Jaa

Ktpass

  • Artikkeli

 

Applies To: Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows 8

Configures the server principal name for the host or service in Active Directory Domain Services (AD DS) and generates a .keytab file that contains the shared secret key of the service. The .keytab file is based on the Massachusetts Institute of Technology (MIT) implementation of the Kerberos authentication protocol. The Ktpass command-line tool allows non-Windows services that support Kerberos authentication to use the interoperability features provided by the Kerberos Key Distribution Center (KDC) service. This topic applies to the operating system versions designated in the Applies To list at the beginning of the topic.

For examples of how this command can be used, see Examples.

Syntax

ktpass
[/out <FileName>] 
[/princ <PrincipalName>] 
[/mapuser <UserAccount>] 
[/mapop {add|set}] [{-|+}desonly] [/in <FileName>]
[/pass {Password|*|{-|+}rndpass}]
[/minpass]
[/maxpass]
[/crypto {DES-CBC-CRC|DES-CBC-MD5|RC4-HMAC-NT|AES256-SHA1|AES128-SHA1|All}]
[/itercount]
[/ptype {KRB5_NT_PRINCIPAL|KRB5_NT_SRV_INST|KRB5_NT_SRV_HST}]
[/kvno <KeyVersionNum>]
[/answer {-|+}]
[/target]
[/rawsalt] [{-|+}dumpsalt] [{-|+}setupn] [{-|+}setpass <Password>]  [/?|/h|/help]

Parameters

Parameter

Description

/out <FileName>

Specifies the name of the Kerberos version 5 .keytab file to generate.

Note

This is the .keytab file that you transfer to a computer that is not running the Windows operating system, and then replace or merge with your existing .keytab file, /Etc/Krb5.keytab.

/princ <PrincipalName>

Specifies the principal name in the form host/computer.contoso.com@CONTOSO.COM.

Warning

This parameter is case sensitive. See Remarks for more information.

/mapuser <UserAccount>

Maps the name of the Kerberos principal, which is specified by the princ parameter, to the specified domain account.

/mapop {add|set}

Specifies how the mapping attribute is set.

  • Add adds the value of the specified local user name. This is the default.

  • Set sets the value for Data Encryption Standard (DES)-only encryption for the specified local user name.

{-|+}desonly

DES-only encryption is set by default.

  • + Sets an account for DES-only encryption.

  • - Releases restriction on an account for DES-only encryption.

Important

Beginning with Windows 7 and Windows Server 2008 R2, Windows does not support DES by default.

/in <FileName>

Specifies the .keytab file to read from a host computer that is not running the Windows operating system.

/pass {Password|*|{-|+}rndpass}

Specifies a password for the principal user name that is specified by the princ parameter. Use "*" to prompt for a password.

/minpass

Sets the minimum length of the random password to 15 characters.

/maxpass

Sets the maximum length of the random password to 256 characters.

/crypto {DES-CBC-CRC|DES-CBC-MD5|RC4-HMAC-NT|AES256-SHA1|AES128-SHA1|All}

Specifies the keys that are generated in the keytab file:

  • DES-CBC-CRC is used for compatibility.

  • DES-CBC-MD5 adheres more closely to the MIT implementation and is used for compatibility.

  • RC4-HMAC-NT employs 128-bit encryption.

  • AES256-SHA1 employs AES256-CTS-HMAC-SHA1-96 encryption.

  • AES128-SHA1 employs AES128-CTS-HMAC-SHA1-96 encryption.

  • All states that all supported cryptographic types can be used.

Note

The default settings are based on older MIT versions. Therefore, /crypto should always be specified.

/itercount

Specifies the iteration count that is used for AES encryption. The default is that itercount is ignored for non-AES encryption and set at 4,096 for AES encryption.

/ptype {KRB5_NT_PRINCIPAL|KRB5_NT_SRV_INST|KRB5_NT_SRV_HST}

Specifies the principal type.

  • KRB5_NT_PRINCIPAL is the general principal type (recommended).

  • KRB5_NT_SRV_INST is the user service instance.

  • KRB5_NT_SRV_HST is the host service instance.

/kvno <KeyVersionNum>

Specifies the key version number. The default value is 1.

/answer {-|+}

Sets the background answer mode:

- Answers reset password prompts automatically with NO.

+ Answers reset password prompts automatically with YES.

/target

Sets which domain controller to use. The default is for the domain controller to be detected, based on the principal name. If the domain controller name does not resolve, a dialog box will prompt for a valid domain controller.

/rawsalt

Forces Ktpass to use the rawsalt algorithm when generating the key. This parameter is not needed.

{-|+}dumpsalt

The output of this parameter shows the MIT salt algorithm that is being used to generate the key.

{-|+}setupn

Sets the user principal name (UPN) in addition to the service principal name (SPN). The default is to set both in the .keytab file.

{-|+}setpass <Password>

Sets the user's password when supplied. If rndpass is used, a random password is generated instead.

/?|/h|/help

Displays command-line Help for Ktpass.

Remarks

Services running on systems that are not running the Windows operating system can be configured with service instance accounts in Active Directory Domain Services. This allows any Kerberos client to authenticate to services that are not running the Windows operating system by using Windows KDCs.

The /princ parameter is not evaluated by Ktpass and is used as provided. There is no check to see if the parameter matches the exact case of the userPrincipalName attribute value when generating the Keytab file. Case sensitive Kerberos distributions using this Keytab file might have problems when there is no exact case match and could fail during pre-authentication. Check and retrieve the correct userPrincipalName attribute value from a LDIFDE export file. For example:

ldifde /f keytab_user.ldf /d "CN=Keytab User,OU=UserAccounts,DC=contoso,DC=corp,DC=microsoft,DC=com" /p base /l samaccountname,userprincipalname

Examples

The following example illustrates how to create a Kerberos .keytab file, machine.keytab, in the current directory for the user Sample1. (You will merge this file with the Krb5.keytab file on a host computer that is not running the Windows operating system.) The Kerberos .keytab file will be created for all supported encryption types for the general principal type.

To generate a .keytab file for a host computer that is not running the Windows operating system, use the following steps to map the principal to the account and set the host principal password:

  1. Use the Active Directory User and Computers snap-in to create a user account for a service on a computer that is not running the Windows operating system. For example, create an account with the name Sample1.

  2. Use Ktpass to set up an identity mapping for the user account by typing the following at a command prompt:

    ktpass /princ host/Sample1.contoso.com@CONTOSO.COM /mapuser Sample1 /pass MyPas$w0rd /out Sample1.keytab /crypto all /ptype KRB5_NT_PRINCIPAL /mapop set

    Note

    You cannot map multiple service instances to the same user account.

  3. Merge the .keytab file with the /Etc/Krb5.keytab file on a host computer that is not running the Windows operating system.

Additional references

Command-Line Syntax Key