Jaa

Event ID 24608 — BitLocker Startup

  • Artikkeli

Applies To: Windows Server 2008

When a computer protected with BitLocker Drive Encryption is restarted, the early startup components perform a series of integrity checks and, if the system passes, attempts to retrieve the needed key information to unlock any BitLocker-protected volumes. Success depends on the availability of configured key protectors, such as the TPM or a user-supplied PIN, and the existence of volume metadata stored within the encrypted drive.

If Windows cannot unlock the Windows operating system volume, BitLocker enters recovery mode. If the user can supply a recovery password or insert a USB flash drive with a recovery key, BitLocker will unlock the volume.

After the Windows operating system volume has been successfully unlocked, BitLocker uses encrypted information stored in the volume metadata and Windows registry to unlock any data volumes configured for automatic unlocking.

Event Details

Product: Windows Operating System
ID: 24608
Source: Microsoft-Windows-BitLocker-Driver
Version: 6.0
Symbolic Name: FVE_KEYRING_UNEXPECTED
Message: An unexpected error was encountered attempting to retrieve the volume master key during restart.

Resolve

Disable and re-enable BitLocker to repair keying information

BitLocker entered recovery, and a user has successfully completed the recovery process by using a recovery key (stored on a USB flash drive) or a recovery password (entered manually at the recovery screen). The most recent recovery session happened because the BitLocker key needed to authenticate and unlock the volume could not be retrieved or was corrupted.

Although data corruptions can occur, they are rare. This is most likely a hardware error. First, disable and re-enable BitLocker. This will recreate the keying material. If BitLocker continues to enter recovery for the same reason, you need to repair or replace hardware components.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To disable and re-enable BitLocker:

  1. Click Start, and then click Control Panel.
  2. Click Security.
  3. Click BitLocker Drive Encryption.
  4. If the User Account Control dialog box appears, verify the proposed action is correct, and then click Continue.
  5. Click Turn off BitLocker.
  6. Click Disable BitLocker.
  7. In the BitLocker Drive Encryption window, click Turn On BitLocker.
  8. Close the BitLocker Drive Encryption window.

Verify

To verify that BitLocker has started successfully:

  1. If the computer is not running, start the computer.
  2. If BitLocker has been configured to use a USB flash drive, insert the USB flash drive. If BitLocker has been configured to use a PIN, enter your PIN when prompted.
  3. Verify that Windows Welcome Screen, Logon Screen or Desktop appears. This indicates that BitLocker has correctly unlocked the Windows operating system volume.
  4. Log on to Windows and access any data volumes that are encrypted with BitLocker.

Note: Data volumes can be configured to be automatically unlocked or to require manual unlocking.

BitLocker Startup

Core Security