Windows Autopilot device preparation - known issues
This article describes known issues that can often be resolved with:
- Configuration changes.
- Cumulative updates.
- Might be resolved automatically in a future release.
Tip
RSS can be used to notify when new known issues are added to this page. For example, the following RSS link includes this article:
https://learn.microsoft.com/api/search/rss?search=%22Information+regarding+known+issues+that+might+occur+during+a+Windows+Autopilot+device+preparation%22&locale=en-us&%24filter=
This example includes the &locale=en-us variable. The locale variable is required, but it can be changed to another supported locale. For example, &locale=es-es.
For more information on using RSS for notifications, see How to use the docs in the Intune documentation.
Known issues
Apps and scripts tabs don't display properly when editing the Windows Autopilot device preparation profile
Date added: December 18, 2024
During the editing flow of the Windows Autopilot device preparation policy, there's a known issue when displaying the Applications and Scripts tabs where the tabs might display incorrect information. For example, under the Scripts tab, a list of applications might be shown instead of a list of scripts. The issue is impacting only the view in Microsoft Intune and not the configuration being applied to the device. The issue is being investigated.
As a workaround, select the table header Allowed Applications or Allowed Scripts to reload the table's contents.
Win32 and WinGet applications are skipped when Managed installer policy is enabled for the tenant
Date added: October 10, 2024
Date updated: November 15, 2024
When the Managed installer policy is Active for a tenant, Win32 apps and Microsoft Store apps aren't delivered during OOBE. The apps are instead installed after the device gets to the Desktop and the Managed installer policy is delivered. The Windows Autopilot device preparation deployment status report reports the apps as Skipped.
For more information, see Known issue: Windows Autopilot device preparation with Win32 apps and managed installer policy.
Security group membership update failures might lead to non-compliant devices
Date added: September 27, 2024
If security groups aren't properly configured in Microsoft Intune, devices might lose compliance and be left in an unsecured state. The following are potential reasons for security group membership failures:
Retry failures: Security group membership updates might not succeed during retry windows, leading to delays in group updates.
Static to dynamic group changes: After the Windows Autopilot device preparation profiles are configured, changing a security group from static to dynamic could cause failures.
Owner removal: If the Intune Provisioning Client service principal is removed as an owner of a configured security group, updates might fail.
Group deletion: If a configured security group is deleted and devices are deployed before Microsoft Intune detects the deletion, security configurations might fail to apply.
To mitigate the issue, follow these steps:
Validate security group configuration before provisioning:
- Ensure the correct security group is selected within the Microsoft Intune admin center or the Microsoft Entra admin center.
- The security group should be configured within the Windows Autopilot device preparation profile.
- The group shouldn't be assignable to other groups.
- The Intune Provisioning Client service principal should be an owner of the group.
Manually fix the provisioned devices:
- If devices are already deployed or the security group isn't applicable, manually add the affected devices to the correct security group.
Security group membership failures can be prevented by following these steps, ensuring devices remain compliant and secure.
Deployment fails for devices not in the Coordinated Universal Time (UTC) time zone
Date added: July 8, 2024
Date updated: July 23, 2024
Autopilot device preparation deployments fail when devices aren't in the UTC time zone. The issue is being investigated.
As a workaround, customers can manually set the time zone in OOBE via Windows PowerShell until the issue is resolved:
Set-TimeZone -Id "UTC"
This issue was resolved in July 2024.
BitLocker encryption defaults to 128-bit when 256-bit encryption is configured
Date added: July 8, 2024
In some Windows Autopilot device preparation deployments, BitLocker encryption may default to 128-bit even though the admin configured 256-bit encryption due to a known race condition. The issue is being investigated. Microsoft recommends that customers who need 256-bit BitLocker encryption wait for the issue to be resolved before trying to use Windows Autopilot device preparation.
Windows Autopilot device preparation policy shows 0 groups assigned
Date added: June 18, 2024
Date updated: July 23, 2024
There's a known issue that the Windows Autopilot device preparation policy shows 0 groups assigned even when:
- An assigned device security group was properly added to the policy.
- The Intune Provisioning Client service principal with AppID of f1346770-5b25-470b-88bd-d5744ab7952c is the owner of the device security group specified in the policy.
