Remove-CsOnlineLisWirelessAccessPoint
Removes a Location Information Server (LIS) wireless access point (WAP).
Syntax
Remove-CsOnlineLisWirelessAccessPoint
[-BSSID] <string>
[-Force]
[-IsDebug <bool>]
[-NCSApiUrl <string>]
[-TargetStore <string>]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Enhanced 9-1-1 allows an emergency operator to identify the location of a caller without having to ask the caller for that information. In the case where a caller is calling from a Voice over Internet Protocol (VoIP) connection, that information must be extracted based on various connection factors. The VoIP administrator must configure a location map (called a wiremap) that will determine a caller's location. This cmdlet removes a WAP from the location configuration database. Removing the WAP will not remove the location associated with that WAP. Use the `Remove-CsLisOnlineLocation` cmdlet to remove a location.
The BSSID (Basic Service Set Identifiers) is used to describe sections of a wireless local area network. It is the MAC of the 802.11 side of the access point. The BSSID parameter in this command also supports the wildcard format to cover all BSSIDs in a range which are sharing the same description and Location ID. The wildcard '*' can be on either the last one or two character(s).
If a BSSID with wildcard format is already exists, the request for removing a single BSSID which is within this wildcard range and with the same location ID will not be accepted.
Examples
Example 1
Remove-CsOnlineLisWirelessAccessPoint -BSSID F0-6E-0B-C2-03-23Example 1 removes the Location Information Server (LIS) wireless access point with BSS ID "F0-6E-0B-C2-03-23".
Example 2
Remove-CsOnlineLisWirelessAccessPoint -BSSID F0-6E-0B-C2-04-*Example 2 removes the Location Information Server (LIS) wireless access point with BSS ID "F0-6E-0B-C2-04-*".
Parameters
-BSSID
The Basic Service Set Identifier (BSSID) of the wireless access point. This value must be in the form nn-nn-nn-nn-nn-nn, such as 12-34-56-78-90-ab. It can be presented in wildcard format. The wildcard '*' can be on either the last one or two character(s).
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-Force
The Force switch specifies whether to suppress warning and confirmation messages. It can be useful in scripting to suppress interactive prompts. If the Force switch isn't provided in the command, you're prompted for administrative input if required.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-IsDebug
This parameter is reserved for internal Microsoft use.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-NCSApiUrl
This parameter is reserved for internal Microsoft use.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-TargetStore
This parameter is reserved for internal Microsoft use.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
Inputs
System.String
Outputs
System.Object