Prepare a production environment for upgrade

Use the following procedures to prepare for System Center - Service Manager upgrade by creating a production environment and preparing it for production data for the purpose of upgrade testing.

Install an additional management server

The following procedure shows how to install an additional management server. You must deploy the initial Service Manager management server and Service Manager Database before deploying an additional management server.

Tip

You must be a member of the Service Manager Administrators user role in order to install an additional Service Manager management server.

When you install a secondary management server, data retention settings are reset. Before you install a secondary management server, make a note of the data retention settings. After you've installed the additional management server, adjust the data retention settings to their original values.

Run setup

Follow these steps to run setup:

1. By using an account that has administrator rights and that is also a member of the Service Manager Management group administrators, sign in to the computer that will host the additional Service Manager Management server.

2. On the System Center - Service Manager installation media, double-click Setup.exe.

3. On the Microsoft System Center <version> Service Manager page, select Install a Service Manager Management server.

4. On the Product registration page, enter the information in the boxes. In the Product key boxes, enter the product key you received with Service Manager, or alternatively, select Install as an evaluation edition (180 day trial)?. Read the Microsoft Software License Terms, and, if applicable, select I have read, understood, and agree with the terms of the license agreement, and select Next.

5. On the Installation location page, verify that sufficient free disk space is available, and select Next. If necessary, select Browse to change the location where the additional Service Manager Management server will be installed.

6. On the System check results page, ensure that the prerequisite check passed or at least passed with warnings, and select Next.

   • If the prerequisite checker determines that the Microsoft Report Viewer Redistributable hasn't been installed, select Install Microsoft Report Viewer Redistributable. After the Microsoft Report Viewer Redistributable 2008 (KB971119) Setup wizard completes, select Check perquisites again.

7. On the Configure the Service Manager Database page, in the Database server box, enter the name of the computer that hosts the Service Manager database that you used for your initial Service Manager Management server, and then press TAB. When the name of the instance displays in the SQL Server instance box, select Use an existing database. For example, enter Computer 2 in the Database server box.

8. Select the Database list, select the database name for the Service Manager database (the default name is ServiceManager), and select Next.

9. On the Configure the Service Manager Management group page, verify that the management group name and management group administrators boxes have been populated. Select Next.

10. On the Configure the Account for Service Manager Services page, select Domain account, specify the user name, password, and domain for the account, and select Test Credentials. After you receive a The credentials were accepted message, select Next. For example, enter the account information for the domain user SM_Acct, and select Next.

    Note

    The user name and password you provide here must be the same ones used for the Service Manager account on the data warehouse management server.

11. On the Diagnostic and usage data page, indicate your preference for sharing your Service Manager diagnostic and usage data with Microsoft. As an option, select Privacy statement for System Center Service Manager, and select Next.

12. On the Use Microsoft Update to help keep your computer secure and up-to-date page, indicate your preference for using Microsoft Update to check for Service Manager updates, and select Next.

13. On the Installation summary page, select Install.

14. On the Setup completed successfully page, we recommend that you leave Open the Encryption Backup or Restore Wizard selected, and select Close.

Copy customized workflow assembly files

Use the following procedure to copy the workflow assembly files from the Service Manager Installation folder on the primary management server to the secondary management server that you created in the previous procedure.

Copy the workflow assembly files

Follow these steps to copy the workflow assembly files:

1. On the computer that is running the Service Manager Primary Server role, browse to the Service Manager Installation folder for example, C:\Program Files\Microsoft System Center\Service Manager copy the workflow files (workflow.dll).

2. On the computer that is running the Service Manager Secondary server; browse to the Service Manager Installation folder; for example, C:\Program Files\Microsoft System Center\Service Manager. Paste the copied workflow files into this folder. You should overwrite any existing files.

   Note

   You must place the workflow assembly files in the Service Manager installation folder. This is very important step if you want to test the custom workflows that depend on workflow assembly files. Failure to copy these files would lead to failed custom workflows in the lab environment.

Disable Service Manager connectors in the production environment

Use the following procedure to disable the Service Manager connectors in the production environment:

1. In the Service Manager console, select Administration.
2. In the Administration pane, expand Administration, and select Connectors.
3. In the Connectors pane, select the connector that you want to disable.
4. In the Tasks pane, under the connector name, select Disable.
5. In the Disable Connector dialog, select OK.

