Muokkaa

Jaa


Set up sign-up and sign-in with generic OpenID Connect using Azure Active Directory B2C

Before you begin, use the Choose a policy type selector at the top of this page to choose the type of policy you’re setting up. Azure Active Directory B2C offers two methods to define how users interact with your applications: through predefined user flows or through fully configurable custom policies. The steps required in this article are different for each method.

OpenID Connect is an authentication protocol built on top of OAuth 2.0 that can be used for secure user sign-in. Most identity providers that use this protocol are supported in Azure AD B2C.

This article explains how you can add custom OpenID Connect identity providers into your user flows.

Important

Your endpoints must comply with the Azure AD B2C security requirements. Older TLS versions and ciphers are deprecated. For more information, see Azure AD B2C TLS and cipher suite requirements.

Prerequisites

Add the identity provider

  1. Sign in to the Azure portal as the global administrator of your Azure AD B2C tenant.
  2. If you have access to multiple tenants, select the Settings icon in the top menu to switch to your Azure AD B2C tenant from the Directories + subscriptions menu.
  3. Choose All services in the top-left corner of the Azure portal, search for and select Azure AD B2C.
  4. Select Identity providers, and then select New OpenID Connect provider.
  5. Enter a Name. For example, enter Contoso.

Define the OpenId Connect identity provider by adding it to the ClaimsProviders element in the extension file of your policy.

  1. Open the TrustFrameworkExtensions.xml.

  2. Find the ClaimsProviders element. If it does not exist, add it under the root element.

  3. Add a new ClaimsProvider as follows:

    <ClaimsProvider>
      <Domain>contoso.com</Domain>
      <DisplayName>Login with Contoso</DisplayName>
      <TechnicalProfiles>
        <TechnicalProfile Id="Contoso-OpenIdConnect">
          <DisplayName>Contoso</DisplayName>
          <Description>Login with your Contoso account</Description>
          <Protocol Name="OpenIdConnect"/>
          <Metadata>
            <Item Key="METADATA">https://your-identity-provider.com/.well-known/openid-configuration</Item>
            <Item Key="client_id">00001111-aaaa-2222-bbbb-3333cccc4444</Item>
            <Item Key="response_types">code</Item>
            <Item Key="scope">openid profile</Item>
            <Item Key="response_mode">form_post</Item>
            <Item Key="HttpBinding">POST</Item>
            <Item Key="UsePolicyInRedirectUri">false</Item>
          </Metadata>
          <!-- <CryptographicKeys>
            <Key Id="client_secret" StorageReferenceId="B2C_1A_ContosoSecret"/>
          </CryptographicKeys> -->
          <OutputClaims>
            <OutputClaim ClaimTypeReferenceId="issuerUserId" PartnerClaimType="oid"/>
            <OutputClaim ClaimTypeReferenceId="tenantId" PartnerClaimType="tid"/>
            <OutputClaim ClaimTypeReferenceId="givenName" PartnerClaimType="given_name" />
            <OutputClaim ClaimTypeReferenceId="surName" PartnerClaimType="family_name" />
            <OutputClaim ClaimTypeReferenceId="displayName" PartnerClaimType="name" />
            <OutputClaim ClaimTypeReferenceId="email" PartnerClaimType="email" />
            <OutputClaim ClaimTypeReferenceId="authenticationSource" DefaultValue="socialIdpAuthentication" AlwaysUseDefaultValue="true" />
            <OutputClaim ClaimTypeReferenceId="identityProvider" PartnerClaimType="iss" />
            <OutputClaim ClaimTypeReferenceId="objectId" PartnerClaimType="oid"/>
          </OutputClaims>
          <OutputClaimsTransformations>
            <OutputClaimsTransformation ReferenceId="CreateRandomUPNUserName"/>
            <OutputClaimsTransformation ReferenceId="CreateUserPrincipalName"/>
            <OutputClaimsTransformation ReferenceId="CreateAlternativeSecurityId"/>
            <OutputClaimsTransformation ReferenceId="CreateSubjectClaimFromAlternativeSecurityId"/>
          </OutputClaimsTransformations>
          <UseTechnicalProfileForSessionManagement ReferenceId="SM-SocialLogin"/>
        </TechnicalProfile>
      </TechnicalProfiles>
    </ClaimsProvider>
    

Configure the identity provider

Every OpenID Connect identity provider describes a metadata document that contains most of the information required to perform sign-in. The metadata document includes information such as the URLs to use and the location of the service's public signing keys. The OpenID Connect metadata document is always located at an endpoint that ends in .well-known/openid-configuration. For the OpenID Connect identity provider you are looking to add, enter its metadata URL.

In the Metadata url, enter the URL of the OpenID Connect metadata document.

