Runtime configuration options for garbage collection

Artikkeli
08/09/2024

This page contains information about settings for the .NET runtime garbage collector (GC). If you're trying to achieve peak performance of a running app, consider using these settings. However, the defaults provide optimum performance for most applications in typical situations.

Settings are arranged into groups on this page. The settings within each group are commonly used in conjunction with each other to achieve a specific result.

Note

These configurations are only read by the runtime when the GC is initialized (usually this means during the process startup time). If you change an environment variable when a process is already running, the change won't be reflected in that process. Settings that can be changed through APIs at run time, such as latency level, are omitted from this page.
Because GC is per process, it rarely ever makes sense to set these configurations at the machine level. For example, you wouldn't want every .NET process on a machine to use server GC or the same heap hard limit.
For number values, use decimal notation for settings in the runtimeconfig.json or runtimeconfig.template.json file and hexadecimal notation for environment variable settings. For hexadecimal values, you can specify them with or without the "0x" prefix.
If you're using the environment variables, .NET 6 and later versions standardize on the prefix DOTNET_ instead of COMPlus_. However, the COMPlus_ prefix will continue to work. If you're using a previous version of the .NET runtime, you should still use the COMPlus_ prefix, for example, COMPlus_gcServer.

Ways to specify the configuration

For different versions of the .NET runtime, there are different ways to specify the configuration values. The following table shows a summary.

Config location	.NET versions this location applies to	Formats	How it's interpreted
runtimeconfig.json file/ runtimeconfig.template.json file	.NET (Core)	n	n is interpreted as a decimal value.
Environment variable	.NET Framework, .NET (Core)	0xn or n	n is interpreted as a hex value in either format
app.config file	.NET Framework	0xn	n is interpreted as a hex value¹

¹ You can specify a value without the 0x prefix for an app.config file setting, but it's not recommended. On .NET Framework 4.8+, due to a bug, a value specified without the 0x prefix is interpreted as hexadecimal, but on previous versions of .NET Framework, it's interpreted as decimal. To avoid having to change your config, use the 0x prefix when specifying a value in your app.config file.

For example, to specify 12 heaps for GCHeapCount for a .NET Framework app named A.exe, add the following XML to the A.exe.config file.

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    ...
    <runtime>
        <gcServer enabled="true"/>
        <GCHeapCount>0xc</GCHeapCount>
    </runtime>
</configuration>

For both .NET (Core) and .NET Framework, you can use environment variables.

On Windows using .NET 6 or a later version:

SET DOTNET_gcServer=1
SET DOTNET_GCHeapCount=c

On Windows using .NET 5 or earlier:

SET COMPlus_gcServer=1
SET COMPlus_GCHeapCount=c

On other operating systems:

For .NET 6 or later versions:

export DOTNET_gcServer=1
export DOTNET_GCHeapCount=c

For .NET 5 and earlier versions:

export COMPlus_gcServer=1
export COMPlus_GCHeapCount=c

If you're not using .NET Framework, you can also set the value in the runtimeconfig.json or runtimeconfig.template.json file.

runtimeconfig.json file:

{
  "runtimeOptions": {
   "configProperties": {
      "System.GC.Server": true,
      "System.GC.HeapCount": 12
   }
  }
}

runtimeconfig.template.json file:

{
  "configProperties": {
    "System.GC.Server": true,
    "System.GC.HeapCount": 12
  }
}

Flavors of garbage collection

The two main flavors of garbage collection are workstation GC and server GC. For more information about differences between the two, see Workstation and server garbage collection.

The subflavors of garbage collection are background and non-concurrent.

