Muokkaa

Jaa

TN065: Dual-Interface Support for OLE Automation Servers

  • Artikkeli

Note

The following technical note has not been updated since it was first included in the online documentation. As a result, some procedures and topics might be out of date or incorrect. For the latest information, it is recommended that you search for the topic of interest in the online documentation index.

This note discusses how to add dual-interface support to an MFC-based OLE Automation server application. The ACDUAL sample illustrates dual-interface support, and the example code in this note is taken from ACDUAL. The macros described in this note, such as DECLARE_DUAL_ERRORINFO, DUAL_ERRORINFO_PART, and IMPLEMENT_DUAL_ERRORINFO, are part of the ACDUAL sample and can be found in MFCDUAL.H.

Dual Interfaces

Although OLE Automation allows you to implement an IDispatch interface, a VTBL interface, or a dual interface (which encompasses both), Microsoft strongly recommends that you implement dual interfaces for all exposed OLE Automation objects. Dual interfaces have significant advantages over IDispatch-only or VTBL-only interfaces:

  • Binding can take place at compile time through the VTBL interface, or at run time through IDispatch.

  • OLE Automation controllers that can use the VTBL interface may benefit from improved performance.

  • Existing OLE Automation controllers that use the IDispatch interface will continue to work.

  • The VTBL interface is easier to call from C++.

  • Dual interfaces are required for compatibility with Visual Basic object support features.

Adding Dual-Interface Support to a CCmdTarget-Based Class

A dual interface is really just a custom interface derived from IDispatch. The most straightforward way to implement dual-interface support in a CCmdTarget-based class is to first implement the normal dispatch interface on your class using MFC and ClassWizard, then add the custom interface later. For the most part, your custom interface implementation will simply delegate back to the MFC IDispatch implementation.

First, modify the ODL file for your server to define dual interfaces for your objects. To define a dual interface, you must use an interface statement, instead of the DISPINTERFACE statement that the Visual C++ wizards generate. Rather than removing the existing DISPINTERFACE statement, add a new interface statement. By retaining the DISPINTERFACE form, you can continue to use ClassWizard to add properties and methods to your object, but you must add the equivalent properties and methods to your interface statement.

An interface statement for a dual interface must have the OLEAUTOMATION and DUAL attributes, and the interface must be derived from IDispatch. You can use the GUIDGEN sample to create a IID for the dual interface:

[ uuid(0BDD0E81-0DD7-11cf-BBA8-444553540000), // IID_IDualAClick
    oleautomation,
    dual
]
interface IDualAClick : IDispatch
    {
    };

Once you have the interface statement in place, start adding entries for the methods and properties. For dual interfaces, you need to rearrange the parameter lists so that your methods and property accessor functions in the dual interface return an HRESULT and pass their return values as parameters with the attributes [retval,out]. Remember that for properties, you will need to add both a read (propget) and write (propput) access function with the same id. For example:

[propput, id(1)] HRESULT text([in] BSTR newText);
[propget, id(1)] HRESULT text([out, retval] BSTR* retval);

After your methods and properties are defined, you need to add a reference to the interface statement in your coclass statement. For example:

[ uuid(4B115281-32F0-11cf-AC85-444553540000) ]
coclass Document
{
    dispinterface IAClick;
    [default] interface IDualAClick;
};

Once your ODL file has been updated, use MFC's interface map mechanism to define an implementation class for the dual interface in your object class and make the corresponding entries in MFC's QueryInterface mechanism. You need one entry in the INTERFACE_PART block for each entry in the interface statement of the ODL, plus the entries for a dispatch interface. Each ODL entry with the propput attribute needs a function named put_propertyname. Each entry with the propget attribute needs a function named get_propertyname.

