Quickstart: Create a mesh network topology with Azure Virtual Network Manager by using the Azure CLI

Artikkeli
03/15/2024

Get started with Azure Virtual Network Manager by using the Azure CLI to manage connectivity for all your virtual networks.

In this quickstart, you deploy three virtual networks and use Azure Virtual Network Manager to create a mesh network topology. Then you verify that the connectivity configuration was applied.

Prerequisites

An Azure account with an active subscription. Create an account for free.
The latest Azure CLI, or you can use Azure Cloud Shell in the portal.
The Azure Virtual Network Manager extension. To add it, run az extension add -n virtual-network-manager.
To modify dynamic network groups, you must be granted access via Azure RBAC role assignment only. Classic Admin/legacy authorization is not supported.

To begin your configuration, sign in to your Azure account. If you use the Cloud Shell Try It feature, you're signed in automatically.

az login

Select the subscription where Virtual Network Manager is deployed:

az account set \
    --subscription "<subscription_id>"

Update the Virtual Network Manager extension for Azure CLI:

az extension update --name virtual-network-manager

Create a resource group

Before you can deploy Azure Virtual Network Manager, you have to create a resource group to host it by using az group create. This example creates a resource group named myAVNMResourceGroup in the West US location:

az group create \
    --name "myAVNMResourceGroup" \
    --location "westus"

Create a Virtual Network Manager instance

Define the scope and access type for this Virtual Network Manager instance. Create the scope by using az network manager create. Replace the value <subscription_id> with the subscription that you want Virtual Network Manager to manage virtual networks for. Replace <mgName\> with the management group that you want to manage.

az network manager create \
    --location "westus" \
    --name "myAVNM" \
    --resource-group "myAVNMResourceGroup" \
    --scope-accesses "Connectivity" "SecurityAdmin" \
    --network-manager-scopes subscriptions="/subscriptions/<subscription_id>"

Create a network group

Virtual Network Manager applies configurations to groups of virtual networks by placing them in network groups. Create a network group by using az network manager group create:

az network manager group create \
    --name "myNetworkGroup" \
    --network-manager-name "myAVNM" \
    --resource-group "myAVNMResourceGroup" \
    --description "Network Group for Production virtual networks"

Create virtual networks

Create five virtual networks by using az network vnet create. This example creates virtual networks named VNetA, VNetB, VNetC, and VNetD in the West US location. Each virtual network has a tag of networkType that's used for dynamic membership. If you already have virtual networks that you want create a mesh network with, you can skip to the next section.

az network vnet create \
    --name "VNetA" \
    --resource-group "myAVNMResourceGroup" \
    --address-prefix "10.0.0.0/16" \
    --tags "NetworkType=Prod"

az network vnet create \
    --name "VNetB" \
    --resource-group "myAVNMResourceGroup" \
    --address-prefix "10.1.0.0/16" \
    --tags "NetworkType=Prod"

az network vnet create \
    --name "VNetC" \
    --resource-group "myAVNMResourceGroup" \
    --address-prefix "10.2.0.0/16" \
    --tags "NetworkType=Prod"

az network vnet create \
    --name "VNetD" \
    --resource-group "myAVNMResourceGroup" \
    --address-prefix "10.3.0.0/16" \
    --tags "NetworkType=Test"

az network vnet create \
    --name "VNetE" \
    --resource-group "myAVNMResourceGroup" \
    --address-prefix "10.4.0.0/16" \
    --tags "NetworkType=Test"

Add a subnet to each virtual network

Complete the configuration of the virtual networks by adding a /24 subnet to each one. Create a subnet configuration named default by using az network vnet subnet create:

az network vnet subnet create \
    --name "default" \
    --resource-group "myAVNMResourceGroup" \
    --vnet-name "VNetA" \
    --address-prefix "10.0.0.0/24"

az network vnet subnet create \
    --name "default" \
    --resource-group "myAVNMResourceGroup" \
    --vnet-name "VNetB" \
    --address-prefix "10.1.0.0/24"

az network vnet subnet create \
    --name "default" \
    --resource-group "myAVNMResourceGroup" \
    --vnet-name "VNetC" \
    --address-prefix "10.2.0.0/24"

az network vnet subnet create \
    --name "default" \
    --resource-group "myAVNMResourceGroup" \
    --vnet-name "VNetD" \
    --address-prefix "10.3.0.0/24"

az network vnet subnet create \
    --name "default" \
    --resource-group "myAVNMResourceGroup" \
    --vnet-name "VNetE" \
    --address-prefix "10.4.0.0/24"

Define membership for a mesh configuration

Azure Virtual Network Manager allows two methods for adding membership to a network group. Static membership involves manually adding virtual networks, and dynamic membership involves using Azure Policy to dynamically add virtual networks based on conditions. Choose the option that you want to complete for your mesh configuration membership.