Use the following settings to select flavors of garbage collection:

Workstation vs. server GC
Background GC

Workstation vs. server

Configures whether the application uses workstation garbage collection or server garbage collection.
Default: Workstation garbage collection. This is equivalent to setting the value to false.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.Server`	`false` - workstation `true` - server	.NET Core 1.0
MSBuild property	`ServerGarbageCollection`	`false` - workstation `true` - server	.NET Core 1.0
Environment variable	`COMPlus_gcServer`	`0` - workstation `1` - server	.NET Core 1.0
Environment variable	`DOTNET_gcServer`	`0` - workstation `1` - server	.NET 6
app.config for .NET Framework	GCServer	`false` - workstation `true` - server

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.Server": true
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.Server": true
   }
}

Project file:

<Project Sdk="Microsoft.NET.Sdk">

  <PropertyGroup>
    <ServerGarbageCollection>true</ServerGarbageCollection>
  </PropertyGroup>

</Project>

Background GC

Configures whether background (concurrent) garbage collection is enabled.
Default: Use background GC. This is equivalent to setting the value to true.
For more information, see Background garbage collection.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.Concurrent`	`true` - background GC `false` - non-concurrent GC	.NET Core 1.0
MSBuild property	`ConcurrentGarbageCollection`	`true` - background GC `false` - non-concurrent GC	.NET Core 1.0
Environment variable	`COMPlus_gcConcurrent`	`1` - background GC `0` - non-concurrent GC	.NET Core 1.0
Environment variable	`DOTNET_gcConcurrent`	`1` - background GC `0` - non-concurrent GC	.NET 6
app.config for .NET Framework	gcConcurrent	`true` - background GC `false` - non-concurrent GC

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.Concurrent": false
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.Concurrent": false
   }
}

Project file:

<Project Sdk="Microsoft.NET.Sdk">

  <PropertyGroup>
    <ConcurrentGarbageCollection>false</ConcurrentGarbageCollection>
  </PropertyGroup>

</Project>

Manage resource usage

Use the following settings to manage the garbage collector's memory and processor usage:

Affinitize
Affinitize mask
Affinitize ranges
CPU groups
Heap count
Heap hard limit
Heap hard limit percent
Per-object-heap hard limits
Per-object-heap hard limit percents
High memory percent
Retain VM

For more information about some of these settings, see the Middle ground between workstation and server GC blog entry.

Heap count

Limits the number of heaps created by the garbage collector.
Applies to server garbage collection only.
If GC processor affinity is enabled, which is the default, the heap count setting affinitizes n GC heaps/threads to the first n processors. (Use the affinitize mask or affinitize ranges settings to specify exactly which processors to affinitize.)
If GC processor affinity is disabled, this setting limits the number of GC heaps.
For more information, see the GCHeapCount remarks.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapCount`	decimal value	.NET Core 3.0
Environment variable	`COMPlus_GCHeapCount`	hexadecimal value	.NET Core 3.0
Environment variable	`DOTNET_GCHeapCount`	hexadecimal value	.NET 6
app.config for .NET Framework	GCHeapCount	decimal value	.NET Framework 4.6.2

This configuration setting doesn't have a specific MSBuild property. However, you can add a RuntimeHostConfigurationOption MSBuild item instead. Use the runtimeconfig.json setting name as the value of the Include attribute. For an example, see MSBuild properties.

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.HeapCount": 16
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.HeapCount": 16
   }
}

Tip

If you're setting the option in runtimeconfig.json, specify a decimal value. If you're setting the option as an environment variable, specify a hexadecimal value. For example, to limit the number of heaps to 16, the values would be 16 for the JSON file and 0x10 or 10 for the environment variable.

Affinitize mask

Specifies the exact processors that garbage collector threads should use.
If GC processor affinity is disabled, this setting is ignored.
Applies to server garbage collection only.
The value is a bit mask that defines the processors that are available to the process. For example, a decimal value of 1023 (or a hexadecimal value of 0x3FF or 3FF if you're using the environment variable) is 0011 1111 1111 in binary notation. This specifies that the first 10 processors are to be used. To specify the next 10 processors, that is, processors 10-19, specify a decimal value of 1047552 (or a hexadecimal value of 0xFFC00 or FFC00), which is equivalent to a binary value of 1111 1111 1100 0000 0000.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapAffinitizeMask`	decimal value	.NET Core 3.0
Environment variable	`COMPlus_GCHeapAffinitizeMask`	hexadecimal value	.NET Core 3.0
Environment variable	`DOTNET_GCHeapAffinitizeMask`	hexadecimal value	.NET 6
app.config for .NET Framework	GCHeapAffinitizeMask	decimal value	.NET Framework 4.6.2

