag is set.
The TcpTimestampOption field is optional. Client drivers set this field after calling NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES_INIT and before calling NetAdapterOffloadSetRscCapabilities to indicate whether the NIC supports the TCP timestamp option.

The following example shows how a client driver might set up its RSC hardware offload capabilities.

VOID
MyAdapterSetRscOffloadCapabilities(
    NETADAPTER NetAdapter
)
{
    // Configure the hardware's RSC offload capabilities
    NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES rscOffloadCapabilities;
    NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES_INIT(
        &rscOffloadCapabilities,
        NetAdapterOffloadLayer3FlagIPv4NoOptions | NetAdapterOffloadLayer3FlagIPv6NoExtensions,
        NetAdapterOffloadLayer4FlagTcpNoOptions,
        MyEvtAdapterOffloadSetRsc);
    rscOffloadCapabilities.TcpTimestampOption = FALSE;

    // Set the current RSC offload capabilities and register the callback for future changes in active capabilities
    NetAdapterOffloadSetRscCapabilities(NetAdapter, &rscOffloadCapabilities);
}

Updating RSC hardware offloads

If the TCP/IP stack or an overlying protocol driver requests a change to the net adapter's active RSC capabilities, NetAdapterCx invokes the client driver's EVT_NET_ADAPTER_OFFLOAD_SET_RSC callback that was registered in NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES. In this callback, the system supplies updated capabilities in the NETOFFLOAD object which the client driver can query to update its offload capabilities.

Client drivers can call the following functions to determine which RSC offloads are enabled:

The following example shows how a client driver might update its RSC offload capabilities:

VOID
MyEvtAdapterOffloadSetRsc(
    NETADAPTER NetAdapter,
    NETOFFLOAD Offload
)
{
    PMY_NET_ADAPTER_CONTEXT adapterContext = NetvAdapterGetContext(NetAdapter);

    // Store the updated information in the context
    adapterContext->IsRscIPv4Enabled = NetOffloadIsTcpRscIPv4Enabled(Offload);
    adapterContext->IsRscIPv6Enabled = NetOffloadIsTcpRscIPv6Enabled(Offload);
    adapterContext->IsRscTcpTimestampOptionEnabled = NetOffloadIsRscTcpTimestampOptionEnabled(Offload);
}

UDP RSC Offload (URO)

URO enables the coalescing of received UDP segments. NICs can combine UDP datagrams from the same flow that match a set of rules into a logically contiguous buffer. These combined datagrams are then indicated to the Windows networking stack as a single large packet. For information on URO rules, see Rules for coalescing UDP packets .

The URO keyword specified in INF keyword for controlling URO can be used to enable/disable URO with a registry key setting.

NetAdapterCx client drivers can use the existing RSC structures and RSC API for URO. To configure URO, client drivers must set the Layer4Flags field in the NET_ADAPTER_OFFLOAD_RSC_CAPABILITIES structure to NetAdapterOffloadLayer4FlagUdp.

URO behavior mirrors RSC with one exception. When the EVT_NET_ADAPTER_OFFLOAD_SET_RSC callback disables URO, the driver must indicate existing coalesced segments and wait until all outstanding URO indications are completed. This approach ensures that there are no URO indications active once the callback returns.

Jaa