Jaa

Use batch migration to migrate Exchange 2010 public folders to Exchange 2016 or Exchange 2019

  • Artikkeli

Migrate your public folders from Exchange Server 2010 SP3 RU8 to Exchange Server 2016or Exchange 2019 within the same forest.

We refer to the Exchange 2010 SP3 RU8 or later server as the legacy Exchange server.

You'll perform the migration by using the *MigrationBatch cmdlets, and the *PublicFolderMigrationRequest cmdlets for troubleshooting. In addition, you'll use the following PowerShell scripts:

  • Export-PublicFolderStatistics.ps1: This script creates the folder name-to-folder size mapping file.

  • Export-PublicFolderStatistics.psd1: This support file is used by the Export-PublicFolderStatistics.ps1 script and should be downloaded to the same location.

  • PublicFolderToMailboxMapGenerator.ps1: This script creates the public folder-to-mailbox mapping file.

  • PublicFolderToMailboxMapGenerator.strings.psd1: This support file is used by the PublicFolderToMailboxMapGenerator.ps1 script and should be downloaded to the same location.

  • Create-PublicFolderMailboxesForMigration.ps1: This script creates the target public folder mailboxes for the migration. In addition, this script calculates the number of mailboxes necessary to handle the estimated user load, based on the guidelines for the number of user logons per public folder mailbox recommended in Limits for public folders.

  • Create-PublicFolderMailboxesForMigration.strings.psd1: This support file is used by the Create-PublicFolderMailboxesForMigration.ps1 script and should be downloaded to the same location.

The Step 1: Download the migration scripts section provides details about where to download these scripts. Be sure to download all scripts to the same location.

For additional management tasks related to public folders, see Public folder procedures.

What migration pathways are supported for Exchange Server versions?

Exchange supports moving your public folders from the following legacy versions of Exchange Server:

  • Exchange 2010 SP3 RU8 or later

What do you need to know before you begin?

  • Before you begin, we recommend that you read this topic in its entirety as downtime is required for some steps.

  • The Exchange 2010 server needs to be running Exchange 2010 SP3 RU8 or later.

  • The maximum number of public folders that can be migrated to Exchange 2016 in a single migration is 500,000.

  • In Exchange 2016, you need to be a member of the Organization Management role group. For details about how to enable the Organization Management role group, see Manage role groups.

  • In Exchange 2010, you need to be a member of the Organization Management or Server Management RBAC role groups. For details, see Add Members to a Role Group.

  • Before you migrate, you should consider the Limits for public folders.

  • Before you migrate, move all user mailboxes to Exchange 2016, because users with Exchange 2010 mailboxes will not have access to public folders on Exchange 2016. For details, see Mailbox moves in Exchange Server.

  • After the migration is complete, if you want external senders to send mail to the migrated mail-enabled public folders, the Anonymous user needs to be granted at least the Create Items permission. If you don't do this, external senders will receive a delivery failure notification and the messages won't be delivered to the migrated mail-enabled public folder. To read more about how to set permissions on the Anonymous user, see Mail-enable or mail-disable a public folder.

  • You must use a single migration batch to migrate all of your public folder data. Exchange allows creating only one migration batch at a time. If you attempt to create more than one migration batch simultaneously, the result will be an error.

  • For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts in the Exchange admin center.

Important

Before you begin your migration, make sure you migrate your arbitration mailbox to the target Exchange server. Otherwise, your migration batch will hang in the Starting state. To identify your migration arbitration mailbox, run the following cmdlet:
Get-Mailbox -Arbitration -Identity Migration.*

Step 1: Download the migration scripts

  1. Download all scripts and supporting files from Public Folders Migration Scripts.

  2. Save the scripts to the local computer on which you'll be running PowerShell. For example, C:\PFScripts. Make sure all scripts are saved in the same location.

Step 2: Prepare for the migration

Perform the following prerequisite steps before you begin the migration.

Prerequisite steps on the Exchange 2010 server

  1. For verification purposes at the end of migration, we recommend that you first run the following commands on the Exchange 2010 server to take snapshots of your current public folder deployment:

    • Run the following command to take a snapshot of the original source folder structure:

      Get-PublicFolder -Recurse | Export-CliXML C:\PFMigration\Legacy_PFStructure.xml

    • Run the following command to take a snapshot of public folder statistics such as item count, size, and owner:

      Get-PublicFolderStatistics | Export-CliXML C:\PFMigration\Legacy_PFStatistics.xml

    • Run the following command to take a snapshot of the permissions:

      Get-PublicFolder -Recurse | Get-PublicFolderClientPermission | Select-Object Identity,User -ExpandProperty AccessRights | Export-CliXML C:\PFMigration\Legacy_PFPerms.xml

  2. If the name of a public folder contains a backslash ( \ ), migration will create the migrated public folders in the parent public folder. Before you migrate, we recommend that you rename any public folders that have a backslash in the name.

