How to embed manifest inside C/C++ binary using makefiles

Artikkeli
06/05/2005

Here is an unofficial preview of sample that is going to be available soon on MSDN. As always, standard disclosure that this post is provided "AS IS" with no warranties, and confer no rights and use of this sample is subject to the terms specified at https://www.microsoft.com/info/cpyright.htm

It is recommended for C/C++ applications to have manifest embedded inside the final binary because this ensures proper runtime behavior in most of scenarios. Visual Studio by default tries to embed manifest when building project from source files, see my post on how manifest is generated in visual studio for more details. However if an application is built using nmake build utility, some changes to existing makefile are necessary. In this section it is demonstrated how to change existing makefiles to automatically embed manifest inside final binary.

First let’s take a look on MyApplication.exe, which is a simple application built from one file using a nmake script as the following:

 !if "$(DEBUG)" == "1"

 CPPFLAGS=$(CPPFLAGS) /MDd

 LFLAGS=$(LFLAGS) /INCREMENTAL

 !else

 CPPFLAGS=$(CPPFLAGS) /MD

 !endif

 MyApplication.exe : MyApplication.obj

           link $** /out:$@ $(LFLAGS)

 MyApplication.obj : MyApplication.cpp

 clean :

           del MyApplication.obj MyApplication.exe

If this script is run unchanged with Visual C++ 2005, it successfully creates MyApplication.exe and external manifest MyApplication.exe.manifest that is used by operation system to load dependent assemblies at runtime.

However it may be required to embed manifest inside MyApplication.exe for some reasons. There are several ways to achieve this. A simple change to make is to embed external manifest generated by linker as a resources inside the final binary. This can be achieved by making changes to nmake script file. First

 # Step 1. Adding _VC_MANIFEST_INC to specify which build is incremental (1 - incremental)

 # Step 2. Adding _VC_MANIFEST_BASENAME used to specify name of a temporary resource file

 !if "$(DEBUG)" == "1"

 CPPFLAGS=$(CPPFLAGS) /MDd

 LFLAGS=$(LFLAGS) /INCREMENTAL

 _VC_MANIFEST_INC=1

 _VC_MANIFEST_BASENAME=__VC80.Debug

 !else

 CPPFLAGS=$(CPPFLAGS) /MD

 _VC_MANIFEST_INC=0

 _VC_MANIFEST_BASENAME=__VC80

 !endif

 #Step 3. Specifying name of temporary resource file used only in incremental builds

 !if "$(_VC_MANIFEST_INC)" == "1"

 _VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res

 !else

 _VC_MANIFEST_AUTO_RES=

 !endif

 #Step 4. Adding _VC_MANIFEST_EMBED_EXE - command to embedd manifest to EXE

 !if "$(_VC_MANIFEST_INC)" == "1"

 #MT_SPECIAL_RETURN=1090650113

 #MT_SPECIAL_SWITCH=-notify_resource_update

 MT_SPECIAL_RETURN=0

 MT_SPECIAL_SWITCH=

 _VC_MANIFEST_EMBED_EXE= \

           if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \

           if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \

           rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \

           link $** /out:$@ $(LFLAGS)

 !else

 _VC_MANIFEST_EMBED_EXE= \

           if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;1

 !endif

 # Step 5. Changing command used to build EXE

 MyApplication.exe : MyApplication.obj $(_VC_MANIFEST_AUTO_RES)

           link $** /out:$@ $(LFLAGS)

           $(_VC_MANIFEST_EMBED_EXE)

 MyApplication.obj : MyApplication.cpp

 # Step 6. Adding commands to generate initial empty manifest file, RC file

 #         that references it and for generating the .res file

 $(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc

 $(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest

           type <<$@

 #include <winuser.h>

 1         RT_MANIFEST        "$(_VC_MANIFEST_BASENAME).auto.manifest"

 << KEEP

 $(_VC_MANIFEST_BASENAME).auto.manifest :

           type <<$@

 <?xml version='1.0' encoding='UTF-8' standalone='yes'?>

 <assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>

 </assembly>

 << KEEP

 # Step 7. Adding _VC_MANIFEST_CLEAN - command to clean generate files

 #         for temporary resources

 !if "$(_VC_MANIFEST_INC)" == "1"

 _VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \

     $(_VC_MANIFEST_BASENAME).auto.rc \

     $(_VC_MANIFEST_BASENAME).auto.manifest

 !else

 _VC_MANIFEST_CLEAN=

 !endif

 clean :

           del MyApplication.obj MyApplication.exe MyApplication.exe.manifest

           $(_VC_MANIFEST_CLEAN)

Similarly changes to nmake scripts required in case of an library MyLibrary.dll. If it was built using the following script:

 !if "$(DEBUG)" == "1"

 CPPFLAGS=$(CPPFLAGS) /MDd

 LFLAGS=$(LFLAGS) /DLL /INCREMENTAL

 !else

 CPPFLAGS=$(CPPFLAGS) /MD

 LFLAGS=$(LFLAGS) /DLL

 !endif

 MyLibrary.dll : MyLibrary.obj

           link $** /out:$@ $(LFLAGS)

 MyLibrary.obj : MyLibrary.cpp

 clean :

           del MyLibrary.obj MyLibrary.dll

In this case, build script has to change in a similar way to EXE with only one exception. Manifest has to embedded as resource with ID equal to 2, instead of 1 as for EXE.

