Microsoft Sentinel solution for SAP applications data connector agent systemconfig.json file reference
The systemconfig.json file is used to configure the behavior of the Microsoft Sentinel for SAP applications data connector agent when deployed from the command line. This article describes the options available in each section of the configuration file.
Content in this article is intended for your SAP BASIS teams, and is only relevant when your data connector agent is deployed from the command line. We recommend deploying your data connector agent from the portal instead.
Important
Microsoft Sentinel solution for SAP applications uses the systemconfig.json file for agent versions released on or after June 22, 2023. For previous agent versions, you must still use the systemconfig.ini file.
Overall file structure
The following code shows the overall structure of the systemconfig.json file:
{
"<SID_GUID>": {
"secrets_source": {...},
"abap_central_instance": {...},
"azure_credentials": {...},
"file_extraction_abap": {...},
"file_extraction_java": {...},
"logs_activation_status" {...},
"connector_configuration": {...},
"abap_table_selector":: {...}
...
}
The following table describes each overall section in the systemconfig.json file:
| Section name | Description |
|---|---|
| Secrets source | Defines where credentials are stored. |
| ABAP central instance | Defines general options of the SAP instance to connect to. |
| Azure credentials | Defines credentials to connect to Azure Log Analytics. |
| File extraction ABAP | Defines logs and credentials that are extracted from ABAP servers using the SAPControl interface. |
| File extraction JAVA | Defines logs and credentials that are extracted from JAVA servers using the SAPControl interface. |
| Logs activation status | Defines which logs are extracted from ABAP. |
| Connector configuration | Defines miscellaneous connector options. |
| ABAP table selector | Defines which user master data logs get extracted from the ABAP system. |
Secrets source
Note
Remove all comments before you use this file for configuration and deployment.
"secrets_source": {
"secrets": "AZURE_KEY_VAULT|DOCKER_FIXED",
# Storage location of SAP credentials and Log Analytics workspace ID and key
# AZURE_KEY_VAULT - store in an Azure Key Vault. Requires keyvault option and intprefix option
# DOCKER_FIXED - store in systemconfig.json file. Requires user, passwd, loganalyticswsid and publickey options
"keyvault": "<vaultname>",
# Azure Keyvault name, in case secrets = AZURE_KEY_VAULT
"intprefix": "<prefix>"
# intprefix - Prefix for variables created in Azure Key Vault
},
ABAP central instance
Note
Remove all comments before you use this file for configuration and deployment.
"abap_central_instance": {
"auth_type": "PLAIN_USER_AND_PASSWORD|SNC_WITH_X509",
# Authentication type - username/password authentication, or X.509 authentication
"ashost": "<hostname>",
# FQDN, hostname, or IP address of the ABAP server
"mshost": "<hostname>",
# FQDN, hostname, or IP address of the Message server
"msserv": "<portnumber>",
# Port number, or service name (from /etc/services) of the message server
"group": "<logon group>",
# Logon group of the message server
"sysnr": "<Instance number>",
# Instance number of the ABAP server
"sysid": "<SID>",
# System ID of the ABAP server
"client": "<Client Number>",
# Client number of the ABAP server
"user": "<username>",
# Username to use to connect to ABAP server. Used only when secrets setting in Secrets Source section is set to DOCKER_FIXED
"passwd": "<password>",
# Password to use to connect to ABAP server. Used only when secrets setting in Secrets Source section is set to DOCKER_FIXED
"snc_lib": "<path to libsapcrypto>",
# Full path, to the libsapcrypto.so
# Used when SNC is in use
# !!! Note - the path must be valid within the container.
"snc_partnername": "<distinguished name of the server certificate>",
# p: -prefixed valid SAP server SNC name, which is equal to Distinguished Name(DN) of SAP server PSE
# Used when SNC is in use
"snc_qop": "<SNC protection level>",
# More information available at docs.oracle.com/cd/E19509-01/820-5064/ggrpj/index.html
# Used when SNC is in use
"snc_myname": "<distinguished name of the client certificate>",
# p: -prefixed valid client SNC name, which is equal to Distinguished Name(DN) of client PSE
# Used when SNC is in use
"x509cert": "<server certificate>"
# Base64 encoded server certificate value in a single line (with leading ----BEGIN-CERTIFICATE--- and trailing ----END-CERTIFICATE---- removed)
},
Azure credentials
Note
Remove all comments before you use this file for configuration and deployment.