Disable email notifications in the production environment

Use the following procedure to disable incoming and outbound email notifications in the production environment:

Disable outbound email notifications

Follow these steps to disable outbound email notifications:

1. In the Service Manager console, select Administration.
2. In the Administration pane, expand Notifications, and select Channels.
3. In the Channels pane, select E-Mail Notification Channel.
4. In the Tasks pane, under E-Mail Notification Channel, select Properties to open the Configure E-Mail Notification Channel dialog.
5. Clear the Enable e-mail notifications checkbox.

Disable incoming email notifications

Follow these steps to disable incoming email notifications:

1. In the Service Manager console, select Administration.
2. In the Administration pane, expand Administration, and select Settings.
3. In the Settings pane, double-click Incident Settings.
4. In the Incident Settings dialog, select Incoming E-mail.
5. Clear Turn on incoming e-mails processing, and select OK.

Stop Service Manager services on the secondary management server

Use the following procedure to stop the Service Manager services:

Stop the Service Manager services

Follow these steps to stop the Service Manager services:

1. In the Run dialog, in the Open text field, enter services.msc, and select OK.
2. In the Services window, in the Services (Local) pane, locate the following three services and for each one, and select Stop:
   1. System Center Data Access Service
   2. System Center Management
   3. System Center Management Configuration
3. Open Windows Explorer.
4. Locate the folder \Program Files\Microsoft System Center\Service Manager.
5. Delete the Health Service State folder and all of its contents.

Back up the production Service Manager database for future recovery

Use the following procedure to back up the production Service Manager database in Microsoft SQL Server:

Back up the Service Manager database

Follow these steps to back up the Service Manager database:

1. After connecting to the appropriate instance of the Microsoft SQL Server Database Engine, in Object Explorer, select the server name to expand the server tree.

2. Expand Databases, and depending on the database, either select a user database or expand System Databases and select a system database.

3. Right-click the database, point to Tasks, and select Back Up. The Back Up Database dialog appears.

4. In the Database list box, verify the database name. You can optionally select a different database from the list.

5. You can perform a database backup for any recovery model (FULL, BULK_LOGGED, or SIMPLE).

6. In the Backup type list box, select Full.

   Note

   After creating a full database backup, you can create a differential database backup. For more information, see How to: Create a Differential Database Backup (SQL Server Management Studio).

7. Optionally, you can select Copy Only Backup to create a copy-only backup. A copy-only backup is a SQL Server backup that is independent of the sequence of conventional SQL Server backups. For more information, see Copy-Only Backups.

   Note

   When the Differential option is selected, you can't create a copy-only backup.

8. For Backup component, select Database.

9. Either accept the default backup set name suggested in the Name text box, or enter a different name for the backup set.

10. Optionally, in the Description text box, enter a description of the backup set.

11. Specify when the backup set will expire and can be overwritten without explicitly skipping verification of the expiration data.

    Note

    For more information about backup expiration dates, see BACKUP (Transact-SQL).

12. Choose the type of backup destination by selecting Disk or Tape. To select the paths of up to 64 disk or tape drives containing a single media set, select Add. The selected paths are displayed in the Backup to list box.

13. To view or select the advanced options, select Options in the Select a page pane.

14. Select an Overwrite Media option, by selecting either Back up to the existing media set or Back up to a new media set, and erase all existing backup sets.

15. In the Reliability section, select either Verify backup when finished or Perform checksum before writing to media, and then optionally select Continue on checksum error. For more information, see Detecting and Coping with Media Errors During Backup and Restore

Enable Service Manager connectors in the production environment

Use the following procedure to enable the Service Manager connectors in the production environment:

Enable a connector

Follow these steps to enable a connector:

1. In the Service Manager console, select Administration.
2. In the Administration pane, expand Administration, and select Connectors.
3. In the Connectors pane, select the connector that you want to enable.
4. In the Tasks pane, under the connector name, select Enable.

Enable email notifications in the production environment

Use the following procedure to enable incoming and outbound email notifications in the production environment:

Enable outbound email notifications

Follow these steps to enable outbound email notifications:

1. In the Service Manager console, select Administration.
2. In the Administration pane, expand Notifications, and select Channels.
3. In the Channels pane, select E-Mail Notification Channel.
4. In the Tasks pane, under E-Mail Notification Channel, select Properties to open the Configure E-Mail Notification Channel dialog.
5. Select Enable e-mail notifications.

Enable incoming email notifications

Follow these steps to enable incoming email notifications:

1. In the Service Manager console, select Administration.
2. In the Administration pane, expand Administration, and select Settings.
3. In the Settings pane, double-click Incident Settings.
4. In the Incident Settings dialog, select Incoming E-mail.
5. Select Turn on incoming e-mails processing, and select OK.

Next steps

Prepare the lab environment