Muokkaa

Jaa

Master.BoundingBox method (Visio)

  • Artikkeli

Returns a rectangle that tightly encloses the shapes of a master.

Syntax

expression. BoundingBox( _Flags_ , _lpr8Left_ , _lpr8Bottom_ , _lpr8Right_ , _lpr8Top_ )

expression A variable that represents a Master object.

Parameters

Name Required/Optional Data type Description
Flags Required Integer Flags that influence the bounding box calculated for each shape that contributes to the resulting bounding box.
lpr8Left Required Double Returns the x-coordinate of the left edge of the bounding box.
lpr8Bottom Required Double Returns the y-coordinate of the bottom edge of the bounding box.
lpr8Right Required Double Returns the x-coordinate of the right edge of the bounding box.
lpr8Top Required Double Returns the y-coordinate of the top edge of the bounding box.

Return value

Nothing

Remarks

For a Shape object, the BoundingBox method returns a rectangle that tightly encloses the shape and its subshapes.

For a Page, Master, or Selection object, the BoundingBox method returns a rectangle that tightly encloses the page's, master's, or selection's shapes and their subshapes.

If the BoundingBox method returns an error, or if it is asked to return the rectangle enclosing zero shapes, the rectangle returned is { left: 0, bottom: 0, right: -1, top: -1 }; otherwise, the rectangle returned has left less than or equal to (<=) right, and bottom less than or equal to (<=) top. The numbers returned are in internal units (inches).

The bounding rectangle returned for an individual shape depends on its Type property.

Constant Description
visTypePage Equivalent to Page.BoundingBox or Master.BoundingBox.
visTypeGroup Rectangle that tightly encloses the group and its subshapes.
visTypeShape Determined rectangle depends on flags. See the following table.
visTypeForeignObject Determined rectangle depends on flags. See the following table.
visTypeGuide Determined rectangle depends on flags. See the following table.

The method will raise an exception for object type visTypeDoc.

The Flags argument has several bits that control the bounding box retrieved for each shape. If more than one of the bits described in the following table is set, the rectangle determined for the shape covers all rectangles implied by the bits.

Flag Value Description
visBBoxUprightWH &H1 Returns a rectangle that is the smallest rectangle parallel to the local coordinate system of the shape's parent that encloses the shape's width-height box.If the shape is not rotated, its upright width-height box and its width-height box are the same. Paths in the shape's geometry need not and often don't lie entirely within the shape's width-height box.
visBBoxUprightText &H2 Returns a rectangle that is the smallest rectangle parallel to the local coordinate system of the shape's parent that encloses the shape's text.
visBBoxExtents &H4 Returns a rectangle that is the smallest rectangle parallel to the local coordinate system of the shape's parent that encloses the paths stroked by the shape's geometry.This may be larger or smaller than the shape's upright width-height box. The extents box determined for a shape of type visTypeForeignObject equals that shape's upright width-height box.
visBBoxIncludeHidden &H10 Includes hidden geometry.
visBBoxIgnoreVisible &H20 Ignores visible geometry.
visBBoxIncludeDataGraphics &H10000 Includes data-graphic callout shapes (and their sub-shapes) that are applied to the shapes of the master. Off by default.
visBBoxIncludeGuides &H1000 Includes extents for shapes of type visTypeguide. By default, the extents of shapes of type visTypeGuide are ignored.If you request guide extents, then only the x positions of vertical guides and the y positions of horizontal guides contribute to the rectangle that is returned. If any vertical guides are reported on, an infinite y extent is returned. If any horizontal guides are reported on, an infinite x extent is returned. If any rotated guides are reported on, infinite x and y extents are returned.
visBBoxDrawingCoords &H2000 Returns numbers in the drawing coordinate system of the page or master whose shapes are being considered. By default, the returned numbers are drawing units in the local coordinate system of the parent of the considered shapes.
visBBoxNoNonPrint &H4000 Ignores the extents of shapes that are nonprinting. A shape is nonprinting if the value of its NonPrinting cell is non-zero or it belongs only to nonprinting layers.

The extents rectangle is determined using the center of the shape's strokes; it does not take into account the width of the strokes. Nor does the rectangle include any area covered by shadows or line end markers. Microsoft Visio does not expose a means to determine a shape's "black bits" box, that is, the extents box adjusted to account for stroke widths, shadows, and line ends.

A shape may have control points or connection points that lie outside any of the bounding rectangles reported by the shape. You can determine the position of control points and connection points by querying results of the shape's cells.

Example

The following procedure prints the dimensions of the bounding box of the selected shape in the Immediate window. If more than one shape is selected in the active window, a message box indicating an error is displayed. In all cases, results are reported in the drawing units of the page or master to which the shape belongs. This means that if the shape is a subshape of a group, visBBoxDrawingCoords is passed as a flag to the BoundingBox method.

If the shape is a guide, the procedure passes visBBoxIncludeGuides to the BoundingBox method so that the shape will be considered to have extent. Three rectangles are reported for the shape:

  • visBBoxUprightWH : an upright box that encloses the shape's width-height box

  • visBBoxUprightText : an upright box that encloses the shape's text box

  • visBBoxExtents : an upright box that encloses the shape's paths

To run this macro, make sure exactly one shape is selected on the Visio drawing page.