To define an implementation class for your dual interface, add a DUAL_INTERFACE_PART block to your object class definition. For example:

BEGIN_DUAL_INTERFACE_PART(DualAClick, IDualAClick)
    STDMETHOD(put_text)(THIS_ BSTR newText);
    STDMETHOD(get_text)(THIS_ BSTR FAR* retval);
    STDMETHOD(put_x)(THIS_ short newX);
    STDMETHOD(get_x)(THIS_ short FAR* retval);
    STDMETHOD(put_y)(THIS_ short newY);
    STDMETHOD(get_y)(THIS_ short FAR* retval);
    STDMETHOD(put_Position)(THIS_ IDualAutoClickPoint FAR* newPosition);
    STDMETHOD(get_Position)(THIS_ IDualAutoClickPoint FAR* FAR* retval);
    STDMETHOD(RefreshWindow)(THIS);
    STDMETHOD(SetAllProps)(THIS_ short x, short y, BSTR text);
    STDMETHOD(ShowWindow)(THIS);
END_DUAL_INTERFACE_PART(DualAClick)

To connect the dual interface to MFC's QueryInterface mechanism, add an INTERFACE_PART entry to the interface map:

BEGIN_INTERFACE_MAP(CAutoClickDoc, CDocument)
    INTERFACE_PART(CAutoClickDoc, DIID_IAClick, Dispatch)
    INTERFACE_PART(CAutoClickDoc, IID_IDualAClick, DualAClick)
END_INTERFACE_MAP()

Next, you need to fill in the implementation of the interface. For the most part, you will be able to delegate to the existing MFC IDispatch implementation. For example:

STDMETHODIMP_(ULONG) CAutoClickDoc::XDualAClick::AddRef()
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    return pThis->ExternalAddRef();
}

STDMETHODIMP_(ULONG) CAutoClickDoc::XDualAClick::Release()
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    return pThis->ExternalRelease();
}

STDMETHODIMP CAutoClickDoc::XDualAClick::QueryInterface(
    REFIID iid,
    LPVOID* ppvObj)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    return pThis->ExternalQueryInterface(&iid, ppvObj);
}

STDMETHODIMP CAutoClickDoc::XDualAClick::GetTypeInfoCount(
    UINT FAR* pctinfo)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    LPDISPATCH lpDispatch = pThis->GetIDispatch(FALSE);
    ASSERT(lpDispatch != NULL);
    return lpDispatch->GetTypeInfoCount(pctinfo);
}

STDMETHODIMP CAutoClickDoc::XDualAClick::GetTypeInfo(
    UINT itinfo,
    LCID lcid,
    ITypeInfo FAR* FAR* pptinfo)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    LPDISPATCH lpDispatch = pThis->GetIDispatch(FALSE);
    ASSERT(lpDispatch != NULL);

    return lpDispatch->GetTypeInfo(itinfo, lcid, pptinfo);
}

STDMETHODIMP CAutoClickDoc::XDualAClick::GetIDsOfNames(
    REFIID riid,
    OLECHAR FAR* FAR* rgszNames,
    UINT cNames,
    LCID lcid,
    DISPID FAR* rgdispid)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    LPDISPATCH lpDispatch = pThis->GetIDispatch(FALSE);
    ASSERT(lpDispatch != NULL);

    return lpDispatch->GetIDsOfNames(riid, rgszNames, cNames, lcid, rgdispid);
}

STDMETHODIMP CAutoClickDoc::XDualAClick::Invoke(
    DISPID dispidMember,
    REFIID riid,
    LCID lcid,
    WORD wFlags,
    DISPPARAMS FAR* pdispparams,
    VARIANT FAR* pvarResult,
    EXCEPINFO FAR* pexcepinfo,
    UINT FAR* puArgErr)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    LPDISPATCH lpDispatch = pThis->GetIDispatch(FALSE);
    ASSERT(lpDispatch != NULL);

    return lpDispatch->Invoke(dispidMember, riid, lcid,
        wFlags, pdispparams, pvarResult, pexcepinfo, puArgErr);
}

For your object's methods and property accessor functions, you need to fill in the implementation. Your method and property functions can generally delegate back to the methods generated using ClassWizard. However, if you set up properties to access variables directly, you need to write the code to get/put the value into the variable. For example:

STDMETHODIMP CAutoClickDoc::XDualAClick::put_text(BSTR newText)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    // MFC automatically converts from Unicode BSTR to
    // Ansi CString, if necessary...
    pThis->m_str = newText;
    return NOERROR;
}

STDMETHODIMP CAutoClickDoc::XDualAClick::get_text(BSTR* retval)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    // MFC automatically converts from Ansi CString to
    // Unicode BSTR, if necessary...
    pThis->m_str.SetSysString(retval);
    return NOERROR;
}