    To locate public folders in Exchange 2010 that have a backslash in the name, run the following command:

    Get-PublicFolderStatistics -ResultSize Unlimited | Where {($_.Name -like "*\*") -or ($_.Name -like "*/*") } | Format-List Name, Identity

    If any public folders are returned, you can rename them by running the following command:

    Set-PublicFolder -Identity <public folder identity> -Name <new public folder name>

  3. Make sure there isn't a record of a previously successful migration by running the following command:

    Get-OrganizationConfig | Format-List PublicFoldersLockedforMigration, PublicFolderMigrationComplete

    A previously successful migration will set the PublicFoldersLockedforMigration or PublicFolderMigrationComplete properties to the value True, which will cause your new migration request to fail.

    If the property values are True, run the following command to change them to False:

    Set-OrganizationConfig -PublicFoldersLockedforMigration $false -PublicFolderMigrationComplete $false

    Note

    After resetting these properties, you need to wait for Exchange to detect the new settings. This may take up to two hours to complete.

For detailed syntax and parameter information, see the following topics:

Prerequisite steps on the Exchange 2016 server

  1. Make sure there are no existing public folder migration requests. If there are, clear them or your own migration request will fail. This step isn't required in all cases; it's only required if you think there may be an existing migration request in the pipeline.

    Important

    Before removing a migration request, it is important to understand why there was an existing one. Running the following commands will determine when a previous request was made and help you diagnose any problems that may have occurred. You may need to communicate with other administrators in your organization to determine why the change was made.

    • Run the following command to discover any existing batch migration requests:

      $batch = Get-MigrationBatch | ?{$_.MigrationType.ToString() -eq "PublicFolder"}

    • Run the following command to remove any existing public folder batch migration requests.

      $batch | Remove-MigrationBatch -Confirm:$false

  2. Make sure no public folders or public folder mailboxes exist on the Exchange 2016 servers by running the following command:

    Get-Mailbox -PublicFolder

    If the command didn't return any public folder mailboxes, continue to Step 3: Generate the .csv files. If the command returned any public folders, run the following command to see if any public folders exist:

    Get-PublicFolder

    If you have any public folders, run the following commands to remove them. Make sure you've saved any information that was in the public folders.

    Note

    All information contained in the public folders will be permanently deleted when you remove them.

    Get-Mailbox -PublicFolder | Where {$_.IsRootPublicFolderMailbox -eq $false} | Remove-Mailbox -PublicFolder -Force -Confirm:$false

    Get-Mailbox -PublicFolder | Remove-Mailbox -PublicFolder -Force -Confirm:$false

For detailed syntax and parameter information, see the following topics:

Step 3: Generate the .csv files

  1. On the Exchange 2010 server, run the Export-PublicFolderStatistics.ps1 script to create the folder name-to-folder size mapping file. This script needs to be run by a local administrator. The file will contain two columns: FolderName and FolderSize. The values for the FolderSize column will be displayed in bytes. For example, \PublicFolder01,10000.

    .\Export-PublicFolderStatistics.ps1 <Folder to size map path> <FQDN of source server>

    • FQDN of source server equals the fully qualified domain name of the Mailbox server where the public folder hierarchy is hosted.

    • Folder to size map path equals the file name and path on a local or network shared folder where you want the .csv file saved. Later in this topic, you'll need to access this file from the Exchange 2016 server. If you specify only the file name, the file will be generated in the current PowerShell directory on the local computer.

    Example 1

    The following example exports the public folder statistics to a file named PFStats.csv in the same folder from which the script is executed:

    .\Export-PublicFolderStatistics.ps1 -ExportFile PFStats.csv -PublicFolderServer bat2exch1

    Example 2

    The following example exports the public folder statistics to a file named PFStats.csv in the network shared folder named Data on server Exch2:

    .\Export-PublicFolderStatistics.ps1 -ExportFile \\Exch2\data\PFStats.csv -PublicFolderServer exch1

  2. Run the PublicFolderToMailboxMapGenerator.ps1 script to create the public folder-to-mailbox mapping file. This file is used to calculate the correct number of public folder mailboxes on the Exchange 2016 server.

    Note

    If the name of a public folder contains a backslash ****, the public folders will be created in the parent public folder. We recommend that you review the .csv file and edit any names that contain a backslash.

    .\PublicFolderToMailboxMapGenerator.ps1 <Maximum mailbox size in bytes> <Folder to size map path> <Folder to mailbox map path>

    • Maximum mailbox size in bytes equals the maximum size you want to set for the new public folder mailboxes. When specifying this setting, be sure to allow for expansion so the public folder mailbox has room to grow.