Static membership option

By using static membership, you manually add three virtual networks for your mesh configuration to your network group via az network manager group static-member create. Replace <subscription_id> with the subscription that these virtual networks were created under.

az network manager group static-member create \
    --name "VNetA" \
    --network-group "myNetworkGroup" \
    --network-manager "myAVNM" \
    --resource-group "myAVNMResourceGroup" \
    --resource-id "/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/virtualnetworks/VNetA"

az network manager group static-member create \
    --name "VNetB" \
    --network-group "myNetworkGroup" \
    --network-manager "myAVNM" \
    --resource-group "myAVNMResourceGroup" \
    --resource-id "/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/virtualnetworks/VNetB"

az network manager group static-member create \
    --name "VNetC" \
    --network-group "myNetworkGroup" \
    --network-manager "myAVNM" \
    --resource-group "myAVNMResourceGroup" \
    --resource-id "/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/virtualnetworks/VNetC"

Dynamic membership option

By using Azure Policy, you can dynamically add the three virtual networks with a networkType value of Prod to the network group. These three virtual networks will become part of the mesh configuration.

You can apply policies to a subscription or a management group, and you must always define them at or above the level where you create them. Only virtual networks within a policy scope are added to a network group.

Create a policy definition

Create a policy definition by using az policy definition create for virtual networks tagged as Prod. Replace <subscription_id> with the subscription that you want to apply this policy to. If you want to apply it to a management group, replace --subscription <subscription_id> with --management-group <mgName>.

az policy definition create \
    --name "ProdVNets" \
    --description "Choose Prod virtual networks only" \
    --rules "{\"if\":{\"allOf\":[{\"field\":\"Name\",\"contains\":\"VNet\"},{\"field\":\"tags['NetworkType']\",\"equals\":\"Prod\"}]},\"then\":{\"effect\":\"addToNetworkGroup\",\"details\":{\"networkGroupId\":\"/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/networkManagers/myAVNM/networkGroups/myNetworkGroup\"}}}" \
    --subscription <subscription_id> \
    --mode "Microsoft.Network.Data"

Apply a policy definition

After you define a policy, you must apply it by using az policy assignment create. Replace <subscription_id> with the subscription that you want to apply this policy to. If you want to apply it to a management group, replace --scope "/subscriptions/<subscription_id>" with --scope "/providers/Microsoft.Management/managementGroups/<mgName>, and replace <mgName\> with your management group.



az policy assignment create \
    --name "ProdVNets" \
    --description "Take only virtual networks tagged NetworkType:Prod" \
    --scope "/subscriptions/<subscription_id>" \
    --policy "/subscriptions/<subscription_id>/providers/Microsoft.Authorization/policyDefinitions/ProdVNets"

Create a configuration

Now that you've created the network group and given it the correct virtual networks, create a mesh network topology configuration by using az network manager connect-config create. Replace <subscription_id> with your subscription.

az network manager connect-config create \
    --configuration-name "connectivityconfig" \
    --description "Production Mesh Connectivity Config Example" \
    --applies-to-groups network-group-id="/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/networkManagers/myAVNM/networkGroups/myNetworkGroup" \
    --connectivity-topology "Mesh" \
    --network-manager-name "myAVNM" \
    --resource-group "myAVNMResourceGroup"

Commit the deployment

For the configuration to take effect, commit the configuration to the target regions by using az network manager post-commit:

az network manager post-commit \
    --network-manager-name "myAVNM" \
    --commit-type "Connectivity" \
    --configuration-ids "/subscriptions/<subscription_id>/resourceGroups/myANVMResourceGroup/providers/Microsoft.Network/networkManagers/myAVNM/connectivityConfigurations/connectivityconfig" \
    --target-locations "westus" \
    --resource-group "myAVNMResourceGroup"

