Jaa

Remove unused data files with vacuum

  • Artikkeli

Predictive optimization automatically runs VACUUM on Unity Catalog managed tables. Databricks recommends enabling predictive optimizations for all Unity Catalog managed tables to simplify data maintenance and reduce storage costs. See Predictive optimization for Unity Catalog managed tables.

You can remove data files no longer referenced by a Delta table that are older than the retention threshold by running the VACUUM command on the table. Running VACUUM regularly is important for cost and compliance because of the following considerations:

  • Deleting unused data files reduces cloud storage costs.
  • Data files removed by VACUUM might contain records that have been modified or deleted. Permanently removing these files from cloud storage ensures these records are no longer accessible.

Caveats for vacuum

The default retention threshold for data files after running VACUUM is 7 days. To change this behavior, see Configure data retention for time travel queries.

VACUUM might leave behind empty directories after removing all files from within them. Subsequent VACUUM operations delete these empty directories.

Databricks recommends using predictive optimization to automatically run VACUUM for Delta tables. See Predictive optimization for Unity Catalog managed tables.

Some Delta Lake features use metadata files to mark data as deleted rather than rewriting data files. You can use REORG TABLE ... APPLY (PURGE) to commit these deletions and rewrite data files. See Purge metadata-only deletes to force data rewrite.

Important

  • In Databricks Runtime 13.3 LTS and above, VACUUM semantics for shallow clones with Unity Catalog managed tables differ from other Delta tables. See Vacuum and Unity Catalog shallow clones.
  • VACUUM removes all files from directories not managed by Delta Lake, ignoring directories beginning with _ or .. If you are storing additional metadata like Structured Streaming checkpoints within a Delta table directory, use a directory name such as _checkpoints.
  • The ability to query table versions older than the retention period is lost after running VACUUM.
  • Log files are deleted automatically and asynchronously after checkpoint operations and are not governed by VACUUM. While the default retention period of log files is 30 days, running VACUUM on a table removes the data files necessary for time travel.

Note

When disk caching is enabled, a cluster might contain data from Parquet files that have been deleted with VACUUM. Therefore, it may be possible to query the data of previous table versions whose files have been deleted. Restarting the cluster will remove the cached data. See Configure the disk cache.

Example syntax for vacuum

VACUUM table_name   -- vacuum files not required by versions older than the default retention period

VACUUM table_name RETAIN 100 HOURS  -- vacuum files not required by versions more than 100 hours old

VACUUM table_name DRY RUN    -- do dry run to get the list of files to be deleted

For Spark SQL syntax details, see VACUUM.

See the Delta Lake API documentation for Scala, Java, and Python syntax details.

Note

Use the RETAIN keyword to specify the threshold used to determine if a data file should be removed. The VACUUM command uses this threshold to look back in time the specified amount of time and identify the most recent table version at that moment. Delta retains all data files required to query that table version and all newer table versions. This setting interacts with other table properties. See Configure data retention for time travel queries.

Full vs. lite mode

Important

This feature is in Public Preview in Databricks Runtime 16.1 and above.

You can specify the LITE keyword in your vacuum statement to trigger an alternatve mode of VACUUM that avoids listing all files in the table directory.

LITE mode uses the Delta transaction log to identify data files that are no longer within the VACUUM retention threshold and removes these data files from the table. LITE mode is especially useful for large tables that require frequent VACUUM operations, as it avoids needing to list all files to identify those data files to remove.

Note

Running VACUUM in LITE mode will not delete any files that are not referenced in the transaction log. For example, files that were created by an aborted transaction.

Use the following syntax to VACUUM in LITE mode:

VACUUM table_name LITE

LITE mode has the following requirement:

  • You must have run at least one successful VACUUM operation within the configured transaction log retention threshold (30 days by default).

If this requirement isn’t met, when you try to run VACUUM in LITE mode, the following error message displays. To continue, you must run VACUUM in FULL mode.

