ForEach-Object

Reference

Module:: Microsoft.PowerShell.Core

Performs an operation against each item in a collection of input objects.

Syntax

ForEach-Object
            [-InputObject <PSObject>]
            [-Begin <ScriptBlock>]
            [-Process] <ScriptBlock[]>
            [-End <ScriptBlock>]
            [-RemainingScripts <ScriptBlock[]>]
            [-WhatIf]
            [-Confirm]
            [<CommonParameters>]

ForEach-Object
            [-InputObject <PSObject>]
            [-MemberName] <String>
            [-ArgumentList <Object[]>]
            [-WhatIf]
            [-Confirm]
            [<CommonParameters>]

Description

The ForEach-Object cmdlet performs an operation on each item in a collection of input objects. The input objects can be piped to the cmdlet or specified using the InputObject parameter.

Starting in Windows PowerShell 3.0, there are two different ways to construct a ForEach-Object command.

Script block. You can use a script block to specify the operation. Within the script block, use the $_ variable to represent the current object. The script block is the value of the Process parameter. The script block can contain any PowerShell script.

For example, the following command gets the value of the ProcessName property of each process on the computer.

Get-Process | ForEach-Object {$_.ProcessName}

ForEach-Object supports the begin, process, and end blocks as described in about_functions.

Note

The script blocks run in the caller's scope. Therefore, the blocks have access to variables in that scope and can create new variables that persist in that scope after the cmdlet completes.
Operation statement. You can also write an operation statement, which is much more like natural language. You can use the operation statement to specify a property value or call a method. Operation statements were introduced in Windows PowerShell 3.0.

For example, the following command also gets the value of the ProcessName property of each process on the computer.

Get-Process | ForEach-Object ProcessName

Examples

Example 1: Divide integers in an array

This example takes an array of three integers and divides each one of them by 1024.

30000, 56798, 12432 | ForEach-Object -Process {$_/1024}

29.296875
55.466796875
12.140625

Example 2: Get the length of all the files in a directory

This example processes the files and directories in the PowerShell installation directory $PSHOME.

Get-ChildItem $PSHOME |
  ForEach-Object -Process {if (!$_.PSIsContainer) {$_.Name; $_.Length / 1024; " " }}

If the object isn't a directory, the script block gets the name of the file, divides the value of its Length property by 1024, and adds a space (" ") to separate it from the next entry. The cmdlet uses the PSISContainer property to determine whether an object is a directory.

Example 3: Operate on the most recent System events

This example writes the 1000 most recent events from the System event log to a text file. The current time is displayed before and after processing the events.

Get-EventLog -LogName System -Newest 1000 |
    ForEach-Object -Begin {Get-Date} -Process {
        Out-File -FilePath Events.txt -Append -InputObject $_.Message
    } -End {Get-Date}

Get-EventLog gets the 1000 most recent events from the System event log and pipes them to the ForEach-Object cmdlet. The Begin parameter displays the current date and time. Next, the Process parameter uses the Out-File cmdlet to create a text file that's named events.txt and stores the message property of each of the events in that file. Last, the End parameter is used to display the date and time after all the processing has completed.

Example 4: Change the value of a Registry key

This example changes the value of the RemotePath registry entry in all the subkeys under the HKCU:\Network key to uppercase text.

Get-ItemProperty -Path HKCU:\Network\* |
  ForEach-Object {
    Set-ItemProperty -Path $_.PSPath -Name RemotePath -Value $_.RemotePath.ToUpper()
  }

You can use this format to change the form or content of a registry entry value.

Each subkey in the Network key represents a mapped network drive that reconnects at sign on. The RemotePath entry contains the UNC path of the connected drive. For example, if you map the E: drive to \\Server\Share, an E subkey is created in HKCU:\Network with the RemotePath registry value set to \\Server\Share.