Verify the configuration

Virtual networks display configurations applied to them when you use az network manager list-effective-connectivity-config:

az network manager list-effective-connectivity-config \
    --resource-group "myAVNMResourceGroup" \
    --virtual-network-name "VNetA"

az network manager list-effective-connectivity-config \
    --resource-group "myAVNMResourceGroup" \
    --virtual-network-name "VNetB"


az network manager list-effective-connectivity-config \
    --resource-group "myAVNMResourceGroup" \
    --virtual-network-name "VNetC"

az network manager list-effective-connectivity-config \
    --resource-group "myAVNMResourceGroup" \
    --virtual-network-name "VNetD"

For the virtual networks that are part of the connectivity configuration, you get an output similar to this example:

{
  "skipToken": "",
  "value": [
    {
      "appliesToGroups": [
        {
          "groupConnectivity": "None",
          "isGlobal": "False",
          "networkGroupId": "/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/networkManagers/myAVNM/networkGroups/myNetworkGroup",
          "useHubGateway": "False"
        }
      ],
      "configurationGroups": [
        {
          "description": "Network Group for Production virtual networks",
          "id": "/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/networkManagers/myAVNM/networkGroups/myNetworkGroup",
          "provisioningState": "Succeeded",
          "resourceGroup": "myAVNMResourceGroup"
        }
      ],
      "connectivityTopology": "Mesh",
      "deleteExistingPeering": "False",
      "description": "Production Mesh Connectivity Config Example",
      "hubs": [],
      "id": "/subscriptions/<subscription_id>/resourceGroups/myAVNMResourceGroup/providers/Microsoft.Network/networkManagers/myAVNM/connectivityConfigurations/connectivityconfig",
      "isGlobal": "False",
      "provisioningState": "Succeeded",
      "resourceGroup": "myAVNMResourceGroup"
    }
  ]
}

For virtual networks that aren't part of the network group, like VNetD, an output similar to this example appears:

az network manager list-effective-connectivity-config     --resource-group "myAVNMResourceGroup"     --virtual-network-name "VNetD-test"
{
  "skipToken": "",
  "value": []
}

Clean up resources

If you no longer need the Azure Virtual Network Manager instance, make sure all of the following points are true before you delete the resource:

There are no deployments of configurations to any region.
All configurations have been deleted.
All network groups have been deleted.

To delete the resource:

Remove the connectivity deployment by committing no configurations with az network manager post-commit:

az network manager post-commit \
    --network-manager-name "myAVNM" \
    --commit-type "Connectivity" \
    --target-locations "westus" \
    --resource-group "myAVNMResourceGroup"

Remove the connectivity configuration by using az network manager connect-config delete:

az network manager connect-config delete \
    --configuration-name "connectivityconfig" \
    --name "myAVNM" \
    --resource-group "myAVNMResourceGroup"

Remove the network group by using az network manager group delete:

az network manager group delete \
    --name "myNetworkGroup" \
    --network-manager-name "myAVNM" \
    --resource-group "myAVNMResourceGroup"

Delete the network manager instance by using az network manager delete:

az network manager delete \
    --name "myAVNM" \
    --resource-group "myAVNMResourceGroup"

If you no longer need the resource that you created, delete the resource group by using az group delete:
```
az group delete \
    --name "myAVNMResourceGroup"
```

Next steps

Now that you've created an Azure Virtual Network Manager instance, learn how to block network traffic by using a security admin configuration:

Block network traffic with Azure Virtual Network Manager

Jaa

Quickstart: Create a mesh network topology with Azure Virtual Network Manager by using the Azure CLI

Prerequisites

Create a resource group

Create a Virtual Network Manager instance

Create a network group

Create virtual networks

Add a subnet to each virtual network

Define membership for a mesh configuration

Static membership option

Dynamic membership option

Create a policy definition

Apply a policy definition

Create a configuration

Commit the deployment

Verify the configuration

Clean up resources

Next steps

Palaute

Lisäresursseja

Jaa

Quickstart: Create a mesh network topology with Azure Virtual Network Manager by using the Azure CLI

Prerequisites

Sign in to your Azure account and select your subscription

Create a resource group

Create a Virtual Network Manager instance

Create a network group

Create virtual networks

Add a subnet to each virtual network

Define membership for a mesh configuration

Static membership option

Dynamic membership option

Create a policy definition

Apply a policy definition

Create a configuration

Commit the deployment

Verify the configuration

Clean up resources

Next steps

Palaute

Lisäresursseja