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.HeapAffinitizeMask": 1023
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.HeapAffinitizeMask": 1023
   }
}

Affinitize ranges

Specifies the list of processors to use for garbage collector threads.
This setting is similar to System.GC.HeapAffinitizeMask, except it allows you to specify more than 64 processors.
For Windows operating systems, prefix the processor number or range with the corresponding CPU group, for example, "0:1-10,0:12,1:50-52,1:7". If you don't actually have more than 1 CPU group, you can't use this setting. You must use the Affinitize mask setting. And the numbers you specify are within that group, which means it cannot be >= 64.
For Linux operating systems, where the CPU group concept doesn't exist, you can use both this setting and the Affinitize mask setting to specify the same ranges. And instead of "0:1-10", specify "1-10" because you don't need to specify a group index.
If GC processor affinity is disabled, this setting is ignored.
Applies to server garbage collection only.
For more information, see Making CPU configuration better for GC on machines with > 64 CPUs on Maoni Stephens' blog.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapAffinitizeRanges`	Comma-separated list of processor numbers or ranges of processor numbers. Unix example: "1-10,12,50-52,70" Windows example: "0:1-10,0:12,1:50-52,1:7"	.NET Core 3.0
Environment variable	`COMPlus_GCHeapAffinitizeRanges`	Comma-separated list of processor numbers or ranges of processor numbers. Unix example: "1-10,12,50-52,70" Windows example: "0:1-10,0:12,1:50-52,1:7"	.NET Core 3.0
Environment variable	`DOTNET_GCHeapAffinitizeRanges`	Comma-separated list of processor numbers or ranges of processor numbers. Unix example: "1-10,12,50-52,70" Windows example: "0:1-10,0:12,1:50-52,1:7"	.NET 6

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.HeapAffinitizeRanges": "0:1-10,0:12,1:50-52,1:7"
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.HeapAffinitizeRanges": "0:1-10,0:12,1:50-52,1:7"
   }
}

CPU groups

Configures whether the garbage collector uses CPU groups or not.

When a 64-bit Windows computer has multiple CPU groups, that is, there are more than 64 processors, enabling this element extends garbage collection across all CPU groups. The garbage collector uses all cores to create and balance heaps.

Note

This is a Windows-only concept. In older Windows versions, Windows limited a process to one CPU group. Thus, GC only used one CPU group unless you used this setting to enable multiple CPU groups. This OS limitation was lifted in Windows 11 and Server 2022. Also, starting in .NET 7, GC by default uses all CPU groups when running on Windows 11 or Server 2022.
Applies to server garbage collection on 64-bit Windows operating systems only.
Default: GC does not extend across CPU groups. This is equivalent to setting the value to 0.
For more information, see Making CPU configuration better for GC on machines with > 64 CPUs on Maoni Stephens' blog.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.CpuGroup`	`false` - disabled `true` - enabled	.NET 5
Environment variable	`COMPlus_GCCpuGroup`	`0` - disabled `1` - enabled	.NET Core 1.0
Environment variable	`DOTNET_GCCpuGroup`	`0` - disabled `1` - enabled	.NET 6
app.config for .NET Framework	GCCpuGroup	`false` - disabled `true` - enabled

Note

To configure the common language runtime (CLR) to also distribute threads from the thread pool across all CPU groups, enable the Thread_UseAllCpuGroups element option. For .NET Core apps, you can enable this option by setting the value of the DOTNET_Thread_UseAllCpuGroups environment variable to 1.

