about_Transactions

Artikkeli
09/03/2024

Short description

Describes how to manage transacted operations in PowerShell.

Long description

Transactions are supported in PowerShell beginning in PowerShell 2.0. This feature enables you to start a transaction, to indicate which commands are part of the transaction, and to commit or roll back a transaction.

In PowerShell, a transaction is a set of one or more commands that are managed as a logical unit. A transaction can be completed ("committed"), which changes data affected by the transaction. Or, a transaction can be completely undone ("rolled back") so that the affected data isn't changed by the transaction.

Because the commands in a transaction are managed as a unit, either all commands are committed, or all commands are rolled back.

Transactions are widely used in data processing, most notably in database operations and for financial transactions. Transactions are most often used when the worst-case scenario for a set of commands isn't that they all fail, but that some commands succeed while others fail, leaving the system in a damaged, false, or uninterpretable state that's difficult to repair.

Transaction cmdlets

PowerShell includes several cmdlets designed for managing transactions.

Start-Transaction: Starts a new transaction.
Use-Transaction: Adds a command or expression to the transaction. The command must use transaction-enabled objects.
Undo-Transaction: Rolls back the transaction so that no data is changed by the transaction.
Complete-Transaction: Commits the transaction. The data affected by the transaction is changed.
Get-Transaction: Gets information about the active transaction.

For a list of transaction cmdlets, type:

Get-Command *transaction

For detailed information about the cmdlets, type:

Get-Help Use-Transaction -Detailed

Transaction-enabled elements

To participate in a transaction, both the cmdlet and the provider must support transactions. This feature is built into the objects that are affected by the transaction.

The PowerShell Registry provider supports transactions in Windows. The TransactedString object works with any operating system that runs PowerShell.

Other PowerShell providers can support transactions. To find the PowerShell providers in your session that support transactions, use the following command to find the Transactions value in the Capabilities property of providers:

Get-PSProvider | Where-Object {$_.Capabilities -like "*transactions*"}

For more information about a provider, see the Help for the provider. To get provider help, type:

Get-Help <provider-name>

For example, to get Help for the Registry provider, type:

Get-Help registry

The UseTransaction parameter

Cmdlets that can support transactions have a UseTransaction parameter. This parameter includes the command in the active transaction. You can use the full parameter name or its alias, usetx.

The parameter can be used only when the session contains an active transaction. If you enter a command with the UseTransaction parameter when there is no active transaction, the command fails.

To find cmdlets with the UseTransaction parameter, type:

Get-Help * -Parameter UseTransaction

In PowerShell core, all the cmdlets designed to work with PowerShell providers support transactions. As a result, you can use the provider cmdlets to manage transactions.

For more information about PowerShell providers, see about_Providers.

The transaction object

Transactions are represented in PowerShell by a transaction object, System.Management.Automation.Transaction.

The object has the following properties:

RollbackPreference: Contains the rollback preference set for the current transaction. You can set the rollback preference when you use Start-Transaction to start the transaction.

The rollback preference determines the conditions under which the transaction is rolled back automatically. Valid values are Error, TerminatingError, and Never. The default value is Error.
Status: Contains the current status of the transaction. Valid values are Active, Committed, and RolledBack.
SubscriberCount: Contains the number of subscribers to the transaction. A subscriber is added to a transaction when you start a transaction while another transaction is in progress. The subscriber count is decremented when a subscriber commits the transaction.

Active transactions

In PowerShell, only one transaction is active at a time, and you can manage only the active transaction. Multiple transactions can be in progress in the same session at the same time, but only the most-recently started transaction is active.

As a result, you can't specify a particular transaction when using the transaction cmdlets. Commands always apply to the active transaction.

This is most evident in the behavior of the Get-Transaction cmdlet. When you enter a Get-Transaction command, Get-Transaction always gets only one transaction object. This object is the object that represents the active transaction.

To manage a different transaction, you must first finish the active transaction, either by committing it or rolling it back. When you do this, the previous transaction becomes active automatically. Transactions become active in the reverse of order of which they're started, so that the most recently started transaction is always active.

Subscribers and independent transactions

If you start a transaction while another transaction is in progress, by default, PowerShell doesn't start a new transaction. Instead, it adds a "subscriber" to the current transaction.

When a transaction has multiple subscribers, a single Undo-Transaction command at any point rolls back the entire transaction for all subscribers. However, to commit the transaction, you must enter a Complete-Transaction command for every subscriber.

To find the number of subscribers to a transaction, check the SubscriberCount property of the transaction object. For example, the following command uses the Get-Transaction cmdlet to get the value of the SubscriberCount property of the active transaction:

(Get-Transaction).SubscriberCount

Adding a subscriber is the default behavior because most transactions that are started while another transaction is in progress are related to the original transaction. In the typical model, a script that contains a transaction calls a helper script that contains its own transaction. Because the transactions are related, they should be rolled back or committed as a unit.

