Muokkaa

Jaa

Quickstart: Upload firmware images to Firmware Analysis using Azure CLI

  • Artikkeli

This article explains how to use the Azure CLI to upload firmware images to Firmware analysis.

Firmware analysis is a tool that analyzes firmware images and provides an understanding of security vulnerabilities in the firmware images.

Prerequisites

This quickstart assumes a basic understanding of Firmware analysis. For more information, see Firmware analysis for device builders. For a list of the file systems that are supported, see Frequently asked Questions about Firmware analysis.

Prepare your environment for the Azure CLI

  • Install the Azure CLI to run CLI commands locally. If you're running on Windows or macOS, consider running Azure CLI in a Docker container. For more information, see How to run the Azure CLI in a Docker container.

  • Sign in to the Azure CLI by using the az login command. Follow the steps displayed in your terminal to finish the authentication process. For other sign-in options, see Sign in with the Azure CLI.

  • When you're prompted, install the Azure CLI extension on first use. For more information about extensions, see Use extensions with the Azure CLI.

    • Install the Firmware analysis extension by running the following command: 
      az extension add --name firmwareanalysis

  • To find the version and dependent libraries that are installed, run the command az version. To upgrade to the latest version, run the command az upgrade.

  • Onboard your subscription to Firmware analysis.

  • Select the appropriate subscription ID where you'd like to upload your firmware images by running the command az account set.

Upload a firmware image to the workspace

  1. Create a firmware image to be uploaded. Insert your resource group name, subscription ID, and workspace name into the respective parameters.

    az firmwareanalysis firmware create --resource-group myResourceGroup --subscription 123e4567-e89b-12d3-a456-426614174000 --workspace-name default

The output of this command includes a name property, which is your firmware ID. Save this ID for the next command.

  1. Generate a SAS URL, which you'll use in the next step to send your firmware image to Azure Storage. Replace sampleFirmwareID with the firmware ID that you saved from the previous step. You can store the SAS URL in a variable for easier access for future commands:

    set resourceGroup=myResourceGroup
set subscription=123e4567-e89b-12d3-a456-426614174000
set workspace=default
set firmwareID=sampleFirmwareID

for /f "tokens=*" %i in ('az firmwareanalysis workspace generate-upload-url --resource-group %resourceGroup% --subscription %subscription% --workspace-name %workspace% --firmware-id %firmwareID% --query "url"') do set sasURL=%i

  2. Upload your firmware image to Azure Storage. Replace pathToFile with the path to your firmware image on your local machine.

    az storage blob upload -f "pathToFile" --blob-url %sasURL%

Here's an example workflow of how you could use these commands to create and upload a firmware image. To learn more about using variables in CLI commands, visit How to use variables in Azure CLI commands:

set filePath="/path/to/image"
set resourceGroup="myResourceGroup"
set workspace="default"

set fileName="file1"
set vendor="vendor1"
set model="model"
set version="test"

for /f "tokens=*" %i in ('az firmwareanalysis firmware create --resource-group %resourceGroup% --workspace-name %workspace% --file-name %fileName% --vendor %vendor% --model %model% --version %version% --query "name"') do set FWID=%i

for /f "tokens=*" %i in ('az firmwareanalysis workspace generate-upload-url --resource-group %resourceGroup% --workspace-name %workspace% --firmware-id %FWID% --query "url"') do set URL=%i

az storage blob upload -f %filePath% --blob-url %URL%

Retrieve firmware analysis results

To retrieve firmware analysis results, you must make sure that the status of the analysis is "Ready":

az firmwareanalysis firmware show --firmware-id sampleFirmwareID --resource-group myResourceGroup --workspace-name default

Look for the "status" field to display "Ready", then run the following commands to retrieve your firmware analysis results.

If you would like to automate the process of checking your analysis's status, you can use the az resource wait command.

The az resource wait command has a --timeout parameter, which is the time in seconds that the analysis will end if "status" does not reach "Ready" within the timeout frame. The default timeout is 3600, which is one hour. Large images may take longer to analyze, so you can set the timeout using the --timeout parameter according to your needs. Here's an example of how you can use the az resource wait command with the --timeout parameter to automate checking your analysis's status, assuming that you have already created a firmware and stored the firmware ID in a variable named $FWID:

set resourceGroup="myResourceGroup"
set workspace="default"
set FWID="yourFirmwareID"

for /f "tokens=*" %i in ('az firmwareanalysis firmware show --resource-group %resourceGroup% --workspace-name %workspace% --firmware-id %FWID% --query "id"') do set ID=%i

echo Successfully created a firmware image with the firmware ID of %FWID%, recognized in Azure by this resource ID: %ID%.

for /f "tokens=*" %i in ('az resource wait --ids %ID% --custom "properties.status=='Ready'" --timeout 10800') do set WAIT=%i

for /f "tokens=*" %i in ('az resource show --ids %ID% --query "properties.status"') do set STATUS=%i

echo Firmware analysis completed with status: %STATUS%

Once you've confirmed that your analysis status is "Ready", you can run commands to pull the results.

SBOM

The following command retrieves the SBOM in your firmware image. Replace each argument with the appropriate value for your resource group, subscription, workspace name, and firmware ID.

az firmwareanalysis firmware sbom-component --resource-group myResourceGroup --subscription 123e4567-e89b-12d3-a456-426614174000 --workspace-name default --firmware-id sampleFirmwareID

Weaknesses

The following command retrieves CVEs found in your firmware image. Replace each argument with the appropriate value for your resource group, subscription, workspace name, and firmware ID.

az firmwareanalysis firmware cve --resource-group myResourceGroup --subscription 123e4567-e89b-12d3-a456-426614174000 --workspace-name default --firmware-id sampleFirmwareID

Binary hardening

The following command retrieves analysis results on binary hardening in your firmware image. Replace each argument with the appropriate value for your resource group, subscription, workspace name, and firmware ID.

az firmwareanalysis firmware binary-hardening --resource-group myResourceGroup --subscription 123e4567-e89b-12d3-a456-426614174000 --workspace-name default --firmware-id sampleFirmwareID

Password hashes

The following command retrieves password hashes in your firmware image. Replace each argument with the appropriate value for your resource group, subscription, workspace name, and firmware ID.

az firmwareanalysis firmware password-hash --resource-group myResourceGroup --subscription 123e4567-e89b-12d3-a456-426614174000 --workspace-name default --firmware-id sampleFirmwareID

Certificates

The following command retrieves vulnerable crypto certificates that were found in your firmware image. Replace each argument with the appropriate value for your resource group, subscription, workspace name, and firmware ID.

az firmwareanalysis firmware crypto-certificate --resource-group myResourceGroup --subscription 123e4567-e89b-12d3-a456-426614174000 --workspace-name default --firmware-id sampleFirmwareID

Keys

The following command retrieves vulnerable crypto keys that were found in your firmware image. Replace each argument with the appropriate value for your resource group, subscription, workspace name, and firmware ID.

az firmwareanalysis firmware crypto-key --resource-group myResourceGroup --subscription 123e4567-e89b-12d3-a456-426614174000 --workspace-name default --firmware-id sampleFirmwareID