In the <Item Key="METADATA"> technical profile metadata, enter the URL of the OpenID Connect metadata document.

Client ID and secret

To allow users to sign in, the identity provider requires developers to register an application in their service. This application has an ID that is referred to as the client ID and a client secret.

The client secret is optional. However, you must provide a client secret if the Response type is code, which uses the secret to exchange the code for the token.

To add the client ID and client secret, copy these values from the identity provider and enter them into the corresponding fields.

In the <Item Key="client_id"> technical profile metadata, enter the client ID.

Create a policy key

If client secret is required, store the client secret that you previously recorded in your Azure AD B2C tenant.

  1. Sign in to the Azure portal.

  2. Make sure you're using the directory that contains your Azure AD B2C tenant. Select the Directory + subscription filter in the portal toolbar.

  3. On the Portal settings | Directories + subscriptions page, find your Azure AD B2C directory in the Directory name list, and then select Switch.

  4. Choose All services in the top-left corner of the Azure portal, and then search for and select Azure AD B2C.

  5. On the Overview page, select Identity Experience Framework.

  6. Select Policy Keys and then select Add.

  7. For Options, choose Manual.

  8. Enter a Name for the policy key. For example, ContosoSecret. The prefix B2C_1A_ is added automatically to the name of your key.

  9. In Secret, enter your client secret that you previously recorded.

  10. For Key usage, select Signature.

  11. Click Create.

  12. In the CryptographicKeys XML element, add the following element:

    <CryptographicKeys>
      <Key Id="client_secret" StorageReferenceId="B2C_1A_ContosoSecret"/>
    </CryptographicKeys>
    

Scope

Scope defines the information and permissions you are looking to gather from your identity provider, for example openid profile. In order to receive the ID token from the identity provider, the openid scope must be specified.

Without the ID token, users are not able to sign in to Azure AD B2C using the custom identity provider. Other scopes can be appended separated by space. Refer to the custom identity provider's documentation to see what other scopes may be available.

In the Scope, enter the scopes from the identity provider. For example, openid profile.

In the <Item Key="scope"> technical profile metadata, enter the scopes from the identity provider. For example, openid profile.

Response type

The response type describes what kind of information is sent back in the initial call to the authorization_endpoint of the custom identity provider. The following response types can be used:

  • code: As per the authorization code flow, a code will be returned back to Azure AD B2C. Azure AD B2C proceeds to call the token_endpoint to exchange the code for the token.
  • id_token: An ID token is returned back to Azure AD B2C from the custom identity provider.

In the Response type, select code, or id_token, according to your identity provider settings.

In the <Item Key="response_types"> technical profile metadata, select code, or id_token according to your identity provider settings.

Response mode

The response mode defines the method that should be used to send the data back from the custom identity provider to Azure AD B2C. The following response modes can be used:

  • form_post: This response mode is recommended for best security. The response is transmitted via the HTTP POST method, with the code or token being encoded in the body using the application/x-www-form-urlencoded format.
  • query: The code or token is returned as a query parameter.

In the Response mode, select form_post, or query, according to your identity provider settings.

In the <Item Key="response_mode"> technical profile metadata, select form_post, or query, according to your identity provider settings.

Domain hint

The domain hint can be used to skip directly to the sign in page of the specified identity provider, instead of having the user make a selection among the list of available identity providers.

To allow this kind of behavior, enter a value for the domain hint. To jump to the custom identity provider, append the parameter domain_hint=<domain hint value> to the end of your request when calling Azure AD B2C for sign in.

In the Domain hint, enter a domain name used in the domain hint.

In the <Domain>contoso.com</Domain> technical profile XML element, enter a domain name used in the domain hint. For example, contoso.com.

Claims mapping

After the custom identity provider sends an ID token back to Azure AD B2C, Azure AD B2C needs to be able to map the claims from the received token to the claims that Azure AD B2C recognizes and uses. For each of the following mappings, refer to the documentation of the custom identity provider to understand the claims that are returned back in the identity provider's tokens:

  • User ID: Enter the claim that provides the unique identifier for the signed-in user.
  • Display Name: Enter the claim that provides the display name or full name for the user.
  • Given Name: Enter the claim that provides the first name of the user.
  • Surname: Enter the claim that provides the last name of the user.
  • Email: Enter the claim that provides the email address of the user.

The OutputClaims element contains a list of claims returned by your identity provider. Map the name of the claim defined in your policy to the name defined in the identity provider. Under the <OutputClaims> element, configure the PartnerClaimType attribute with the corresponding claim name as defined by your identity provider.