VACUUM <tableName> LITE cannot delete all eligible files as some files are not referenced by the Delta log. Please run VACUUM FULL.

FULL mode is the default for vacuum. You can explicitly run full mode with the following command:

VACUUM table_name FULL

See VACUUM.

Purge metadata-only deletes to force data rewrite

The REORG TABLE command provides the APPLY (PURGE) syntax to rewrite data to apply soft-deletes. Soft-deletes do not rewrite data or delete data files, but rather use metadata files to indicate that some data values have changed. See REORG TABLE.

Operations that create soft-deletes in Delta Lake include the following:

  • Dropping columns with column mapping enabled.
  • Deleting rows with deletion vectors enabled.
  • Any data modifications on Photon-enabled clusters when deletion vectors are enabled.

With soft-deletes enabled, old data may remain physically present in the table’s current files even after the data has been deleted or updated. To remove this data physically from the table, complete the following steps:

  1. Run REORG TABLE ... APPLY (PURGE). After doing this, the old data is no longer present in the table’s current files, but it is still present in the older files that are used for time travel.
  2. Run VACUUM to delete these older files.

REORG TABLE creates a new version of the table as the operation completes. All table versions in the history prior to this transaction refer to older data files. Conceptually, this is similar to the OPTIMIZE command, where data files are rewritten even though data in the current table version stays consistent.

Important

Data files are only deleted when the files have expired according to the VACUUM retention period. This means that the VACUUM must be done with a delay after the REORG so that the older files have expired. The retention period of VACUUM can be reduced to shorten the required waiting time, at the cost of reducing the maximum history that is retained.

What size cluster does vacuum need?

To select the correct cluster size for VACUUM, it helps to understand that the operation occurs in two phases:

  1. The job begins by using all available executor nodes to list files in the source directory in parallel. This list is compared to all files currently referenced in the Delta transaction log to identify files to be deleted. The driver sits idle during this time.
  2. The driver then issues deletion commands for each file to be deleted. File deletion is a driver-only operation, meaning that all operations occur in a single node while the worker nodes sit idle.

To optimize cost and performance, Databricks recommends the following, especially for long-running vacuum jobs:

  • Run vacuum on a cluster with auto-scaling set for 1-4 workers, where each worker has 8 cores.
  • Select a driver with between 8 and 32 cores. Increase the size of the driver to avoid out-of-memory (OOM) errors.

If VACUUM operations are regularly deleting more than 10 thousand files or taking over 30 minutes of processing time, you might want to increase either the size of the driver or the number of workers.

If you find that the slowdown occurs while identifying files to be removed, add more worker nodes. If the slowdown occurs while delete commands are running, try increasing the size of the driver.

How frequently should you run vacuum?

Databricks recommends regularly running VACUUM on all tables to reduce excess cloud data storage costs. The default retention threshold for vacuum is 7 days. Setting a higher threshold gives you access to a greater history for your table, but increases the number of data files stored and, as a result, incurs greater storage costs from your cloud provider.

Why can’t you vacuum a Delta table with a low retention threshold?

Warning

It is recommended that you set a retention interval to be at least 7 days, because old snapshots and uncommitted files can still be in use by concurrent readers or writers to the table. If VACUUM cleans up active files, concurrent readers can fail or, worse, tables can be corrupted when VACUUM deletes files that have not yet been committed. You must choose an interval that is longer than the longest running concurrent transaction and the longest period that any stream can lag behind the most recent update to the table.

Delta Lake has a safety check to prevent you from running a dangerous VACUUM command. If you are certain that there are no operations being performed on this table that take longer than the retention interval you plan to specify, you can turn off this safety check by setting the Spark configuration property spark.databricks.delta.retentionDurationCheck.enabled to false.

Audit information

VACUUM commits to the Delta transaction log contain audit information. You can query the audit events using DESCRIBE HISTORY.