 
Public Sub BoundingBox_Example() 
 
 Dim vsoSelection As Visio.Selection 
 Set vsoSelection = ActiveWindow.Selection 
 vsoSelection.IterationMode = visSelModeSkipSub 
 
 If vsoSelection.Count <> 1 Then 
 MsgBox "BoundingBox_Example() expects exactly one selected shape." 
 
 Else 
 
 Dim vsoShape As Visio.Shape 
 Set vsoShape = vsoSelection(1) 
 Dim intFlags As Integer 
 intFlags = 0 
 
 If vsoShape.ContainingShape.Type = visTypeGroup Then 
 
 intFlags = visBBoxDrawingCoords 
 
 End If 
 
 If vsoShape.Type = visTypeGuide Then 
 
 intFlags = intFlags + visBBoxIncludeGuides 
 
 End If 
 
 Dim dblTop As Double 
 Dim dblBottom As Double 
 Dim dblLeft As Double 
 Dim dblRight As Double 
 
 vsoShape.BoundingBox intFlags + visBBoxUprightWH, dblLeft, dblBottom, dblRight, dblTop 
 Debug.Print "Upright WH "; _ 
 "dblLeft:" & Application.FormatResult(dblLeft, "in", "", "#0.00 u"); _ 
 "dblBottom:" & Application.FormatResult(dblBottom, "in", "", "#0.00 u"); _ 
 "dblRight:" & Application.FormatResult(dblRight, "in", "", "#0.00 u"); _ 
 "dblTop:" & Application.FormatResult(dblTop, "in", "", "#0.00 u") 
 
 vsoShape.BoundingBox intFlags + visBBoxUprightText, dblLeft, dblBottom, dblRight, dblTop 
 Debug.Print "Upright text "; _ 
 "dblLeft:" & Application.FormatResult(dblLeft, "in", "", "#0.00 u"); _ 
 "dblBottom:" & Application.FormatResult(dblBottom, "in", "", "#0.00 u"); _ 
 "dblRight:" & Application.FormatResult(dblRight, "in", "", "#0.00 u"); _ 
 "dblTop:" & Application.FormatResult(dblTop, "in", "", "#0.00 u") 
 
 vsoShape.BoundingBox intFlags + visBBoxExtents, dblLeft, dblBottom, dblRight, dblTop 
 Debug.Print "Bounding Box "; _ 
 "dblLeft:" & Application.FormatResult(dblLeft, "in", "", "#0.00 u"); _ 
 "dblBottom:" & Application.FormatResult(dblBottom, "in", "", "#0.00 u"); _ 
 "dblRight:" & Application.FormatResult(dblRight, "in", "", "#0.00 u"); _ 
 "dblTop:" & Application.FormatResult(dblTop, "in", "", "#0.00 u") 
 
 End If 
 
End Sub

The following macro uses the BoundingBox method and the ShapesOverlap() function to determine if one shape (vsoShape2) overlaps another (vsoShape1).

Public Sub OverlappingShapes_Example() 
 
 Dim vsoShape1 As Visio.Shape 
 Dim vsoShape2 As Visio.Shape 
 Dim blsIsOverlapping As Boolean 
 
 
 Set vsoShape1 = Application.ActiveWindow.Page.Drop(Application.Documents.Item("BASIC_U.VSS").Masters.ItemU("Square"), 3, 9) 
 
 Set vsoShape2 = Application.ActiveWindow.Page.Drop(Application.Documents.Item("BASIC_U.VSS").Masters.ItemU("Pentagon"), 3, 8) 
 
 blsIsOverlapping = ShapesOverlap(vsoShape2, vsoShape1) 
 
 If blsIsOverlapping Then 
 Debug.Print "Shapes overlap." 
 Else 
 Debug.Print "Shapes don't overlap." 
 End If 
 
End Sub 
 
 
Private Function ShapesOverlap(vsoShape1 As IVShape, vsoShape2 As IVShape) As Boolean 
 
 Dim dblLeft1 As Double 
 Dim dblLeft2 As Double 
 Dim dblBottom1 As Double 
 Dim dblBottom2 As Double 
 Dim dblRight1 As Double 
 Dim dblRight2 As Double 
 Dim dblTop1 As Double 
 Dim dblTop2 As Double 
 
 vsoShape1.BoundingBox Flags + visBBoxExtents, dblLeft1, dblBottom1, dblRight1, dblTop1 
 vsoShape2.BoundingBox Flags + visBBoxExtents, dblLeft2, dblBottom2, dblRight2, dblTop2 
 
 If ((dblLeft2 >= dblLeft1 And dblLeft2 <= dblRight1) Or _ 
 (dblRight2 >= dblLeft1 And dblRight2 <= dblRight1)) And _ 
 ((dblTop2 >= dblBottom1 And dblTop2 <= dblTop1) Or _ 
 (dblBottom2 >= dblBottom1 And dblBottom2 <= dblTop1)) Then 
 ShapesOverlap = True 
 Else 
 ShapesOverlap = False 
 End If 
 
End Function

Support and feedback

Have questions or feedback about Office VBA or this documentation? Please see Office VBA support and feedback for guidance about the ways you can receive support and provide feedback.