Muokkaa

Jaa

Execute stored procedures with a single XML parameter in SQL Server using BizTalk Server

  • Artikkeli

Executing a stored procedure that takes a single parameter is similar to executing any other stored procedure as described in Execute Stored Procedures in SQL Server using BizTalk Server. However, for the approach described in the preceding link, you need to generate metadata for the stored procedure at design time and create an orchestration to invoke the procedure at run time.

Consider a scenario where you just want to pass one single value to a stored procedure without doing any processing on that value. In such cases, you don't want the overhead of generating metadata, creating an orchestration, deploying the orchestration, and executing the operation. Rather, you can configure a WCF-Custom or WCF-SQL send port to directly invoke the stored procedure. This topic demonstrates how to perform these tasks using the BizTalk Server Administration console.

Note

This topic provides instructions on how to configure a WCF-Custom send port for executing stored procedure that takes a single parameter. You can perform the same steps by configuring a WCF-SQL port. For instructions on configuring WCF-SQL port, see Configure a Port using the WCF-SQL Adapter.

Invoke stored procedures without orchestration

To demonstrate how to execute stored procedures with single parameters without an orchestration, this topic uses the ADD_LAST_EMP_XML_INFO stored procedure. This procedure takes an XML value as a parameter and inserts it into the Address column of the Employee table. You must have the XML value that you will pass to the stored procedure. However, to execute the stored procedure using the adapter, you must send a request message conforming to the schema of the procedure, and containing the XML value for the Address field, to the SQL Server. So, you must create that request message by:

  • Using the Template option in the send port configuration using which you can create a request message using a message template.

  • Putting the XML value for the Address field into the message.

    All these steps are described in detail in this topic. You must perform the following set of tasks:

  1. Create a FILE receive port where you will drop the XML file that will be inserted into the Address XML field of the Employee table. Suppose this port is called MessageIn port.

  2. Create a WCF-Custom one-way send port that picks the XML file from the FILE receive port, constructs the message using the message template, and sends it to SQL Server to execute the stored procedure.

    This part of the topic provides instructions on configuring a WCF-Custom send port with the message template.

Note

Even though the information in this topic demonstrates how to execute a stored procedure with a single XML parameter, you can perform the tasks to perform any operation that takes a single parameter of any data type. The only difference will be in the way you create a message template for a specific operation. You can create a message template by taking the request message you would use to execute the operation using an orchestration and replacing the value of the parameter with the BizTalk message body.

Configure a WCF-Custom send port

Before creating the WCF-Custom send port, make sure you created the FILE receive port, MessageIn.

  1. Start the BizTalk Server Administration console.

  2. In the console tree, expand BizTalk Group, and then expand Applications.

  3. Expand the application under which you want to deploy the SQL adapter.

  4. Right-click Send Ports, point to New, and then point to Static One-way Send Port.

  5. In the Send Port Properties dialog box, on the General tab, type a name for the send port.

  6. Configure the port to receive all messages dropped at the FILE receive port, MessageIn.

    1. In the Send Port Properties dialog box, from the left pane, click Filters.

    2. In the right pane, under the Property column, click the grid, and then select BTS.ReceivePortName property.

    3. For the Operator column, select “==”.

    4. For the Value column, specify the name of the FILE receive port, MessageIn.

  7. In the Send Port Properties dialog box, on the General tab, from the Type drop-down list, select WCF-Custom, and then click Configure.

  8. In the WCF-Custom Transport Properties dialog box, do the following:

    1. Click the General tab, and in the Address (URI) field, specify the connection URI for SQL Server. For more information about the connection URI, see Create the SQL Server Connection URI.

    2. On the General tab, in the Action text box, type the action for the operation. See Messages and message schemas for a list of actions for each operation. For example, the action to invoke the ADD_LAST_EMP_XML_INFO is:

      Procedure/dbo/ADD_LAST_EMP_XML_INFO

    3. Click the Binding tab, and from the Binding Type list, select sqlBinding. You can specify the different binding properties exposed by the SQL adapter. For more information about binding properties, see Read about the BizTalk Adapter for SQL Server adapter Binding Properties.