Affinitize

Specifies whether to affinitize garbage collection threads with processors. To affinitize a GC thread means that it can only run on its specific CPU. A heap is created for each GC thread.
Applies to server garbage collection only.
Default: Affinitize garbage collection threads with processors. This is equivalent to setting the value to false.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.NoAffinitize`	`false` - affinitize `true` - don't affinitize	.NET Core 3.0
Environment variable	`COMPlus_GCNoAffinitize`	`0` - affinitize `1` - don't affinitize	.NET Core 3.0
Environment variable	`DOTNET_GCNoAffinitize`	`0` - affinitize `1` - don't affinitize	.NET 6
app.config for .NET Framework	GCNoAffinitize	`false` - affinitize `true` - don't affinitize	.NET Framework 4.6.2

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.NoAffinitize": true
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.NoAffinitize": true
   }
}

Heap hard limit

The heap hard limit is defined as the maximum commit size, in bytes, for the GC heap and GC bookkeeping.
This setting only applies to 64-bit computers.
If this limit isn't configured but the process is running in a memory-constrained environment, that is, inside a container with a specified memory limit, a default value is set. That default is the greater of 20 MB or 75% of the memory limit on the container.
This setting is ignored if the Per-object-heap hard limits are configured.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimit`	decimal value	.NET Core 3.0
Environment variable	`COMPlus_GCHeapHardLimit`	hexadecimal value	.NET Core 3.0
Environment variable	`DOTNET_GCHeapHardLimit`	hexadecimal value	.NET 6

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.HeapHardLimit": 209715200
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.HeapHardLimit": 209715200
   }
}

Tip

If you're setting the option in runtimeconfig.json, specify a decimal value. If you're setting the option as an environment variable, specify a hexadecimal value. For example, to specify a heap hard limit of 200 mebibytes (MiB), the values would be 209715200 for the JSON file and 0xC800000 or C800000 for the environment variable.

Heap hard limit percent

Specifies the heap hard limit as a percentage of the total physical memory. If the process is running in a memory-constrained environment, that is, inside a container with a specified memory limit, the total physical memory is the memory limit; otherwise it's what's available on the machine.
This setting only applies to 64-bit computers.
This setting is ignored if the Per-object-heap hard limits are configured or the heap hard limit is configured.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimitPercent`	decimal value	.NET Core 3.0
Environment variable	`COMPlus_GCHeapHardLimitPercent`	hexadecimal value	.NET Core 3.0
Environment variable	`DOTNET_GCHeapHardLimitPercent`	hexadecimal value	.NET 6

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.HeapHardLimitPercent": 30
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.HeapHardLimitPercent": 30
   }
}

Tip

If you're setting the option in runtimeconfig.json, specify a decimal value. If you're setting the option as an environment variable, specify a hexadecimal value. For example, to limit the heap usage to 30%, the values would be 30 for the JSON file and 0x1E or 1E for the environment variable.

Per-object-heap hard limits

You can specify the GC's heap hard limit on a per-object-heap basis. The different heaps are the large object heap (LOH), small object heap (SOH), and pinned object heap (POH).

If you specify a value for any of the DOTNET_GCHeapHardLimitSOH, DOTNET_GCHeapHardLimitLOH, or DOTNET_GCHeapHardLimitPOH settings, you must also specify a value for DOTNET_GCHeapHardLimitSOH and DOTNET_GCHeapHardLimitLOH. If you don't, the runtime will fail to initialize.
The default value for DOTNET_GCHeapHardLimitPOH is 0. DOTNET_GCHeapHardLimitSOH and DOTNET_GCHeapHardLimitLOH don't have default values.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimitSOH`	decimal value	.NET 5
Environment variable	`COMPlus_GCHeapHardLimitSOH`	hexadecimal value	.NET 5
Environment variable	`DOTNET_GCHeapHardLimitSOH`	hexadecimal value	.NET 6

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimitLOH`	decimal value	.NET 5
Environment variable	`COMPlus_GCHeapHardLimitLOH`	hexadecimal value	.NET 5
Environment variable	`DOTNET_GCHeapHardLimitLOH`	hexadecimal value	.NET 6

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimitPOH`	decimal value	.NET 5
Environment variable	`COMPlus_GCHeapHardLimitPOH`	hexadecimal value	.NET 5
Environment variable	`DOTNET_GCHeapHardLimitPOH`	hexadecimal value	.NET 6

These configuration settings don't have specific MSBuild properties. However, you can add a RuntimeHostConfigurationOption MSBuild item instead. Use the runtimeconfig.json setting name as the value of the Include attribute. For an example, see MSBuild properties.