ClaimTypeReferenceId PartnerClaimType
issuerUserId Enter the claim that provides the unique identifier for the signed-in user.
displayName Enter the claim that provides the display name or full name for the user.
givenName Enter the claim that provides the first name of the user.
surName Enter the claim that provides the last name of the user.
email Enter the claim that provides the email address of the user.
identityProvider Enter the claim that provides the token issuer name. For example, iss. If the identity provider doesn't include the issuer claim in the token, set the DefaultValue attribute with a unique identifier of your identity provider. For example, DefaultValue="contoso.com".

Add the identity provider to a user flow

  1. In your Azure AD B2C tenant, select User flows.
  2. Click the user flow that you want to add the identity provider.
  3. Under the Social identity providers, select the identity provider you added. For example, Contoso.
  4. Select Save.

Test your user flow

  1. To test your policy, select Run user flow.
  2. For Application, select the web application named testapp1 that you previously registered. The Reply URL should show https://jwt.ms.
  3. Select the Run user flow button.
  4. From the sign-up or sign-in page, select the identity provider you want to sign-in. For example, Contoso.

If the sign-in process is successful, your browser is redirected to https://jwt.ms, which displays the contents of the token returned by Azure AD B2C.

Add a user journey

At this point, the identity provider has been set up, but it's not yet available in any of the sign-in pages. If you don't have your own custom user journey, create a duplicate of an existing template user journey, otherwise continue to the next step.

  1. Open the TrustFrameworkBase.xml file from the starter pack.
  2. Find and copy the entire contents of the UserJourney element that includes Id="SignUpOrSignIn".
  3. Open the TrustFrameworkExtensions.xml and find the UserJourneys element. If the element doesn't exist, add one.
  4. Paste the entire content of the UserJourney element that you copied as a child of the UserJourneys element.
  5. Rename the Id of the user journey. For example, Id="CustomSignUpSignIn".

Add the identity provider to a user journey

Now that you have a user journey, add the new identity provider to the user journey. You first add a sign-in button, then link the button to an action. The action is the technical profile you created earlier.

  1. Find the orchestration step element that includes Type="CombinedSignInAndSignUp", or Type="ClaimsProviderSelection" in the user journey. It's usually the first orchestration step. The ClaimsProviderSelections element contains a list of identity providers that a user can sign in with. The order of the elements controls the order of the sign-in buttons presented to the user. Add a ClaimsProviderSelection XML element. Set the value of TargetClaimsExchangeId to a friendly name.

  2. In the next orchestration step, add a ClaimsExchange element. Set the Id to the value of the target claims exchange Id. Update the value of TechnicalProfileReferenceId to the Id of the technical profile you created earlier.

The following XML demonstrates the first two orchestration steps of a user journey with the identity provider:

<OrchestrationStep Order="1" Type="CombinedSignInAndSignUp" ContentDefinitionReferenceId="api.signuporsignin">
  <ClaimsProviderSelections>
    ...
    <ClaimsProviderSelection TargetClaimsExchangeId="ContosoExchange" />
  </ClaimsProviderSelections>
  ...
</OrchestrationStep>

<OrchestrationStep Order="2" Type="ClaimsExchange">
  ...
  <ClaimsExchanges>
    <ClaimsExchange Id="ContosoExchange" TechnicalProfileReferenceId="Contoso-OpenIdConnect" />
  </ClaimsExchanges>
</OrchestrationStep>

Configure the relying party policy

The relying party policy, for example SignUpSignIn.xml, specifies the user journey which Azure AD B2C will execute. Find the DefaultUserJourney element within relying party. Update the ReferenceId to match the user journey ID, in which you added the identity provider.

In the following example, for the CustomSignUpSignIn user journey, the ReferenceId is set to CustomSignUpSignIn:

<RelyingParty>
  <DefaultUserJourney ReferenceId="CustomSignUpSignIn" />
  ...
</RelyingParty>

Upload the custom policy

  1. Sign in to the Azure portal.
  2. Select the Directory + Subscription icon in the portal toolbar, and then select the directory that contains your Azure AD B2C tenant.
  3. In the Azure portal, search for and select Azure AD B2C.
  4. Under Policies, select Identity Experience Framework.
  5. Select Upload Custom Policy, and then upload the two policy files that you changed, in the following order: the extension policy, for example TrustFrameworkExtensions.xml, then the relying party policy, such as SignUpSignIn.xml.
  1. Select your relying party policy, for example B2C_1A_signup_signin.
  2. For Application, select a web application that you previously registered. The Reply URL should show https://jwt.ms.
  3. Select the Run now button.
  4. From the sign-up or sign-in page, select Contoso to sign in with Google account.

If the sign-in process is successful, your browser is redirected to https://jwt.ms, which displays the contents of the token returned by Azure AD B2C.

Known Issues

  • Azure AD B2C does not support JWE (JSON Web Encryption) for exchanging encrypted tokens with OpenID connect identity providers.

Next steps

Find more information see the OpenId Connect technical profile reference guide.