 # Step 1. Adding _VC_MANIFEST_INC to specify which build is incremental (1 - incremental)

 # Step 2. Adding _VC_MANIFEST_BASENAME used to specify name of a temporary resource file

 !if "$(DEBUG)" == "1"

 CPPFLAGS=$(CPPFLAGS) /MDd

 LFLAGS=$(LFLAGS) /DLL /INCREMENTAL

 _VC_MANIFEST_INC=1

 _VC_MANIFEST_BASENAME=__VC80.Debug

 !else

 CPPFLAGS=$(CPPFLAGS) /MD

 LFLAGS=$(LFLAGS) /DLL

 _VC_MANIFEST_INC=0

 _VC_MANIFEST_BASENAME=__VC80

 !endif

 #Step 3. Specifying name of temporary resource file used only in incremental builds

 !if "$(_VC_MANIFEST_INC)" == "1"

 _VC_MANIFEST_AUTO_RES=$(_VC_MANIFEST_BASENAME).auto.res

 !else

 _VC_MANIFEST_AUTO_RES=

 !endif

 #Step 4. Adding _VC_MANIFEST_EMBED_DLL - command to embedd manifest into DLL

 !if "$(_VC_MANIFEST_INC)" == "1"

 MT_SPECIAL_RETURN=1090650113

 MT_SPECIAL_SWITCH=-notify_update

 _VC_MANIFEST_EMBED_DLL= \

           if exist $@.manifest mt.exe -manifest $@.manifest -out:$(_VC_MANIFEST_BASENAME).auto.manifest $(MT_SPECIAL_SWITCH) & \

           if "%ERRORLEVEL%" == "$(MT_SPECIAL_RETURN)" \

           rc /r $(_VC_MANIFEST_BASENAME).auto.rc & \

           link $** /out:$@ $(LFLAGS)

 !else

 _VC_MANIFEST_EMBED_DLL= \

           if exist $@.manifest mt.exe -manifest $@.manifest -outputresource:$@;2

 !endif

 # Step 5. Changing command used to build DLL

 MyLibrary.dll : MyLibrary.obj $(_VC_MANIFEST_AUTO_RES)

           link $** /out:$@ $(LFLAGS)

           $(_VC_MANIFEST_EMBED_DLL)

 MyLibrary.obj : MyLibrary.cpp

 # Step 6. Adding commands to generate initial empty manifest file, RC file that references it

 #         and for generating the .res file

 # Note:  RT_MANIFEST has ID 2, because this is DLL.

 $(_VC_MANIFEST_BASENAME).auto.res : $(_VC_MANIFEST_BASENAME).auto.rc

 $(_VC_MANIFEST_BASENAME).auto.rc : $(_VC_MANIFEST_BASENAME).auto.manifest

           type <<$@

 #include <winuser.h>

 2         RT_MANIFEST        "$(_VC_MANIFEST_BASENAME).auto.manifest"

 << KEEP

 $(_VC_MANIFEST_BASENAME).auto.manifest :

           type <<$@

 <?xml version='1.0' encoding='UTF-8' standalone='yes'?>

 <assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'>

 </assembly>

 << KEEP

 #Step 7. Adding _VC_MANIFEST_CLEAN - command to clean generate files for temporary resources

 !if "$(_VC_MANIFEST_INC)" == "1"

 _VC_MANIFEST_CLEAN=-del $(_VC_MANIFEST_BASENAME).auto.res \

     $(_VC_MANIFEST_BASENAME).auto.rc \

     $(_VC_MANIFEST_BASENAME).auto.manifest

 !else

 _VC_MANIFEST_CLEAN=

 !endif

 clean :

           del MyLibrary.obj MyLibrary.dll MyLibrary.dll.manifest

           $(_VC_MANIFEST_CLEAN)

Try your new makefile. This should work for you. If it does not, please let me know ASAP. I will try fixing it for you.

Have fun,
Nikola

Comments

Anonymous
June 19, 2006
PingBack from http://blogates.com/twinsant/2006/06/20/yesterday-readings-158/

Jaa

How to embed manifest inside C/C++ binary using makefiles

Comments

Lisäresursseja