Get-MailboxRestoreRequestStatistics
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
Use the Get-MailboxRestoreRequestStatistics cmdlet to view detailed information about restore requests.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Get-MailboxRestoreRequestStatistics
[-Identity] <MailboxRestoreRequestIdParameter>
[-Diagnostic]
[-DiagnosticArgument <String>]
[-DomainController <Fqdn>]
[-IncludeReport]
[-ReportOnly]
[<CommonParameters>] Get-MailboxRestoreRequestStatistics
[-Identity] <MailboxRestoreRequestIdParameter>
[-IncludeReport]
[-IncludeSkippedItems]
[-DiagnosticInfo <String>]
[-ReportOnly]
[<CommonParameters>] Get-MailboxRestoreRequestStatistics
-MRSInstance <Fqdn>
[-DomainController <Fqdn>]
[-RequestGuid <Guid>]
[<CommonParameters>] Get-MailboxRestoreRequestStatistics
-RequestQueue <DatabaseIdParameter>
[-Diagnostic]
[-DiagnosticArgument <String>]
[-DomainController <Fqdn>]
[-IncludeReport]
[-ReportOnly]
[-RequestGuid <Guid>]
[<CommonParameters>] Description
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-MailboxRestoreRequestStatistics -Identity "Tony\MailboxRestore1"This example returns the default statistics for the restore request with the identity Tony\MailboxRestore1. The type of information returned by default includes name, mailbox, status and percent complete.
Example 2
Get-MailboxRestoreRequestStatistics -Identity Tony\MailboxRestore | Export-CSV \\SERVER01\RestoreRequest_Reports\Tony_Restorestats.csvThis example returns the statistics for Tony Smith's mailbox and exports the report to a CSV file.
Example 3
Get-MailboxRestoreRequestStatistics -Identity Tony\MailboxRestore -IncludeReport | Format-ListThis example returns additional information about the restore request for Tony Smith's mailbox by using the IncludeReport parameter and by pipelining the results to the Format-List command.
Example 4
Get-MailboxRestoreRequestStatistics -MRSInstance CAS01.contoso.comIn Exchange Server 2010 and 2013, this example returns default statistics for a restore request being processed by the instance of MRS running on the server CAS01. This command only returns information for restore requests currently being processed by an instance of MRS. If the Client Access server is finished processing all restore requests, no information is returned. This command is for debugging purposes only and should only be performed if requested by support personnel.
Example 5
Get-MailboxRestoreRequest -Status Failed | Get-MailboxRestoreRequestStatistics -IncludeReport | Format-List > C:\Reports\AllRestoreReports.txtThis example returns additional information for all the restore requests that have a status of Failed by using the IncludeReport parameter and then saves the information to the text file C:\Reports\AllRestoreReports.txt.
Parameters
-Diagnostic
This parameter is available only in on-premises Exchange.
The Diagnostic switch specifies whether to return extremely detailed information in the results. You don't need to specify a value with this switch.
Typically, you use this switch only at the request of Microsoft Customer Service and Support to troubleshoot problems.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiagnosticArgument
This parameter is available only in on-premises Exchange.
The DiagnosticArgument parameter modifies the results that are returned by using the Diagnostic switch. Typically, you use the Diagnostic switch and the DiagnosticArgument parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiagnosticInfo
This parameter is available only in the cloud-based service.
Typically, you use the DiagnosticInfo parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-DomainController
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Identity
The Identity parameter specifies the identity of the restore request. The Identity parameter consists of the alias of the mailbox to be restored and the name that was specified when the restore request was created. The identity of the restore request uses the following syntax: Alias\Name.
If you didn't specify a name for the restore request when it was created, Exchange automatically generated the default name MailboxRestore. Exchange generates up to 10 names, starting with MailboxRestore and then MailboxRestoreX (where X = 1-9).
You can't use this parameter with the MRSInstance or RequestQueue parameters.
| Type: | MailboxRestoreRequestIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-IncludeReport
The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-IncludeSkippedItems
This parameter is available only in the cloud-based service.
{{ Fill IncludeSkippedItems Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-MRSInstance
This parameter is available only in Exchange Server 2010.
The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.
You can't use this parameter with the Identity or RequestQueue parameters.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-ReportOnly
The ReportOnly switch returns the results as an array of report entries (encoded strings). You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019, Exchange Online |
-RequestGuid
This parameter is available only in on-premises Exchange.
The RequestGuid parameter specifies the unique identifier for the restore request. To find the GUID, use the Get-MailboxRestoreRequest cmdlet.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-RequestQueue
This parameter is available only in on-premises Exchange.
This parameter is for debugging purposes only.
The RequestQueue parameter identifies the request based on the mailbox database where the request is being run. You can use any value that uniquely identifies the database. For example:
- Name
- Distinguished name (DN)
- GUID
You can't use this parameter with the Identity parameter.
| Type: | DatabaseIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.