    4. Click the Credentials tab, and then do one of the following:

      • Select the Do not use Single Sign-On option, and the specify the user name and password to connect to SQL Server. Note that the user name and password are case-sensitive.

        Note

        If you want to connect to SQL Server using Windows authentication, specify a blank user name and password.

      • Select the Use Single Sign-On option, and then specify an affiliate Enterprise Single Sign-on (SSO) application.

        For more information about security with respect to BizTalk Server, see Security with the SQL adapter and BizTalk Server.

    5. Click the Messages tab, and in the Outbound WCF message body section, choose the Template option.

    6. In the XML text box, specify the template that will be used to construct the WCF message. By doing so, you create a message that conforms to the ADD_LAST_EMP_XML_INFO operation for the WCF-based SQL adapter.

      Specify template for outbound WCF message

      For the ADD_LAST_EMP_XML_INFO stored procedure, you must specify the following template:

      <ADD_LAST_EMP_XML_INFO xmlns="http://schemas.microsoft.com/Sql/2008/05/Procedures/dbo">  
<xml_info>  
<bts-msg-body xmlns="http://www.microsoft.com/schemas/bts2007" encoding="string"/>  
</xml_info>  
</ADD_LAST_EMP_XML_INFO>

      Important

      The encoding in the message template must always be “string” irrespective of the type of the parameter for the operation that will be invoked using the send port. For example, the ADD_LAST_EMP_XML_INFO takes a parameter of type XML, but the encoding in the message template is string.

      Note

      You can create this message template by copying the request message for the stored procedure and replacing the value within the <xml_info> tags with the BizTalk message body. You can get the request message for the stored procedure by generating the schema for the procedure using the Consume Adapter Service Add-in, and then generating an instance of the schema to get the request XML.

    7. To return to the Send Port Properties dialog box, click OK.

  9. From the Send handler list, select BizTalkServerApplication.

  10. From the Send pipeline list, select the pipeline that corresponds to PassThruTransmit.

  11. Click OK.

Start the Application

To start the BizTalk application, you can start both the FILE receive location and the WCF-Custom send port individually. You must now copy an XML file to the folder mapped to the FILE receive location. The BizTalk application consumes the file, and the XML value is inserted in the Address column of the Employee table. You can verify this by using a SQL Server client and selecting records from the Employee table.

Using a Two-way WCF-Custom Send Port

The instructions in this topic, under the section How to Configure a WCF-Custom Send Port, demonstrate how to configure a one-way WCF-Custom send port to execute a stored procedure with a single parameter without using a BizTalk orchestration. However, in such a case, to verify whether the stored procedure is executed successfully you will have to verify in the SQL Server database whether the Address column in the Employee table is updated.

Instead, you can create a two-way WCF-Custom send port that also gets the response from SQL Server if the stored procedure is executed successfully. You must perform a few additional steps if you create a two-way WCF-Custom port. Note that you will still need a FILE receive location, as mentioned in the preceding instructions.

  1. Create a two-way WCF-Custom send port, for example, ExecProcedure. The steps to configure the send port are similar to those for the one-way send port. The only difference is that for the two-way port you must also specify a receive pipeline. Make sure you select PassThruReceive for the receive pipeline.

  2. Create a FILE send port. This port will drop the response message from the SQL Server database to a folder. Using the Filters tab of the port properties dialog box, configure the FILE send port to receive all response messages from the WCF-Custom send port.

    1. In the Send Port Properties dialog box, from the left pane, click Filters.

    2. In the right pane, under the Property column, click the grid, and then select BTS.SPName property.

    3. For the Operator column, select “==”.

    4. For the Value column, specify the name of the WCF-Custom send port, ExecProcedure.

    Start all the three ports. Copy an XML file to the folder mapped to the FILE receive location. Look for the response in the folder mapped to the FILE send port.

See Also

Develop BizTalk applications using the SQL adapter