The command uses the Get-ItemProperty cmdlet to get all the subkeys of the Network key and the Set-ItemProperty cmdlet to change the value of the RemotePath registry entry in each key. In the Set-ItemProperty command, the path is the value of the PSPath property of the registry key. This is a property of the Microsoft .NET Framework object that represents the registry key, not a registry entry. The command uses the ToUpper() method of the RemotePath value, which is a string REG_SZ.

Because Set-ItemProperty is changing the property of each key, the ForEach-Object cmdlet is required to access the property.

Example 5: Use the $null automatic variable

This example shows the effect of piping the $null automatic variable to the ForEach-Object cmdlet.

1, 2, $null, 4 | ForEach-Object {"Hello"}

Hello
Hello
Hello
Hello

Because PowerShell treats $null as an explicit placeholder, the ForEach-Object cmdlet generates a value for $null as it does for other objects piped to it.

Example 6: Get property values

This example gets the value of the Path property of all installed PowerShell modules using the MemberName parameter of the ForEach-Object cmdlet.

Get-Module -ListAvailable | ForEach-Object -MemberName Path
Get-Module -ListAvailable | Foreach Path

The second command is equivalent to the first. It uses the Foreach alias of the ForEach-Object cmdlet and omits the name of the MemberName parameter, which is optional.

The ForEach-Object cmdlet is useful for getting property values, because it gets the value without changing the type, unlike the Format cmdlets or the Select-Object cmdlet, which change the property value type.

Example 7: Split module names into component names

This example shows three ways to split two dot-separated module names into their component names. The commands call the Split method of strings. The three commands use different syntax, but they are equivalent and interchangeable. The output is the same for all three cases.

"Microsoft.PowerShell.Core", "Microsoft.PowerShell.Host" |
    ForEach-Object {$_.Split(".")}
"Microsoft.PowerShell.Core", "Microsoft.PowerShell.Host" |
    ForEach-Object -MemberName Split -ArgumentList "."
"Microsoft.PowerShell.Core", "Microsoft.PowerShell.Host" |
    Foreach Split "."

Microsoft
PowerShell
Core
Microsoft
PowerShell
Host

The first command uses the traditional syntax, which includes a script block and the current object operator $_. It uses the dot syntax to specify the method and parentheses to enclose the delimiter argument.

The second command uses the MemberName parameter to specify the Split method and the ArgumentList parameter to identify the dot (.) as the split delimiter.

The third command uses the Foreach alias of the ForEach-Object cmdlet and omits the names of the MemberName and ArgumentList parameters, which are optional.

Example 8: Using ForEach-Object with two script blocks

In this example, we pass two script blocks positionally. All the script blocks bind to the Process parameter. However, they're treated as if they had been passed to the Begin and Process parameters.

1..2 | ForEach-Object { 'begin' } { 'process' }

begin
process
process

Example 9: Using ForEach-Object with more than two script blocks

In this example, we pass four script blocks positionally. All the script blocks bind to the Process parameter. However, they're treated as if they had been passed to the Begin, Process, and End parameters.

1..2 | ForEach-Object { 'begin' } { 'process A' }  { 'process B' }  { 'end' }

begin
process A
process B
process A
process B
end

Note

The first script block is always mapped to the begin block, the last block is mapped to the end block, and the two middle blocks are mapped to the process block.

Example 10: Run multiple script blocks for each pipeline item

As shown in the previous example, multiple script blocks passed using the Process parameter get mapped to the Begin and End parameters. To avoid this mapping, you must provide explicit values for the Begin and End parameters.

1..2 | ForEach-Object -Begin $null -Process { 'one' }, { 'two' }, { 'three' } -End $null

one
two
three
one
two
three

Parameters

-ArgumentList

Specifies an array of arguments to a method call. For more information about the behavior of ArgumentList, see about_Splatting.

This parameter was introduced in Windows PowerShell 3.0.

Type:	Object[]
Aliases:	Args
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Begin

Specifies a script block that runs before this cmdlet processes any input objects. This script block is only run once for the entire pipeline. For more information about the begin block, see about_Functions.