However, you can start a transaction that's independent of the current transaction by using the Independent parameter of the Start-Transaction cmdlet.

When you start an independent transaction, Start-Transaction creates a new transaction object, and the new transaction becomes the active transaction. The independent transaction can be committed or rolled back without affecting the original transaction.

When the independent transaction is finished (committed or rolled back), the original transaction becomes the active transaction again.

Changing data

When you use transactions to change data, the data that's affected by the transaction isn't changed until you commit the transaction. However, the same data can be changed by commands that aren't part of the transaction.

Keep this in mind when you are using transactions to manage shared data. Typically, databases have mechanisms that lock the data while you are working on it, preventing other users, and other commands, scripts, and functions, from changing it.

However, the lock is a feature of the database. It isn't related to transactions. If you are working in a transaction-enabled file system or other data store, the data can be changed while the transaction is in progress.

Examples

The examples in this section use the PowerShell Registry provider and assume that you are familiar with it. For information about the Registry provider, type Get-Help registry.

Example 1: Committing a transaction

To create a transaction, use the Start-Transaction cmdlet. The following command starts a transaction with the default settings.

Start-Transaction

To include commands in the transaction, use the UseTransaction parameter of the cmdlet. By default, commands aren't included in the transaction,

For example, the following command, which sets the current location in the Software key of the HKCU: drive, isn't included in the transaction.

cd hkcu:\Software

The following command, which creates the MyCompany key, uses the UseTransaction parameter of the New-Item cmdlet to include the command in the active transaction.

New-Item MyCompany -UseTransaction

The command returns an object that represents the new key, but because the command is part of the transaction, the registry isn't yet changed.

Hive: HKEY_CURRENT_USER\Software

SKC  VC Name                           Property
---  -- ----                           --------
  0   0 MyCompany                      {}

To commit the transaction, use the Complete-Transaction cmdlet. Because it always affects the active transaction, you can't specify the transaction.

Complete-Transaction

As a result, the MyCompany key is added to the registry.

dir m*

Hive: HKEY_CURRENT_USER\software

SKC  VC Name                           Property
---  -- ----                           --------
 83   1 Microsoft                      {(default)}
  0   0 MyCompany                      {}

Example 2: Rolling back a transaction

To create a transaction, use the Start-Transaction cmdlet. The following command starts a transaction with the default settings.

Start-Transaction

The following command, which creates the MyOtherCompany key, uses the UseTransaction parameter of the New-Item cmdlet to include the command in the active transaction.

New-Item MyOtherCompany -UseTransaction

The command returns an object that represents the new key, but because the command is part of the transaction, the registry isn't yet changed.

Hive: HKEY_CURRENT_USER\Software

SKC  VC Name                           Property
---  -- ----                           --------
  0   0 MyOtherCompany                 {}

To roll back the transaction, use the Undo-Transaction cmdlet. Because it always affects the active transaction, you don't specify the transaction.

Undo-Transaction

The result is that the MyOtherCompany key isn't added to the registry.

dir m*

Hive: HKEY_CURRENT_USER\software

SKC  VC Name                           Property
---  -- ----                           --------
 83   1 Microsoft                      {(default)}
  0   0 MyCompany                      {}

Example 3: Previewing a transaction

Typically, the commands used in a transaction change data. However, the commands that get data are useful in a transaction, too, because they get data inside of the transaction. This provides a preview of the changes that committing the transaction would cause.

The following example shows how to use the Get-ChildItem command (the alias is dir) to preview the changes in a transaction.

The following command starts a transaction.

Start-Transaction

The following command uses the New-ItemProperty cmdlet to add the MyKey registry entry to the MyCompany key. The command uses the UseTransaction parameter to include the command in the transaction.

New-Itemproperty -path MyCompany -Name MyKey -value 123 -UseTransaction

The command returns an object representing the new registry entry, but the registry entry isn't changed.

MyKey
-----
123

To get the items that are currently in the registry, use a Get-ChildItem command (dir) without the UseTransaction parameter. The following command gets items that begin with "M."

dir m*

The result shows that no entries have yet been added to the MyCompany key.

Hive: HKEY_CURRENT_USER\Software

SKC  VC Name                           Property
---  -- ----                           --------
 83   1 Microsoft                      {(default)}
  0   0 MyCompany                      {}

To preview the effect of committing the transaction, enter a Get-ChildItem (dir) command with the UseTransaction parameter. This command has a view of the data from within the transaction.

dir m* -useTransaction

The result shows that, if the transaction is committed, the MyKey entry is added to the MyCompany key.

