Jaa

Syn attack protection on Windows Vista, Windows 2008, Windows 7, Windows 2008 R2, Windows 8/8.1, Windows 2012 and Windows 2012 R2

  • Artikkeli

[Last updated: 13th January 2014]

 

Hi,

In this blog entry, I wanted to talk about some changes made in Syn attack protection on Windows Vista onwards systems.

Syn attack protection has been in place since Windows 2000 and is enabled by default since Windows 2003/SP1. In the earlier implementation (Windows 2000/Windows 2003), syn attack protection mechanism was configurable via various registry keys (like SynAttackProtect, TcpMaxHalfOpen, TcpMaxHalfOpenRetried, TcpMaxPortsExhausted). With this previous version of syn attack protection, TCPIP stack starts dropping new connection requests when the threshold values are met regardless of how much system memory or CPU power available to the system. As of Windows Vista and onwards (Vista/2008/Win 7/2008 R2/Windows 8/Windows 2012/Windows 2012 R2), syn attack protection algorithm has been changed in the following ways:

1) SynAttack protection is enabled by default and cannot be disabled!

2) SynAttack protection dynamically calculates the thresholds (of when it considers an attack has started) based on the number of CPU cores and memory available and hence it doesn’t expose any configurable parameters via registry, netsh etc.

3) Since TCPIP driver goes into attack state based on the number of CPU cores and the amount of memory available, systems with more resources will start dropping new connection attempts later compared to systems with less resources. That was hard-coded (as per the configured registry settings) on pre-Vista systems where the system was moved to attack state regardless of how much resources were available to the system. The new algorithm eliminates the need of any fine tuning and TCPIP stack will self-tune to best values possible depending on the available resources.

One of the questions asked most about TCP Syn attack protection is how an administrator could identify if a server has moved into attack state. Currently there's no event logged whether or not the system has entered into attack state and started dropping TCP Syn packets on Vista and later systems. The only way of understanding that syn attack protection has kicked in is to collect an ETL trace (and you need start it before the attack starts so that you can see the relevant TCPIP ETL entry).

The command that you need to run is the following from an elevated command prompt (Note: "netsh trace" command only works on Windows 7/Windows 2008 R2 and later systems)

 

netsh trace start capture=yes provider=Microsoft-Windows-TCPIP level=0x05 tracefile=TCPIP.etl

 

Once Syn attack starts, the ETL trace could be stopped with the below command:

 

netsh trace stop

 

Then you can open it up with Network Monitor 3.4. The ETL entry that you should be looking for is the below one:

Hope this helps

Thanks,
Murat

Comments

  • Anonymous
    January 01, 2003
    Hi Webscopia, As I tried to explained in the blog post, there's no configuration for SYN attack protection on Vista onwards systems because the system dynamically does the fine tuning. Thanks, Murat

  • Anonymous
    August 18, 2010
    Is Window Server 2008 configurable or fine-tuneable with respect to Syn Attacks?

  • Anonymous
    August 18, 2010
    Is Window Server 2008 configurable or fine-tuneable with respect to Syn Attacks?

  • Anonymous
    November 09, 2010
    Hi - thanks for your answer. It seems pretty strange that Windows 2008 server would not have something to fine-tune for Syn attacks.

  • Anonymous
    March 28, 2011
    @Webscopia Well that's what MS fanboys deserve.

  • Anonymous
    June 10, 2011
    The comment has been removed

  • Anonymous
    August 08, 2011
    Do we NOT have to set SynAttackProtect to Windows7? If we set the SynAttackProtect , is there some problems?

  • Anonymous
    January 21, 2014
    The comment has been removed

  • Anonymous
    February 24, 2014
    Has anyone figured out to get a log of whether this is causing an issue on servers or not on server 2008 (not R2) system?

  • Anonymous
    July 18, 2014
    What kind of filter you can use in Network Monitor in order to get this particular frame?

  • Anonymous
    October 12, 2014
    And you can still take down every server by just using one command: hping3 -S --flood --rand-source -p someport host-ip

  • Anonymous
    March 08, 2015
    Ugly design. It can suffer many admins.

  • Anonymous
    March 21, 2015
    This post is about DDOS( Distributed Denial of Service) attack , Most of my friends from IT must be aware

  • Anonymous
    May 04, 2015
    Microsoft again has made an feature which makes the system administrators to hate microsoft...

  • Anonymous
    July 30, 2015
    on servers system admins should b able to override and increase values

  • Anonymous
    September 07, 2015
    can this, in any way, be the cause of the following problem?
    http://stackoverflow.com/questions/32423253/syn-ack-is-not-received-for-all-syn-packets-if-sent-from-windows7-2008-2012-8

    Thanks in advance! :)