Muokkaa

Jaa

Configure MACsec on ExpressRoute Direct ports

  • Artikkeli

This article provides guidance on how to configure MACsec, a security protocol that protects the communication between your edge routers and Microsoft’s edge routers, using PowerShell commands.

Before you begin

Before you begin configuring MACsec, ensure that you meet the following prerequisites:

Working with Azure PowerShell

The steps and examples in this article use Azure PowerShell Az modules. To install the Az modules locally on your computer, see Install Azure PowerShell. To learn more about the new Az module, see Introducing the new Azure PowerShell Az module. PowerShell cmdlets are updated frequently. If you are not running the latest version, the values specified in the instructions may fail. To find the installed versions of PowerShell on your system, use the Get-Module -ListAvailable Az cmdlet.

You can use Azure Cloud Shell to run most PowerShell cmdlets and CLI commands, instead of installing Azure PowerShell or CLI locally. Azure Cloud Shell is a free interactive shell that has common Azure tools preinstalled and is configured to use with your account. To run any code contained in this article on Azure Cloud Shell, open a Cloud Shell session, use the Copy button on a code block to copy the code, and paste it into the Cloud Shell session with Ctrl+Shift+V on Windows and Linux, or Cmd+Shift+V on macOS. Pasted text is not automatically executed, press Enter to run code.

There are a few ways to launch the Cloud Shell:

Option Link
Click Try It in the upper right corner of a code block. Cloud Shell in this article
Open Cloud Shell in your browser. https://shell.azure.com/powershell
Click the Cloud Shell button on the menu in the upper right of the Azure portal. Cloud Shell in the portal

Sign in and select the right subscription

Follow these steps to begin the configuration:

  • Sign in to your Azure account using your credentials.

  • Choose the subscription that you want to use for this configuration.

    If you are using the Azure Cloud Shell, you sign in to your Azure account automatically after clicking 'Try it'. To sign in locally, open your PowerShell console with elevated privileges and run the cmdlet to connect.

    Connect-AzAccount

    If you have more than one subscription, get a list of your Azure subscriptions.

    Get-AzSubscription

    Specify the subscription that you want to use.

    Select-AzSubscription -SubscriptionName "Name of subscription"

Create Azure Key Vault, MACsec secrets, and user identity

  1. To store MACsec secrets securely, you need to create a Key Vault instance in a new resource group. Key Vault is a service that allows you to manage and protect cryptographic keys, certificates, and secrets in Azure. For more information, see What is Azure Key Vault?.

    New-AzResourceGroup -Name "your_resource_group" -Location "resource_location"
$keyVault = New-AzKeyVault -Name "your_key_vault_name" -ResourceGroupName "your_resource_group" -Location "resource_location" -SoftDeleteRetentionInDays 90

    You can reuse an existing Key Vault or resource group for this configuration. However, you must ensure that the [soft-delete feature] is enabled on your Key Vault. This feature allows you to recover deleted keys, secrets, and certificates within a retention period. If your Key Vault doesn't have soft-delete enabled, run the following commands to enable it:

    ($resource = Get-AzResource -ResourceId (Get-AzKeyVault -VaultName "your_existing_keyvault").ResourceId).Properties | Add-Member -MemberType "NoteProperty" -Name "enableSoftDelete" -Value "true"
Set-AzResource -ResourceId $resource.ResourceId -Properties $resource.Properties

    Note

    • ExpressRoute is a trusted service within Azure that supports Network Security policies within Azure Key Vault. For more information, see Configure Azure Key Vault Firewall and Virtual Networks.
    • You shouldn't place the Azure Key Vault behind a private endpoint, as this will prevent the communication with the ExpressRoute management plane. The ExpressRoute management plane is responsible for managing the MACsec keys and parameters for your connection.

  2. To create a new user identity, you need to use the New-AzUserAssignedIdentity cmdlet. This cmdlet creates a user-assigned managed identity in Microsoft Entra ID and registers it with the specified subscription and resource group. A user-assigned managed identity is a stand-alone Azure resource that can be assigned to any Azure service that supports managed identities. You can use this identity to authenticate and authorize access to Azure resources without storing any credentials in your code or configuration files. For more information, see What is managed identities for Azure resources?.

    $identity = New-AzUserAssignedIdentity  -Name "identity_name" -Location "resource_location" -ResourceGroupName "your_resource_group"

    To use an existing user identity, run the following command:

    $identity = Get-AzUserAssignedIdentity -ResourceGroupName "your_resource_group" -Name "identity_name"

    Install the following module in Administrator mode if PowerShell doesn't recognize New-AzUserAssignedIdentity or Get-AzUserAssignedIdentity as valid cmdlets. Then, execute the above command again.

    Install-Module -Name Az.ManagedServiceIdentity

  4. Create a connectivity association key (CAK) and a connectivity association key name (CKN) and store them in the Key Vault.