Tip

If you're setting the option in runtimeconfig.json, specify a decimal value. If you're setting the option as an environment variable, specify a hexadecimal value. For example, to specify a heap hard limit of 200 mebibytes (MiB), the values would be 209715200 for the JSON file and 0xC800000 or C800000 for the environment variable.

Per-object-heap hard limit percents

You can specify the GC's heap hard limit on a per-object-heap basis. The different heaps are the large object heap (LOH), small object heap (SOH), and pinned object heap (POH).

If you specify a value for any of the DOTNET_GCHeapHardLimitSOHPercent, DOTNET_GCHeapHardLimitLOHPercent, or DOTNET_GCHeapHardLimitPOHPercent settings, you must also specify a value for DOTNET_GCHeapHardLimitSOHPercent and DOTNET_GCHeapHardLimitLOHPercent. If you don't, the runtime will fail to initialize.
These settings are ignored if DOTNET_GCHeapHardLimitSOH, DOTNET_GCHeapHardLimitLOH, and DOTNET_GCHeapHardLimitPOH are specified.
A value of 1 means that GC uses 1% of total physical memory for that object heap.
Each value must be greater than zero and less than 100. Additionally, the sum of the three percentage values must be less than 100. Otherwise, the runtime will fail to initialize.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimitSOHPercent`	decimal value	.NET 5
Environment variable	`COMPlus_GCHeapHardLimitSOHPercent`	hexadecimal value	.NET 5
Environment variable	`DOTNET_GCHeapHardLimitSOHPercent`	hexadecimal value	.NET 6

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimitLOHPercent`	decimal value	.NET 5
Environment variable	`COMPlus_GCHeapHardLimitLOHPercent`	hexadecimal value	.NET 5
Environment variable	`DOTNET_GCHeapHardLimitLOHPercent`	hexadecimal value	.NET 6

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HeapHardLimitPOHPercent`	decimal value	.NET 5
Environment variable	`COMPlus_GCHeapHardLimitPOHPercent`	hexadecimal value	.NET 5
Environment variable	`DOTNET_GCHeapHardLimitPOHPercent`	hexadecimal value	.NET 6

Tip

If you're setting the option in runtimeconfig.json, specify a decimal value. If you're setting the option as an environment variable, specify a hexadecimal value. For example, to limit the heap usage to 30%, the values would be 30 for the JSON file and 0x1E or 1E for the environment variable.

High memory percent

Memory load is indicated by the percentage of physical memory in use. By default, when the physical memory load reaches 90%, garbage collection becomes more aggressive about doing full, compacting garbage collections to avoid paging. When memory load is below 90%, GC favors background collections for full garbage collections, which have shorter pauses but don't reduce the total heap size by much. On machines with a significant amount of memory (80GB or more), the default load threshold is between 90% and 97%.

The high memory load threshold can be adjusted by the DOTNET_GCHighMemPercent environment variable or System.GC.HighMemoryPercent JSON configuration setting. Consider adjusting the threshold if you want to control heap size. For example, for the dominant process on a machine with 64GB of memory, it's reasonable for GC to start reacting when there's 10% of memory available. But for smaller processes, for example, a process that only consumes 1GB of memory, GC can comfortably run with less than 10% of memory available. For these smaller processes, consider setting the threshold higher. On the other hand, if you want larger processes to have smaller heap sizes (even when there's plenty of physical memory available), lowering this threshold is an effective way for GC to react sooner to compact the heap down.