The issue is being investigated. As a workaround, create a new assigned device security group with the Intune Provisioning Client service principal with AppID of f1346770-5b25-470b-88bd-d5744ab7952c as the owner, and then assign the new device group to the Windows Autopilot device preparation policy. For more information on creating the assigned device group, see Create a device group.
This issue was resolved in July 2024.
Unable to assign Windows Autopilot device preparation policy to user group
Date added: June 18, 2024
Date updated: July 23, 2024
There's a known issue where an administrator might not be able to assign the Windows Autopilot device preparation policy to a user group. When the issue occurs, the following error might occur:
Unable to save group assignment for <policy_name>. You do not have permission to save these assignments.
The issue is being investigated. As a workaround, add the following additional role-based access control (RBAC) permission for the Windows Autopilot device preparation administrator role:
- Device configurations
- Assign
For more information, see Required RBAC permissions.
Note
The Required RBAC permissions article doesn't list the Device configurations - Assign permission. This permission requirement is only temporary until the issue is resolved. However, the article can be used as a guide on how to properly add this permission. This issue was resolved in July 2024.
Device is stuck at 100% during the out-of-box experience (OOBE)
Date added: June 3, 2024
If during Windows Autopilot device preparation deployment a device gets stuck at 100% during the out-of-box experience (OOBE), the end-user needs to manually restart the device for the deployment to continue. This issue is a known issue and a fix is being worked on.
Object with AppID of f1346770-5b25-470b-88bd-d5744ab7952c displays as Intune Autopilot ConfidentialClient
Date added: June 3, 2024
In some tenants, when trying to set the owner of the device group used in the Windows Autopilot device preparation policy, the service principal with AppID of f1346770-5b25-470b-88bd-d5744ab7952c displays as Intune Autopilot ConfidentialClient instead of Intune Provisioning Client. As long as the service principal has an AppID of f1346770-5b25-470b-88bd-d5744ab7952c, it's the correct service principal and can be selected.
Conflict between Microsoft Entra ID and Windows Autopilot device preparation local administrator setting
Date added: June 3, 2024
There's a compatibility problem between the Windows Autopilot device preparation policy User account type setting and the Microsoft Entra ID Local administrator settings. Specifically, when the Windows Autopilot device preparation policy User account type setting is set to Standard user and the Microsoft Entra ID setting Registering user is added as local administrator on the device during Microsoft Entra join (Preview) under Local administrator settings is set to either Selected or None, provisioning gets skipped during a Windows Autopilot device preparation deployment. This settings conflict leads to a scenario where users could reach the desktop without having the expected applications installed. The Microsoft Entra ID Local administrator settings can be found by signing into the Azure portal and navigating to Microsoft Entra ID > Manage | Devices > Manage | Devices settings.
Until the issue is fixed, for users to be standard non-administrators on their device, make sure that the settings are set to one of the following three setting combinations:
Standard user option 1
- The Microsoft Entra ID Local administrator settings is set to None.
- The Windows Autopilot device preparation policy User account type setting is set to Administrator.
Standard user option 2
- The Microsoft Entra ID Local administrator settings is set to Selected and the standard non-administrator users aren't selected.
- The Windows Autopilot device preparation policy User account type setting is set to Administrator.
Standard user option 3
- The Microsoft Entra ID Local administrator settings is set to All.
- The Windows Autopilot device preparation policy User account type is set to Standard user.
In all three cases, the end result is that the user is a standard non-administrative user on the device.
If the intention is for the user to be a local administrator user on the device, make sure that the settings are set to one of the following two setting combinations:
Administrator user option 1
- The Microsoft Entra ID Local administrator settings is set to All.
- The Windows Autopilot device preparation policy User account type setting is set to Administrator.
Administrator user option 2
- The Microsoft Entra ID Local administrator settings is set to Selected and the administrator users are selected.
- The Windows Autopilot device preparation policy User account type setting is set to Administrator.
Initial release of Windows Autopilot device preparation
Date added: June 3, 2024
The initial release of Windows Autopilot device preparation has the following known issues and limitations:
- Dependency and supersedence relationships are marked in reports as Dependent.
- Application uninstall intent is marked in reports as Installed if completed successfully.
- Managed Installer policy during the out-of-box experience (OOBE) isn't supported due to the possibility of incorrect reporting.
- Custom compliance isn't supported during Windows Autopilot device preparation deployments.
- The device health script isn't supported during Windows Autopilot device preparation deployments.