Jaa

Creating your Own Vista "Chrome" Style Button

  • Artikkeli

In this blog post I’d like to show a way to create your own “chrome” like button template that can be easily modified and used over and over again using Expression Design.  This post is targeted for the absolute beginner, so if you've never tried using Expression Design before, this post should help you become familiar with it. What you should get by the end of this exercise is a button that looks like this:

 

Slice 6 

So let’s begin:

Lets start by creating a rectangle on the art board, setting its width to 150 pixels and its height to 50 pixels:

Slice 1 

While you could use the adorners, you can more precisely use the Action Bar to set the width and height instead:

action

If you look at the final button shown above, you will notice that it has rounded corners. That means we need to make our rectangle have rounded corners also. Select your rectangle and modify its corner radius on the Properties Panel to 10px:

radius

Once you have made your changes, your rectangle will now have curved corners:

Slice 2

Now we’ll add a gradient to our button.  For the sake of simplifying things, we will use the default gradient swatch and make this button a silver (grayscale) button:

gradient

When you apply your gradient, your button will now look as follows:

Slice 8

As you can see, we have quite a bit of work to do before we have it looking nice! First, we’ll remove the stroke from the button by clicking on the stroke tab and setting it to none:

nostroke

Setting the Stroke to none has the effect of removing the black outlines you see in your curved rectangle:

Slice 3

With the stroke gone, let's focus our attention on the fill. Notice that the gradient on the button pans from Left to Right.  We want to change this so it pans from Top to Bottom.  Using the gradient rotation angle tool, change the rotation angle to 270 degrees or -90 degrees as shown below:

rotate

Once you change the rotation angle for your gradient, your button will now look like what is shown in the following image:

Slice 4

Now that we have our smooth gradient, we’re ready to move on to the next step.  The shine! Or what some might call the light layer, or what I like to call it, the Bling!

Copy your button object to the clipboard and use the PASTE IN FRONT feature from the EDIT MENU to place another copy on top. While on top we’ll make some adjustments to give it that look that we want.

Select your new button object and do the following:

  1. Return to the ACTION BAR and change your new objects width and height to (146x25).  Your second button object becomes centered on top of the original. 
     
  2. Also change the corner radius of your new shape to eight (8) pixels to give your new object smaller corner roundness.
     
  3. Nudge your object upwards to the top of your underlying object until it’s about 4 pixels away from the top of your underlying object.  You might want to zoom in a bit to do this more precisely.
     
  4. Change the gradient rotation angle to 90 degrees.  It should have been set to -90 degrees from copying and pasting from your underlying object.
     
  5. Return to the properties panel.  Replace the black gradient stop with the color white so that you have white on both ends of the gradient.

At this point, your button will look a lot different:

Slice 5

While still on the same gradient stop, change the Stop Alpha to 0%:

stop alpha

Boo-yah!  Your button is now complete and should look like this:

Slice 6

Here is the trick.  Click on the bottom object and try replacing the black gradient stop with any color you’d like and watch your button color Scheme change as you browse through the spectrum.  You can even go further and experiment with more than two gradient stops.

Hint:   You can make your button darker by increasing the midpoint of the gradient.

Here is the expression design file with some of the assets used in this tutorial: Download Chrome Style Button Design File

Have fun!
Sam Paye

Comments

  • Anonymous
    February 16, 2008
    In this blog post I’d like to show a way to create your own “chrome” like button template

  • Anonymous
    February 16, 2008
    In this blog post I’d like to show a way to create your own “chrome” like button template

  • Anonymous
    February 16, 2008
    In this blog post I’d like to show a way to create your own “chrome” like button template

  • Anonymous
    February 16, 2008
    You've been kicked (a good thing) - Trackback from DotNetKicks.com

  • Anonymous
    February 16, 2008
    Great tutorial, thanks! However, this is not a Vista button, more like some Mac-gel.

  • Anonymous
    February 17, 2008
    Scott Guthrie has updated links for ASP.NET and AJAX A series of articles detailing LINQ to SQL A set

  • Anonymous
    February 18, 2008
    Chris Cavanagh gave up the source for his WPF Skinning application, Mike Ormond shares his OnFullScreenChange

  • Anonymous
    February 21, 2008
    Axel, Maybe you can show us how a real vista button is done?  I thought I'd leave it open for the user to experiment but if you want to write a new article thats more detailed I'm sure someone out there will find it of good use. SP

  • Anonymous
    April 21, 2008
    I love your tutorial, but I couldn't get both sides of the gradient to be white, without it turning into the fill tool with a solid color.

  • Anonymous
    May 27, 2008
    At home work http. Work at home. At home work www.work-at-home-tonight.com. Work from home jobs.

  • Anonymous
    June 13, 2008
    Not working. everytime I go to adjust the W and H they use their own set guidlines. For example when I type 145 for W , H goes to 48.33 then when I type in the H 25 W goes to 75. What do I do? bob_drawson@msn.com

  • Anonymous
    July 19, 2008
    Hi Bob, it seems like your width and height proportions are constrained. Click on the small chain symbol between the two fieds where you enter the width and height values to remove the lock.

  • Anonymous
    September 02, 2008
    how does this work with expressions blend V2?   using the search field in properties I do not find a "corner radius" attribute.  

  • Anonymous
    September 07, 2008
    guys this tutorial is for version 1, not 2 though it is still possible. for example the corner radius you can drag this time.

  • Anonymous
    October 17, 2008
    How would you make the button resizable. For example, grow wider?

  • Anonymous
    June 15, 2009
    Thank you very much for the tutorial.

  • Anonymous
    March 07, 2010
    nice work man

  • Anonymous
    April 17, 2010
    Look very stylish, Im not realy good in PS and hope Ill can create it as perfect as you.