Note

For processes running in a container, GC considers the physical memory based on the container limit.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.HighMemoryPercent`	decimal value	.NET 5
Environment variable	`COMPlus_GCHighMemPercent`	hexadecimal value	.NET Core 3.0 .NET Framework 4.7.2
Environment variable	`DOTNET_GCHighMemPercent`	hexadecimal value	.NET 6

Tip

If you're setting the option in runtimeconfig.json, specify a decimal value. If you're setting the option as an environment variable, specify a hexadecimal value. For example, to set the high memory threshold to 75%, the values would be 75 for the JSON file and 0x4B or 4B for the environment variable.

Retain VM

Configures whether segments that should be deleted are put on a standby list for future use or are released back to the operating system (OS).
Default: Release segments back to the operating system. This is equivalent to setting the value to false.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.RetainVM`	`false` - release to OS `true` - put on standby	.NET Core 1.0
MSBuild property	`RetainVMGarbageCollection`	`false` - release to OS `true` - put on standby	.NET Core 1.0
Environment variable	`COMPlus_GCRetainVM`	`0` - release to OS `1` - put on standby	.NET Core 1.0
Environment variable	`DOTNET_GCRetainVM`	`0` - release to OS `1` - put on standby	.NET 6

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.RetainVM": true
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.RetainVM": true
   }
}

Project file:

<Project Sdk="Microsoft.NET.Sdk">

  <PropertyGroup>
    <RetainVMGarbageCollection>true</RetainVMGarbageCollection>
  </PropertyGroup>

</Project>

Large pages

Specifies whether large pages should be used when a heap hard limit is set.
Default: Don't use large pages when a heap hard limit is set. This is equivalent to setting the value to 0.
This is an experimental setting.

	Setting name	Values	Version introduced
runtimeconfig.json	N/A	N/A	N/A
Environment variable	`COMPlus_GCLargePages`	`0` - disabled `1` - enabled	.NET Core 3.0
Environment variable	`DOTNET_GCLargePages`	`0` - disabled `1` - enabled	.NET 6

Allow large objects

Configures garbage collector support on 64-bit platforms for arrays that are greater than 2 gigabytes (GB) in total size.
Default: GC supports arrays greater than 2-GB. This is equivalent to setting the value to 1.
This option may become obsolete in a future version of .NET.

	Setting name	Values	Version introduced
runtimeconfig.json	N/A	N/A	N/A
Environment variable	`COMPlus_gcAllowVeryLargeObjects`	`1` - enabled `0` - disabled	.NET Core 1.0
Environment variable	`DOTNET_gcAllowVeryLargeObjects`	`1` - enabled `0` - disabled	.NET 6
app.config for .NET Framework	gcAllowVeryLargeObjects	`1` - enabled `0` - disabled	.NET Framework 4.5

Large object heap threshold

Specifies the threshold size, in bytes, that causes objects to go on the large object heap (LOH).
The default threshold is 85,000 bytes.
The value you specify must be larger than the default threshold.
The value might be capped by the runtime to the maximum possible size for the current configuration. You can inspect the value in use at run time through the GC.GetConfigurationVariables() API.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.LOHThreshold`	decimal value	.NET Core 3.0
Environment variable	`COMPlus_GCLOHThreshold`	hexadecimal value	.NET Core 3.0
Environment variable	`DOTNET_GCLOHThreshold`	hexadecimal value	.NET 6
app.config for .NET Framework	GCLOHThreshold	decimal value	.NET Framework 4.8

Examples

runtimeconfig.json file:

{
   "runtimeOptions": {
      "configProperties": {
         "System.GC.LOHThreshold": 120000
      }
   }
}

runtimeconfig.template.json file:

{
   "configProperties": {
      "System.GC.LOHThreshold": 120000
   }
}

Tip

If you're setting the option in runtimeconfig.json, specify a decimal value. If you're setting the option as an environment variable, specify a hexadecimal value. For example, to set a threshold size of 120,000 bytes, the values would be 120000 for the JSON file and 0x1D4C0 or 1D4C0 for the environment variable.