Type:	ScriptBlock
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-End

Specifies a script block that runs after this cmdlet processes all input objects. This script block is only run once for the entire pipeline. For more information about the end block, see about_Functions.

Type:	ScriptBlock
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-InputObject

Specifies the input objects. ForEach-Object runs the script block or operation statement on each input object. Enter a variable that contains the objects, or type a command or expression that gets the objects.

When you use the InputObject parameter with ForEach-Object, instead of piping command results to ForEach-Object, the InputObject value is treated as a single object. This is true even if the value is a collection that's the result of a command, such as -InputObject (Get-Process). Because InputObject can't return individual properties from an array or collection of objects, we recommend that if you use ForEach-Object to perform operations on a collection of objects for those objects that have specific values in defined properties, you use ForEach-Object in the pipeline, as shown in the examples in this topic.

Type:	PSObject
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-MemberName

Specifies the name of the member property to get or the member method to call. The members must be instance members, not static members.

Wildcard characters are permitted, but work only if the resulting string resolves to a unique value. For example, if you run Get-Process | ForEach -MemberName *Name, the wildcard pattern matches more than one member causing the command to fail.

This parameter was introduced in Windows PowerShell 3.0.

Type:	String
Position:	0
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	True

-Process

Specifies the operation that's performed on each input object. This script block is run for every object in the pipeline. For more information about the process block, see about_Functions.

When you provide multiple script blocks to the Process parameter, the first script block is always mapped to the begin block. If there are only two script blocks, the second block is mapped to the process block. If there are three or more script blocks, first script block is always mapped to the begin block, the last block is mapped to the end block, and the middle blocks are mapped to the process block.

Type:	ScriptBlock[]
Position:	0
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-RemainingScripts

Specifies all script blocks that aren't taken by the Process parameter.

This parameter was introduced in Windows PowerShell 3.0.

Type:	ScriptBlock[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet isn't run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Inputs

PSObject

You can pipe any object to this cmdlet.

Outputs

PSObject

This cmdlet returns objects that are determined by the input.

Notes

Windows PowerShell includes the following aliases for ForEach-Object:

%
foreach

The ForEach-Object cmdlet works much like the Foreach statement, except that you cannot pipe input to a Foreach statement. For more information about the Foreach statement, see about_Foreach.

Starting in PowerShell 4.0, Where and ForEach methods were added for use with collections. You can read more about these new methods here about_arrays

Jaa

ForEach-Object

Syntax

Description

Examples

Example 1: Divide integers in an array

Example 2: Get the length of all the files in a directory

Example 3: Operate on the most recent System events

Example 4: Change the value of a Registry key

Example 5: Use the $null automatic variable

Example 6: Get property values

Example 7: Split module names into component names

Example 8: Using ForEach-Object with two script blocks

Example 9: Using ForEach-Object with more than two script blocks

Example 10: Run multiple script blocks for each pipeline item

Parameters

-ArgumentList

-Begin

-Confirm

-End

-InputObject

-MemberName

-Process

-RemainingScripts

-WhatIf

Inputs

Outputs

Notes

Lisäresursseja

Jaa

ForEach-Object

Syntax

Description

Examples

Example 1: Divide integers in an array

Example 2: Get the length of all the files in a directory

Example 3: Operate on the most recent System events

Example 4: Change the value of a Registry key

Example 5: Use the $null automatic variable

Example 6: Get property values

Example 7: Split module names into component names

Example 8: Using ForEach-Object with two script blocks

Example 9: Using ForEach-Object with more than two script blocks

Example 10: Run multiple script blocks for each pipeline item

Parameters

-ArgumentList

-Begin

-Confirm

-End

-InputObject

-MemberName

-Process

-RemainingScripts

-WhatIf

Inputs

Outputs

Notes

Related Links

Lisäresursseja