    • Folder to size map path equals the full file path of the .csv file you created when running the Export-PublicFolderStatistics.ps1 script.

    • Folder to mailbox map path equals the file name and path of the folder-to-mailbox .csv file that you'll create with this step. If you specify only the file name, the file will be generated in the current PowerShell directory on the local computer.

Step 4: Create the public folder mailboxes in Exchange 2016

Run the following command to create the target public folder mailboxes. The script will create a target mailbox for each mailbox in the .csv file that you generated previously in Step 3 by running the PublicFoldertoMailboxMapGenerator.ps1 script.

.\Create-PublicFolderMailboxesForMigration.ps1 -FolderMappingCsv Mapping.csv -EstimatedNumberOfConcurrentUsers:<estimate>

Mapping.csv is the file generated by the PublicFoldertoMailboxMapGenerator.ps1 script in Step 3. The estimated number of simultaneous user connections browsing a public folder hierarchy is usually less than the total number of users in an organization.

Step 5: Start the migration request

After you create the batch migration request in the Exchange Management Shell, you can view the requests and manage them in the Exchange admin center (EAC).

  1. On the Exchange 2016 server, run the following command:

    New-MigrationBatch -Name PFMigration -SourcePublicFolderDatabase (Get-PublicFolderDatabase -Server <Source server name>) -CSVData ([System.IO.File]::ReadAllBytes('<Folder to mailbox map path>')) -NotificationEmails <email addresses for migration notifications>

    The NotificationEmails parameter is optional.

  2. Start the migration in the EAC or in the Exchange Management Shell.

    • In the Exchange Management Shell, run the following command:

      Start-MigrationBatch PFMigration

    • In the EAC:

      1. Log into Exchange Online and open the EAC.

      2. Go to Recipients > Migration.

      3. Select the migration batch you just created, and then click the start button.

      In the EAC, the Status column will show the initial batch status as Created. The status changes to Syncing during migration. When the migration request is complete, the status will be Synced. You can double-click a batch to view the status of individual mailboxes within the batch. Mailbox jobs begin with a status of Queued. When the job begins the status is Syncing, and once InitialSync is complete, the status will show Synced.

You can view and manage the progress and completion of the migration in the Recipients > Migration tab in the EAC.

Because the New-MigrationBatch cmdlet initiates a mailbox migration request for each public folder mailbox, you can view the status of these requests using the mailbox migration page in the EAC, and you can create migration reports that can be emailed to you.

  1. Log into Exchange Online and open the EAC.

  2. Go to Recipients > Migration.

  3. Select the migration request that you just created and then click View Details in the Details pane.

For detailed syntax and parameter information, see the following topics:

Step 6: Lock down the public folders on the Exchange 2010 server for final migration (downtime required)

Until this point in the migration, users have been able to access public folders. The next steps will log users off from the Exchange 2010 public folders and lock the folders while the migration completes its final synchronization. Users won't be able to access public folders during this process. Also, any mail sent to mail-enabled public folders will be queued and won't be delivered until the public folder migration is complete.

Before you run the PublicFoldersLockedForMigration command as described below, make sure that all jobs are in the Synced state. You can do this by running the Get-PublicFolderMailboxMigrationRequest command. Continue with this step only after you've verified that all jobs are in the Synced state.

On the Exchange 2010 server, run the following command to lock the public folders for finalization.

Set-OrganizationConfig -PublicFoldersLockedForMigration:$true

For detailed syntax and parameter information, see Set-OrganizationConfig.

If your organization has multiple public folder databases, you'll need to wait until public folder replication is complete to confirm that all public folder databases have picked up the PublicFoldersLockedForMigration property value and any pending changes users recently made to folders have converged across the organization. This may take several hours.

Step 7: Finalize the public folder migration (downtime required)

First, run the following cmdlet to change the Exchange 2016 deployment type to Remote:

Set-OrganizationConfig -PublicFoldersEnabled Remote

Once that is done, you can complete the public folder migration by running the following command:

Complete-MigrationBatch PFMigration

Or, in EAC, you can complete the migration by clicking Complete this migration batch.

When you complete the migration, Exchange will perform a final synchronization between the Exchange 2010 server and Exchange 2016. If the final synchronization is successful, the public folders on the Exchange 2016 server will be unlocked and the status of the migration batch will change to Completing, and then Completed. It is common for the migration batch to take a few hours before its status changes from Synced to Completing, at which point the final synchronization will begin.

Note

If for any reason the migration batch file does not finalize (the PublicFolderMigrationComplete property value is False) restart the Information Store (IS) on the Exchange 2010 server.