Passing Dual-Interface Pointers

Passing your dual-interface pointer isn't straightforward, especially if you need to call CCmdTarget::FromIDispatch. FromIDispatch only works on MFC's IDispatch pointers. One way to work around this is to query for the original IDispatch pointer set up by MFC and pass that pointer to functions that need it. For example:

STDMETHODIMP CAutoClickDoc::XDualAClick::put_Position(
    IDualAutoClickPoint FAR* newPosition)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    LPDISPATCH lpDisp = NULL;
    newPosition->QueryInterface(IID_IDispatch, (LPVOID*)&lpDisp);
    pThis->SetPosition(lpDisp);
    lpDisp->Release();
    return NOERROR;
}

Before passing a pointer back through the dual-interface method, you might need to convert it from the MFC IDispatch pointer to your dual-interface pointer. For example:

STDMETHODIMP CAutoClickDoc::XDualAClick::get_Position(
    IDualAutoClickPoint FAR* FAR* retval)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    LPDISPATCH lpDisp;
    lpDisp = pThis->GetPosition();
    lpDisp->QueryInterface(IID_IDualAutoClickPoint, (LPVOID*)retval);
    return NOERROR;
}

Registering the Application's Type Library

AppWizard does not generate code to register an OLE Automation server application's type library with the system. While there are other ways to register the type library, it is convenient to have the application register the type library when it is updating its OLE type information, that is, whenever the application is run stand-alone.

To register the application's type library whenever the application is run stand alone:

  • Include AFXCTL.H in your standard includes header file, STDAFX.H, to access the definition of the AfxOleRegisterTypeLib function.

  • In your application's InitInstance function, locate the call to COleObjectFactory::UpdateRegistryAll. Following this call, add a call to AfxOleRegisterTypeLib, specifying the LIBID corresponding to your type library, along with the name of your type library:

    // When a server application is launched stand-alone, it is a good idea
// to update the system registry in case it has been damaged.
m_server.UpdateRegistry(OAT_DISPATCH_OBJECT);

COleObjectFactory::UpdateRegistryAll();

// DUAL_SUPPORT_START
    // Make sure the type library is registered or dual interface won't work.
    AfxOleRegisterTypeLib(AfxGetInstanceHandle(),
        LIBID_ACDual,
        _T("AutoClik.TLB"));
// DUAL_SUPPORT_END

Modifying Project Build Settings to Accommodate Type Library Changes

To modify a project's build settings so that a header file containing UUID definitions is generated by MkTypLib whenever the type library is rebuilt:

  1. On the Build menu, click Settings, and then select the ODL file from the file list for each configuration.

  2. Click the OLE Types tab and specify a filename in the Output header filename field. Use a filename that is not already used by your project, because MkTypLib will overwrite any existing file. Click OK to close the Build Settings dialog box.

To add the UUID definitions from the MkTypLib-generated header file to your project:

  1. Include the MkTypLib-generated header file in your standard includes header file, stdafx.h.

  2. Create a new file, INITIIDS.CPP, and add it to your project. In this file, include your MkTypLib-generated header file after including OLE2.H and INITGUID.H:

    // initIIDs.c: defines IIDs for dual interfaces
// This must not be built with precompiled header.
#include <ole2.h>
#include <initguid.h>
#include "acdual.h"

  3. On the Build menu, click Settings, and then select INITIIDS.CPP from the file list for each configuration.

  4. Click the C++ tab, click category Precompiled Headers, and select the Not using precompiled headers radio button. Click OK to close the Build Settings dialog box.

Specifying the Correct Object Class Name in the Type Library

The wizards shipped with Visual C++ incorrectly use the implementation class name to specify the coclass in the server's ODL file for OLE-creatable classes. While this will work, the implementation class name is probably not the class name you want users of your object to use. To specify the correct name, open the ODL file, locate each coclass statement, and replace the implementation class name with the correct external name.

Note that when the coclass statement is changed, the variable names of CLSIDs in the MkTypLib-generated header file will change accordingly. You will need to update your code to use the new variable names.