Standalone GC

To use a standalone garbage collector instead of the default GC implementation, you can specify either the path (in .NET 9 and later versions) or the name of a GC native library.

Path

Specifies the full path of a GC native library that the runtime loads in place of the default GC implementation. To be secure, this location should be protected from potentially malicious tampering.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.Path`	string_path	.NET 9
Environment variable	`DOTNET_GCPath`	string_path	.NET 9

Name

Specifies the name of a GC native library that the runtime loads in place of the default GC implementation. The behavior changed in .NET 9 with the introduction of the Path config.

In .NET 8 and previous versions:
- If only a name of the library is specified, the library must reside in the same directory as the .NET runtime (coreclr.dll on Windows, libcoreclr.so on Linux, or libcoreclr.dylib on OSX).
- The value can also be a relative path, for example, if you specify "..\clrgc.dll" on Windows, clrgc.dll is loaded from the parent directory of the .NET runtime directory.
In .NET 9 and later versions, this value specifies a file name only (paths aren't allowed):
- .NET searches for the name you specify in the directory where the assembly that contains your app's Main method resides.
- If the file isn't found, the .NET runtime directory is searched.
This configuration setting is ignored if the Path config is specified.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.Name`	string_name	.NET 7
Environment variable	`COMPlus_GCName`	string_name	.NET Core 2.0
Environment variable	`DOTNET_GCName`	string_name	.NET 6

Conserve memory

Configures the garbage collector to conserve memory at the expense of more frequent garbage collections and possibly longer pause times.
Default value is 0 - this implies no change.
Besides the default value 0, values between 1 and 9 (inclusive) are valid. The higher the value, the more the garbage collector tries to conserve memory and thus to keep the heap small.
If the value is non-zero, the large object heap will be compacted automatically if it has too much fragmentation.

	Setting name	Values	Version introduced
runtimeconfig.json	`System.GC.ConserveMemory`	`0` - `9`	.NET 6
Environment variable	`COMPlus_GCConserveMemory`	`0` -`9`	.NET Framework 4.8
Environment variable	`DOTNET_GCConserveMemory`	`0` -`9`	.NET 6
app.config for .NET Framework	GCConserveMemory	`0` -`9`	.NET Framework 4.8

Example app.config file:


<configuration>
  <runtime>
    <GCConserveMemory enabled="5"/>
  </runtime>
</configuration>

Tip

Experiment with different numbers to see which value works best for you. Start with a value between 5 and 7.

Dynamic adaptation to application sizes (DATAS)

Configures the garbage collector to use DATAS. DATAS adapts to application memory requirements, meaning the app heap size should be roughly proportional to the long-lived data size.
Enabled by default starting in .NET 9.

	Setting name	Values	Version introduced
Environment variable	`DOTNET_GCDynamicAdaptationMode`	`1` - enabled `0` - disabled	.NET 8
MSBuild property	`GarbageCollectionAdaptationMode`	`1` - enabled `0` - disabled	.NET 8
runtimeconfig.json	`System.GC.DynamicAdaptationMode`	`1` - enabled `0` - disabled	.NET 8

Jaa

Runtime configuration options for garbage collection

Ways to specify the configuration

Flavors of garbage collection

Workstation vs. server

Examples

Background GC

Examples

Manage resource usage

Heap count

Examples

Affinitize mask

Examples

Affinitize ranges

Examples

CPU groups

Affinitize

Examples

Heap hard limit

Examples

Heap hard limit percent

Examples

Per-object-heap hard limits

Per-object-heap hard limit percents

High memory percent

Retain VM

Examples

Large pages

Allow large objects

Large object heap threshold

Examples

Standalone GC

Path

Name

Conserve memory

Dynamic adaptation to application sizes (DATAS)

Lisäresursseja