Hive: HKEY_CURRENT_USER\Software

SKC  VC Name                           Property
---  -- ----                           --------
 83   1 Microsoft                      {(default)}
  0   1 MyCompany                      {MyKey}

Example 4: Combining transacted and non-transacted commands

You can enter non-transacted commands during a transaction. The non-transacted commands affect the data immediately, but they don't affect the transaction. The following command starts a transaction in the HKCU:\Software registry key.

Start-Transaction

The next three commands use the New-Item cmdlet to add keys to the registry. The first and third commands use the UseTransaction parameter to include the commands in the transaction. The second command omits the parameter. Because the second command isn't included in the transaction, it's effective immediately.

New-Item MyCompany1 -UseTransaction
New-Item MyCompany2
New-Item MyCompany3 -UseTransaction

To view the current state of the registry, use a Get-ChildItem (dir) command without the UseTransaction parameter. This command gets items that begin with M.

dir m*

The result shows that the MyCompany2 key is added to the registry, but the MyCompany1 and MyCompany3 keys, which are part of the transaction, aren't added.

Hive: HKEY_CURRENT_USER\Software

SKC  VC Name                           Property
---  -- ----                           --------
 83   1 Microsoft                      {(default)}
  0    0 MyCompany2                     {}

The following command commits the transaction.

Complete-Transaction

Now, the keys that were added as part of the transaction appear in the registry.

dir m*

Hive: HKEY_CURRENT_USER\Software

SKC  VC Name                           Property
---  -- ----                           --------
83   1 Microsoft                      {(default)}
0    0 MyCompany1                     {}
0    0 MyCompany2                     {}
0    0 MyCompany3                     {}

Example 5: Using automatic rollback

When a command in a transaction generates an error of any kind, the transaction is automatically rolled back.

This default behavior is designed for scripts that run transactions. Scripts are typically well tested and include error-handling logic, so errors aren't expected and should terminate the transaction.

The first command starts a transaction in the HKCU:\Software registry key.

Start-Transaction

The following command uses the New-Item cmdlet to add the MyCompany key to the registry. The command uses the UseTransaction parameter (the alias is usetx) to include the command in the transaction.

New-Item MyCompany -usetx

Because the MyCompany key already exists in the registry, the command fails, and the transaction is rolled back.

New-Item : A key at this path already exists
At line:1 char:9
+ New-Item <<<<  MyCompany -usetx

A Get-Transaction command confirms that the transaction has been rolled back and that the SubscriberCount is 0.

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                0                 RolledBack

Example 6: Changing the rollback preference

If you want the transaction to be more error tolerant, you can use the RollbackPreference parameter of Start-Transaction to change the preference.

The following command starts a transaction with a rollback preference of Never.

Start-Transaction -RollbackPreference Never

In this case, when the command fails, the transaction isn't automatically rolled back.

New-Item MyCompany -usetx

New-Item : A key at this path already exists
At line:1 char:9
+ New-Item <<<<  MyCompany -usetx

Because the transaction is still active, you can resubmit the command as part of the transaction.

New-Item MyOtherCompany -usetx

Example 7: Using the `Use-Transaction` cmdlet

The Use-Transaction cmdlet enables you to do direct scripting against transaction-enabled Microsoft .NET Framework objects. Use-Transaction takes a script block that can only contain commands and expressions that use transaction-enabled .NET Framework objects, such as instances of the Microsoft.PowerShell.Commands.Management.TransactedString class.

The following command starts a transaction.

Start-Transaction

The following New-Object command creates an instance of the TransactedString class and saves it in the $t variable.

$t = New-Object Microsoft.PowerShell.Commands.Management.TransactedString

The following command uses the Append method of the TransactedString object to add text to the string. Because the command isn't part of the transaction, the change is effective immediately.

$t.append("Windows")

The following command uses the same Append method to add text, but it adds the text as part of the transaction. The command is enclosed in braces, and it's set as the value of the ScriptBlock parameter of Use-Transaction. The UseTransaction parameter (usetx) is required.

Use-Transaction {$t.append(" PowerShell")} -usetx

To see the current content of the transacted string in $t, use the ToString method of the TransactedString object.

$t.tostring()

The output shows that only the non-transacted changes are effective.

Windows

To see the current content of the transacted string in $t from within the transaction, embed the expression in a Use-Transaction command.

Use-Transaction {$t.tostring()} -usetx

The output shows the transaction view.

PowerShell

The following command commits the transaction.

Complete-Transaction

To see the final string:

$t.tostring()
PowerShell

Example 8: Managing multi-subscriber transactions

When you start a transaction while another transaction is in progress, PowerShell doesn't create a second transaction by default. Instead, it adds a subscriber to the current transaction.

This example shows how to view and manage a multi-subscriber transaction.