    $CAK = ConvertTo-SecureString "your_key" -AsPlainText -Force
$CKN = ConvertTo-SecureString "your_key_name" -AsPlainText -Force
$MACsecCAKSecret = Set-AzKeyVaultSecret -VaultName "your_key_vault_name" -Name "CAK_name" -SecretValue $CAK
$MACsecCKNSecret = Set-AzKeyVaultSecret -VaultName "your_key_vault_name" -Name "CKN_name" -SecretValue $CKN

    Note

    • CKN must be an even-length string up to 64 hexadecimal digits (0-9, A-F).
    • CAK length depends on cipher suite specified:
      • For GcmAes128 and GcmAesXpn128, the CAK must be an even-length string with 32 hexadecimal digits (0-9, A-F).
      • For GcmAes256 and GcmAesXpn256, the CAK must be an even-length string with 64 hexadecimal digits (0-9, A-F).
    • For CAK, the full length of the key must be used. If the key is shorter than the required length then 0's will be added to the end of the key to meet the length requirement. For example, CAK of 1234 will be 12340000... for both 128-bit and 256-bit based on the cipher.

  5. Grant the user identity the authorization to perform the GET operation.

    Set-AzKeyVaultAccessPolicy -VaultName "your_key_vault_name" -PermissionsToSecrets get -ObjectId $identity.PrincipalId

    The user identity acquired the access to retrieve the secrets, such as CAK and CKN, from the Key Vault.

  6. Configure the user identity as the designated service principal for ExpressRoute.

    $erIdentity = New-AzExpressRoutePortIdentity -UserAssignedIdentityId $identity.Id

Configure MACsec on ExpressRoute Direct ports

How to enable MACsec

Every ExpressRoute Direct instance consists of two physical ports. You can activate MACsec on both ports simultaneously or on one port individually. The latter option allows you to divert the traffic to a functioning port while maintaining the other port, which can reduce the disruption if your ExpressRoute Direct is operational.

Note

You can configure both XPN and Non-XPN ciphers:

  • GcmAes128
  • GcmAes256
  • GcmAesXpn128
  • GcmAesXpn256

The suggested best practice is to set up encryption with xpn ciphers to prevent sporadic session failures that occur with non-xpn ciphers on high speed links.

  1. Establish the MACsec secrets and cipher and link the user identity with the port to enable the ExpressRoute management code to retrieve the MACsec secrets when required.

    $erDirect = Get-AzExpressRoutePort -ResourceGroupName "your_resource_group" -Name "your_direct_port_name"
$erDirect.Links[0]. MacSecConfig.CknSecretIdentifier = $MacSecCKNSecret.Id
$erDirect.Links[0]. MacSecConfig.CakSecretIdentifier = $MacSecCAKSecret.Id
$erDirect.Links[0]. MacSecConfig.Cipher = "GcmAes256"
$erDirect.Links[1]. MacSecConfig.CknSecretIdentifier = $MacSecCKNSecret.Id
$erDirect.Links[1]. MacSecConfig.CakSecretIdentifier = $MacSecCAKSecret.Id
$erDirect.Links[1]. MacSecConfig.Cipher = "GcmAes256"
$erDirect.identity = $erIdentity
Set-AzExpressRoutePort -ExpressRoutePort $erDirect

  2. (Optional) If the ports are in Administrative Down state you can run the following commands to bring up the ports.

    $erDirect = Get-AzExpressRoutePort -ResourceGroupName "your_resource_group" -Name "your_direct_port_name"
$erDirect.Links[0].AdminState = "Enabled"
$erDirect.Links[1].AdminState = "Enabled"
Set-AzExpressRoutePort -ExpressRoutePort $erDirect

    MACsec is now enabled on the ExpressRoute Direct ports on Microsoft side. If you didn't configure it on your edge devices, you can proceed to configure them with the same MACsec secrets and cipher.

  3. (Optional) To activate the ports that are in Administrative Down state, run the following commands:

    $erDirect = Get-AzExpressRoutePort -ResourceGroupName "your_resource_group" -Name "your_direct_port_name"
$erDirect.Links[0].MacSecConfig.SciState = "Enabled"
$erDirect.Links[1].MacSecConfig.SciState = "Enabled"
Set-AzExpressRoutePort -ExpressRoutePort $erDirect

    SCI is now enabled on the ExpressRoute Direct ports.

How to disable MACsec

To deactivate MACsec on your ExpressRoute Direct instance, run the following commands:

$erDirect = Get-AzExpressRoutePort -ResourceGroupName "your_resource_group" -Name "your_direct_port_name"
$erDirect.Links[0]. MacSecConfig.CknSecretIdentifier = $null
$erDirect.Links[0]. MacSecConfig.CakSecretIdentifier = $null
$erDirect.Links[1]. MacSecConfig.CknSecretIdentifier = $null
$erDirect.Links[1]. MacSecConfig.CakSecretIdentifier = $null
$erDirect.identity = $null
Set-AzExpressRoutePort -ExpressRoutePort $erDirect

MACsec is now disabled on the ExpressRoute Direct ports on the Microsoft side.

Test connectivity

Once you set up MACsec (including MACsec key update) on your ExpressRoute Direct ports, verify the status of the BGP sessions of the circuits. If you haven't create a circuit on the ports yet, do so first and establish Azure Private Peering or Microsoft Peering of the circuit. Incorrect MACsec configuration, such as a MACsec key mismatch between your network devices and Microsoft’s network devices, prevents you from observing ARP resolution at layer 2 or BGP establishment at layer 3. If everything is configured correctly, you'll see the BGP routes advertised correctly in both directions and your application data flow accordingly over ExpressRoute.

Next steps