Step 8: Test and unlock the public folder migration

After you finalize the public folder migration, you should run the following test to make sure that the migration was successful. This allows you to test the migrated public folder hierarchy before you switch to using Exchange 2016 public folders.

  1. In PowerShell, run the following command to assign some test mailboxes to use any newly migrated public folder mailbox as the default public folder mailbox.

    Set-Mailbox -Identity <Test User> -DefaultPublicFolderMailbox <Public Folder Mailbox Identity>

  2. Log on to Outlook 2007 or later with the test user identified in the previous step, and then perform the following public folder tests:

    • View the hierarchy.

    • Check permissions.

    • Create and delete public folders.

    • Post content to and delete content from a public folder.

  3. If you run into any issues, see Roll back the migration later in this topic. If the public folder content and hierarchy is acceptable and functions as expected, run the following command to unlock the public folders for all other users.

    Get-Mailbox -PublicFolder | Set-Mailbox -PublicFolder -IsExcludedFromServingHierarchy $false

    Important

    Don't use the IsExcludedFromServingHierarchy parameter after initial migration validation is complete as this parameter is used by the automated load-balancing service for Exchange.

  4. On the Exchange 2010 server, run the following command to indicate that the public folder migration is complete:

    Set-OrganizationConfig -PublicFolderMigrationComplete:$true

  5. After you've verified that the migration is complete, on the Exchange 2016 server, run the following command:

    Set-OrganizationConfig -PublicFoldersEnabled Local

  6. Finally, if you want external senders to send mail to the migrated mail-enabled public folders, the Anonymous user needs to be granted at least the Create Items permission. If you don't do this, external senders will receive a delivery failure notification and the messages won't be delivered to the migrated mail-enabled public folder.

    You can use the Exchange Management Shell or Outlook to set the permissions on the Anonymous user. To read more about how to set permissions on the Anonymous user, see Mail-enable or mail-disable a public folder.

How do I know this worked?

In Step 2: Prepare for the migration, you were instructed to take snapshots of the public folder structure, statistics, and permissions before the migration began. The following steps will help verify that your public folder migration was successful by taking the same snapshots after the migration is complete. You can then compare the data in both files to verify success.

  1. Run the following command to take a snapshot of the new folder structure.

    Get-PublicFolder -Recurse | Export-CliXML C:\PFMigration\Cloud_PFStructure.xml

  2. Run the following command to take a snapshot of the public folder statistics such as item count, size, and owner.

    Get-PublicFolderStatistics -ResultSize Unlimited | Export-CliXML C:\PFMigration\Cloud_PFStatistics.xml

  3. Run the following command to take a snapshot of the permissions.

    Get-PublicFolder -Recurse | Get-PublicFolderClientPermission | Select-Object Identity,User -ExpandProperty AccessRights | Export-CliXML  C:\PFMigration\Cloud_PFPerms.xml

Remove public folder databases from the Exchange 2010 servers

After the migration is complete, and you have verified that your Exchange 2016 or Exchange 2019 public folders are working as expected, you should remove the public folder databases on the Exchange 2010 servers.

For details about how to remove public folder databases from Exchange 2010 servers, see Remove Public Folder Databases.

Roll back the migration

If you run into issues with the migration and need to reactivate your Exchange 2010 public folders, perform the following steps.

Caution

If you roll your migration back to the Exchange 2010 servers, you will lose any email that was sent to mail-enabled public folders or content that was posted to public folders in Exchange 2016 or Exchange 2019 after the migration. To save this content, you need to export the public folder content to a .pst file and then import it to the Exchange 2010 public folders when the rollback is complete.

  1. On the Exchange 2010 server, run the following command to unlock the migrated public folders. This process may take several hours.

    Set-OrganizationConfig -PublicFoldersLockedForMigration $false

  2. On the Exchange 2016 server, run the following commands to remove the public folder mailboxes.

    Get-Mailbox -PublicFolder | Where {$_.IsRootPublicFolderMailbox -eq $false} | Remove-Mailbox -PublicFolder -Force -Permanent $true -Confirm:$false

    Get-Mailbox -PublicFolder | Remove-Mailbox -PublicFolder -Force -Permanent $true -Confirm:$false

  3. On the Exchange 2010 server, run the following command to set the PublicFolderMigrationComplete property value to False.

    Set-OrganizationConfig -PublicFolderMigrationComplete $false

  4. On the Exchange 2016 server, run the following command to remove the public folder mailboxes.

    Set-OrganizationConfig -PublicFoldersEnabled Remote -RemotePublicFolderMailboxes <ProxyMailbox1>,<ProxyMailbox2>,...,<ProxyMailboxN>

    For more information about the remote Public Folder mailboxes you must use with this command, see Configure legacy public folders where user mailboxes are on Exchange 2013 servers.