Begin by starting a transaction in the HKCU:\Software key.

Start-Transaction

The following command uses the Get-Transaction command to get the active transaction.

Get-Transaction

The result shows the object that represents the active transaction.

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                1                 Active

The following command adds the MyCompany key to the registry. The command uses the UseTransaction parameter to include the command in the transaction.

New-Item MyCompany -UseTransaction

The following command uses the Start-Transaction command to start a transaction. Although this command is typed at the command prompt, this scenario is more likely to happen when you run a script that contains a transaction.

Start-Transaction

A Get-Transaction command shows that the subscriber count on the transaction object is incremented. The value is now 2.

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                2                 Active

The next command uses the New-ItemProperty cmdlet to add the MyKey registry entry to the MyCompany key. It uses the UseTransaction parameter to include the command in the transaction.

New-ItemProperty -path MyCompany -name MyKey -UseTransaction

The MyCompany key doesn't exist in the registry, but this command succeeds because the two commands are part of the same transaction.

The following command commits the transaction. If it rolled back the transaction, the transaction would be rolled back for all the subscribers.

Complete-Transaction

A Get-Transaction command shows that the subscriber count on the transaction object is 1, but the value of Status is still Active (not Committed).

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                1                 Active

To finish committing the transaction, enter a second Complete- Transaction command. To commit a multi-subscriber transaction, you must enter one Complete-Transaction command for each Start-Transaction command.

Complete-Transaction

Another Get-Transaction command shows that the transaction has been committed.

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                0                 Committed

Example 9: Managing independent transactions

When you start a transaction while another transaction is in progress, you can use the Independent parameter of Start-Transaction to make the new transaction independent of the original transaction.

When you do, Start-Transaction creates a new transaction object and makes the new transaction the active transaction.

Begin by starting a transaction in the HKCU:\Software key.

Start-Transaction

The following command uses the Get-Transaction command to get the active transaction.

Get-Transaction

The result shows the object that represents the active transaction.

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                1                 Active

The following command adds the MyCompany registry key as part of the transaction. It uses the UseTransaction parameter (usetx) to include the command in the active transaction.

New-Item MyCompany -use

The following command starts a new transaction. The command uses the Independent parameter to indicate that this transaction isn't a subscriber to the active transaction.

Start-Transaction -Independent

When you create an independent transaction, the new (most-recently created) transaction becomes the active transaction. You can use a Get-Transaction command to get the active transaction.

Get-Transaction

Note that the SubscriberCount of the transaction is 1, indicating that there are no other subscribers and that the transaction is new.

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                1                 Active

The new transaction must be finished (either committed or rolled back) before you can manage the original transaction.

The following command adds the MyOtherCompany key to the registry. It uses the UseTransaction parameter (usetx) to include the command in the active transaction.

New-Item MyOtherCompany -usetx

Now, roll back the transaction. If there were a single transaction with two subscribers, rolling back the transaction would roll back the entire transaction for all the subscribers.

However, because these transactions are independent, rolling back the newest transaction cancels the registry changes and makes the original transaction the active transaction.

Undo-Transaction

A Get-Transaction command confirms that the original transaction is still active in the session.

Get-Transaction

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                1                 Active

The following command commits the active transaction.

Complete-Transaction

A Get-ChildItem command shows that the registry has been changed.

dir m*

Hive: HKEY_CURRENT_USER\Software

SKC  VC Name                           Property
---  -- ----                           --------
 83   1 Microsoft                      {(default)}
  0   0 MyCompany                      {}

Jaa

about_Transactions

Short description

Long description

Transaction cmdlets

Transaction-enabled elements

The UseTransaction parameter

The transaction object

Active transactions

Subscribers and independent transactions

Changing data

Examples

Example 1: Committing a transaction

Example 2: Rolling back a transaction

Example 3: Previewing a transaction

Example 4: Combining transacted and non-transacted commands

Example 5: Using automatic rollback

Example 6: Changing the rollback preference

Example 7: Using the `Use-Transaction` cmdlet

Example 8: Managing multi-subscriber transactions

Example 9: Managing independent transactions

See also

Lisäresursseja

Jaa

about_Transactions

Short description

Long description

Transaction cmdlets

Transaction-enabled elements

The UseTransaction parameter

The transaction object

Active transactions

Subscribers and independent transactions

Changing data

Examples

Example 1: Committing a transaction

Example 2: Rolling back a transaction

Example 3: Previewing a transaction

Example 4: Combining transacted and non-transacted commands

Example 5: Using automatic rollback

Example 6: Changing the rollback preference

Example 7: Using the Use-Transaction cmdlet

Example 8: Managing multi-subscriber transactions

Example 9: Managing independent transactions

See also

Lisäresursseja

Example 7: Using the `Use-Transaction` cmdlet