Handling Exceptions and the Automation Error Interfaces

Your automation object's methods and property accessor functions may throw exceptions. If so, you should handle them in your dual-interface implementation and pass information about the exception back to the controller through the OLE Automation error-handling interface, IErrorInfo. This interface provides for detailed, contextual error information through both IDispatch and VTBL interfaces. To indicate that an error handler is available, you should implement the ISupportErrorInfo interface.

To illustrate the error-handling mechanism, assume that the ClassWizard-generated functions used to implement the standard dispatch support throw exceptions. MFC's implementation of IDispatch::Invoke typically catches these exceptions and converts them into an EXCEPTINFO structure that is returned through the Invoke call. However, when VTBL interface is used, you are responsible for catching the exceptions yourself. As an example of protecting your dual-interface methods:

STDMETHODIMP CAutoClickDoc::XDualAClick::put_text(BSTR newText)
{
    METHOD_PROLOGUE(CAutoClickDoc, DualAClick)
    TRY_DUAL(IID_IDualAClick)
    {
        // MFC automatically converts from Unicode BSTR to
        // Ansi CString, if necessary...
        pThis->m_str = newText;
        return NOERROR;
    }
    CATCH_ALL_DUAL
}

CATCH_ALL_DUAL takes care of returning the correct error code when an exception occurs. CATCH_ALL_DUAL converts an MFC exception into OLE Automation error-handling information using the ICreateErrorInfo interface. (An example CATCH_ALL_DUAL macro is in the file MFCDUAL.H in the ACDUAL sample. The function it calls to handle exceptions, DualHandleException, is in the file MFCDUAL.CPP.) CATCH_ALL_DUAL determines the error code to return based on the type of exception that occurred:

  • COleDispatchException - In this case, HRESULT is constructed using the following code:

    hr = MAKE_HRESULT(SEVERITY_ERROR, FACILITY_ITF, (e->m_wCode + 0x200));

    This creates an HRESULT specific to the interface that caused the exception. The error code is offset by 0x200 to avoid any conflicts with system-defined HRESULTs for standard OLE interfaces.

  • CMemoryException - In this case, E_OUTOFMEMORY is returned.

  • Any other exception - In this case, E_UNEXPECTED is returned.

To indicate that the OLE Automation error handler is used, you should also implement the ISupportErrorInfo interface.

First, add code to your automation class definition to show it supports ISupportErrorInfo.

Second, add code to your automation class's interface map to associate the ISupportErrorInfo implementation class with MFC's QueryInterface mechanism. The INTERFACE_PART statement matches the class defined for ISupportErrorInfo.

Finally, implement the class defined to support ISupportErrorInfo.

(The ACDUAL sample contains three macros to help do these three steps, DECLARE_DUAL_ERRORINFO, DUAL_ERRORINFO_PART, and IMPLEMENT_DUAL_ERRORINFO, all contained in MFCDUAL.H.)

The following example implements a class defined to support ISupportErrorInfo. CAutoClickDoc is the name of your automation class and IID_IDualAClick is the IID for the interface that is the source of errors reported through the OLE Automation error object:

STDMETHODIMP_(ULONG) CAutoClickDoc::XSupportErrorInfo::AddRef()
{
    METHOD_PROLOGUE(CAutoClickDoc, SupportErrorInfo)
    return pThis->ExternalAddRef();
}

STDMETHODIMP_(ULONG) CAutoClickDoc::XSupportErrorInfo::Release()
{
    METHOD_PROLOGUE(CAutoClickDoc, SupportErrorInfo)
    return pThis->ExternalRelease();
}

STDMETHODIMP CAutoClickDoc::XSupportErrorInfo::QueryInterface(
    REFIID iid,
    LPVOID* ppvObj)
{
    METHOD_PROLOGUE(CAutoClickDoc, SupportErrorInfo)
    return pThis->ExternalQueryInterface(&iid, ppvObj);
}

STDMETHODIMP CAutoClickDoc::XSupportErrorInfo::InterfaceSupportsErrorInfo(
    REFIID iid)
{
    METHOD_PROLOGUE(CAutoClickDoc, SupportErrorInfo)
    return (iid == IID_IDualAClick) S_OK : S_FALSE;
}

See also

Technical Notes by Number
Technical Notes by Category