"azure_credentials": {
"loganalyticswsid": "<workspace ID>",
# Log Analytics workspace ID. Used only when secrets setting in Secrets Source section is set to DOCKER_FIXED
"publickey": "<publickey>"
# Log Analytics workspace primary or secondary key. Used only when secrets setting in Secrets Source section is set to DOCKER_FIXED
},
File extraction ABAP
Note
Remove all comments before you use this file for configuration and deployment.
"file_extraction_abap": {
"osuser": "<SAPControl username>",
# Username to use to authenticate to SAPControl
"ospasswd": "<SAPControl password>",
# Password to use to authenticate to SAPControl
"appserver": "<server>",
#SAPControl server hostname/fqdn/IP address
"instance": "<instance>",
#SAPControl instance number
"abapseverity": "<severity>",
# 0 = All logs ; 1 = Warning ; 2 = Error
"abaptz": "<timezone>"
# GMT FORMAT
# example - For OS Timezone = NZST (New Zealand Standard Time) use abaptz = GMT+12
},
File extraction JAVA
Note
Remove all comments before you use this file for configuration and deployment.
"file_extraction_java": {
"javaosuser": "<username>",
# Username to use to authenticate to JAVA server
"javaospasswd": "<password>",
# Password to use to authenticate to JAVA server
"javaappserver": "<server>",
#JAVA server hostname/fqdn/IP address
"javainstance": "<instance number>",
#JAVA instance number
"javaseverity": "<severity>",
# 0 = All logs ; 1 = Warning ; 2 = Error
"javatz": "<timezone>"
# GMT FORMAT
# example - For OS Timezone = NZST (New Zealand Standard Time) use abaptz = GMT+12
},
Logs activation status
Note
Remove all comments before you use this file for configuration and deployment.
"logs_activation_status": {
# GMT FORMAT
# example - For OS Timezone = NZST (New Zealand Standard Time) use abaptz = GMT+12
"ABAPAuditLog": "<True/False>",
"ABAPJobLog": "<True/False>",
"ABAPSpoolLog": "<True/False>",
"ABAPSpoolOutputLog": "<True/False>",
"ABAPChangeDocsLog": "<True/False>",
"ABAPAppLog": "<True/False>",
"ABAPWorkflowLog": "<True/False>",
"ABAPCRLog": "<True/False>",
"ABAPTableDataLog": "<True/False>",
# The following logs are retrieved using SAP Control interface and OS Login
"ABAPFilesLogs": "<True/False>",
"SysLog": "<True/False>",
"ICM": "<True/False>",
"WP": "<True/False>",
"GW": "<True/False>",
# The following logs are retrieved using SAP Control interface and OS Login
"JAVAFilesLogs": "<True/False>",
Connector configuration
Note
Remove all comments before you use this file for configuration and deployment.
"connector_configuration": {
"extractuseremail": "<True/False>",
"apiretry": "<True/False>",
"auditlogforcexal": "<True/False>",
"auditlogforcelegacyfiles": "<True/False>",
"azure_resource_id": "<Azure _ResourceId>",
"timechunk": "<value>"
},
ABAP table selector
Note
Remove all comments before you use this file for configuration and deployment.
"abap_table_selector": {
# Specify True or False to configure whether table should be collected from the SAP system
"AGR_TCODES_FULL": "<True/False>",
"USR01_FULL": "<True/False>",
"USR02_FULL": "<True/False>",
"USR02_INCREMENTAL": "<True/False>",
"AGR_1251_FULL": "<True/False>",
"AGR_USERS_FULL": "<True/False>",
"AGR_USERS_INCREMENTAL": "<True/False>",
"AGR_PROF_FULL": "<True/False>",
"UST04_FULL": "<True/False>",
"USR21_FULL": "<True/False>",
"ADR6_FULL": "<True/False>",
"ADCP_FULL": "<True/False>",
"USR05_FULL": "<True/False>",
"USGRP_USER_FULL": "<True/False>",
"USER_ADDR_FULL": "<True/False>",
"DEVACCESS_FULL": "<True/False>",
"AGR_DEFINE_FULL": "<True/False>",
"AGR_DEFINE_INCREMENTAL": "<True/False>",
"PAHI_FULL": "<True/False>",
"PAHI_INCREMENTAL": "<True/False>",
"AGR_AGRS_FULL": "<True/False>",
"USRSTAMP_FULL": "<True/False>",
"USRSTAMP_INCREMENTAL": "<True/False>",
"SNCSYSACL_FULL": "<True/False>",
"USRACL_FULL": "<True/False>"
}
Related content
For more information, see: