estructura FLT_CREATEFILE_TARGET_ECP_CONTEXT (fltkernel.h)
La estructura de FLT_CREATEFILE_TARGET_ECP_CONTEXT es un parámetro de creación adicional (ECP) que se usa para devolver información de destino de reanálisis al autor de la llamada de FltCreateFileEx2.
Sintaxis
typedef struct _FLT_CREATEFILE_TARGET_ECP_CONTEXT {
PFLT_INSTANCE Instance;
PFLT_VOLUME Volume;
PFLT_FILE_NAME_INFORMATION FileNameInformation;
FLT_CREATEFILE_TARGET_FLAGS Flags;
} FLT_CREATEFILE_TARGET_ECP_CONTEXT, *PFLT_CREATEFILE_TARGET_ECP_CONTEXT;
Miembros
Instance
Instancia de filtro asociada al destino ajustado.
Volume
Volumen de destino ajustado.
FileNameInformation
Información del archivo para el destino ajustado.
Flags
Marcas que controlan la operación de reanálisis. Este valor puede ser 0 o lo siguiente.
| Valor | Significado |
|---|---|
|
Solicite que FltCreateFileEx2 intente una operación de reanálisis cuando no se encuentre un destino con la información del archivo original. |
Comentarios
Cuando un autor de llamada de FltCreateFileEx2 desea habilitar el reparsing para un destino de volumen, se puede incluir un FLT_CREATEFILE_TARGET_ECP_CONTEXT como ECP en la lista ECP en el parámetro DriverContext . Si este ECP está presente, FltCreateFileEx2 ajustará el dispositivo de destino para la operación de creación e intentará encontrar una instancia filtrada de un volumen adecuado para la información de archivo especificada. Si el administrador de filtros no encuentra una instancia correspondiente para el autor de la llamada en el volumen de destino, establecerá los miembros Volume y FileNameInformation de FLT_CREATEFILE_TARGET_ECP_CONTEXT para el nuevo destino. Después, el autor de la llamada puede usar esta información para decidir cuál es la mejor manera de continuar.
Si el autor de la llamada de FltCreateFileEx2 pretende controlar la propia operación de reanálisis, la marca FLTTCFL_AUTO_REPARSE se borra del miembro Flags . En este caso, FltCreateFileEx2 colocará la información de ajuste de destino inicial en el ECP y, a continuación, devolverá, finalizando el intento de creación del archivo.
Si los valores de Instance, Volume o FileNameInformation se establecen en un ECP reconocido, se les hace referencia a objetos. Un autor de llamada de FltCreateFileEx2 es responsable de llamar a FltObjectDereference para Instance y Volume, y FltReleaseFileNameInformation para FileNameInformation.
En la rutina de ejemplo siguiente se muestra cómo un minifiltro puede llamar a FltCreateFileEx2 con FLT_CREATEFILE_TARGET_ECP_CONTEXT para controlar un reanálisis a un volumen diferente cuando sea necesario para buscar un destino de archivo.
NTSTATUS
CrossVolumeCreate(
_In_ PUNICODE_STRING FileName,
_In_ PFLT_FILTER Filter,
_In_ PFLT_INSTANCE Instance,
_Inout_ PIO_STATUS_BLOCK IoStatus,
_Out_ PHANDLE Handle,
_Outptr_ PFILE_OBJECT *FileObject
)
/*++
Routine Description:
Issues a targeted create and handles cross volume reparse.
Arguments:
FileName - The name of the file to open
Filter – The filter issuing the create
Instance - The filter instance for the targeted create
IoStatus - Receives the operation status
Handle - Receives the file handle
FileObject - Receives the file object
Return Value:
status of the operation
--*/
{
PFLT_CREATEFILE_TARGET_ECP_CONTEXT ecpContext;
PECP_LIST ecpList;
PFLT_FILE_NAME_INFORMATION fileNameInformation;
IO_DRIVER_CREATE_CONTEXT myCreateContext;
OBJECT_ATTRIBUTES objAttr;
NTSTATUS status;
ecpContext = NULL;
ecpList = NULL;
fileNameInformation = NULL;
status = STATUS_SUCCESS;
InitializeObjectAttributes( &objAttr,
FileName,
OBJ_KERNEL_HANDLE,
NULL,
NULL );
//
// First we optimistically send a targeted create that is not
// setup to handle cross-volume reparse.
//
status = FltCreateFileEx2( Filter,
Instance,
Handle,
FileObject,
FILE_READ_DATA|FILE_WRITE_DATA,
&objAttr,
IoStatus,
NULL,
0,
FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE,
FILE_OPEN_IF,
FILE_NON_DIRECTORY_FILE | FILE_SYNCHRONOUS_IO_NONALERT,
NULL,
0,
IO_IGNORE_SHARE_ACCESS_CHECK,
NULL );
if (!NT_SUCCESS(status)) {
if ((status != STATUS_INVALID_DEVICE_OBJECT_PARAMETER) &&
(status != STATUS_MOUNT_POINT_NOT_RESOLVED)) {
goto CrossVolumeCreateExit;
}
} else {
//
// The create succeeded. There must not have been a cross-volume
// reparse.
//
goto CrossVolumeCreateExit;
}
//
// The create failed traversing a cross-volume link.
// Issue another create with a targeting ECP so that
// we can handle cross-volume reparse.
//
status = FltAllocateExtraCreateParameterList( Filter,
0,
&ecpList );
if (!NT_SUCCESS( status )) {
goto CrossVolumeCreateExit;
}
status = FltAllocateExtraCreateParameter( Filter,
&GUID_ECP_FLT_CREATEFILE_TARGET,
sizeof(FLT_CREATEFILE_TARGET_ECP_CONTEXT),
0,
NULL,
POOL_TAG,
&ecpContext );
if (!NT_SUCCESS( status )) {
goto CrossVolumeCreateExit;
}
//
// Initialize the ECP with the FLTTCFL_AUTO_REPARSE flag which
// tells filter manager to handle the cross-volume reparse
// internally when possible (when it can find our instance
// on the target volume). If this flag is not set, the filter will
// be responsible for calling FltCreateFileEx2 with appropriate
// Instance parameter.
//
ecpContext->Flags = FLTTCFL_AUTO_REPARSE;
ecpContext->Instance = NULL;
ecpContext->Volume = NULL;
ecpContext->FileNameInformation = NULL;
status = FltInsertExtraCreateParameter( Filter,
ecpList,
ecpContext );
if (!NT_SUCCESS( status )) {
goto CrossVolumeCreateExit;
}
IoInitializeDriverCreateContext( &myCreateContext );
myCreateContext.ExtraCreateParameter = ecpList;
InitializeObjectAttributes( &objAttr,
FileName,
OBJ_KERNEL_HANDLE,
NULL,
NULL );
status = FltCreateFileEx2( Filter,
Instance,
Handle,
FileObject,
FILE_READ_DATA|FILE_WRITE_DATA,
&objAttr,
IoStatus,
NULL,
0,
FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE,
FILE_OPEN_IF,
FILE_NON_DIRECTORY_FILE | FILE_SYNCHRONOUS_IO_NONALERT,
NULL,
0,
IO_IGNORE_SHARE_ACCESS_CHECK,
&myCreateContext );
if (!NT_SUCCESS(status)) {
if ((status != STATUS_INVALID_DEVICE_OBJECT_PARAMETER) &&
(status != STATUS_MOUNT_POINT_NOT_RESOLVED)) {
goto CrossVolumeCreateExit;
}
} else {
goto CrossVolumeCreateExit;
}
//
// Filter manager should have acknowledged the ECP. If it
// is not acknowledged, it does not contain any cross-volume
// targeting information.
//
if (!FltIsEcpAcknowledged( Filter, ecpContext)) {
goto CrossVolumeCreateExit;
}
//
// Filter manager could not automatically handle the
// cross-volume traversal. We choose to send the create
// to the top of the stack on the target volume indicated
// in the targeting ECP.
//
//
// The ECP may contain pointers to referenced objects. We
// need to deal with those references before reusing the
// ECP.
//
if (ecpContext->Volume != NULL) {
FltObjectDereference( ecpContext->Volume );
ecpContext->Volume = NULL;
}
//
// Note: since we flagged the ECP to automatically handle
// cross-volume reparse, the create should have failed after
// we traversed a mountpoint only if our filter did not have
// an instance on the target volume. In that case we would
// expect the Instance field in the ECP to be NULL. We still
// demonstrate derefing the instance for the general case.
//
if (ecpContext->Instance != NULL) {
FltObjectDereference( ecpContext->Instance );
ecpContext->Instance = NULL;
}
fileNameInformation = ecpContext->FileNameInformation;
ecpContext->FileNameInformation = NULL;
//
// Tell filter manager to not handle the cross-volume
// reparse itself. Presumably a filter would do this if it
// did not want the create automatically targeted at its
// instance on another volume.
//
ecpContext->Flags = 0;
//
// Reinitialize the targeting ECP to it can be reused.
//
FltPrepareToReuseEcp( Filter, ecpContext );
IoInitializeDriverCreateContext( &myCreateContext );
myCreateContext.ExtraCreateParameter = ecpList;
InitializeObjectAttributes( &objAttr,
&fileNameInformation->Name,
OBJ_KERNEL_HANDLE,
NULL,
NULL );
status = FltCreateFileEx2( Filter,
NULL,
Handle,
FileObject,
FILE_READ_DATA|FILE_WRITE_DATA,
&objAttr,
IoStatus,
NULL,
0,
FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE,
FILE_OPEN_IF,
FILE_NON_DIRECTORY_FILE | FILE_SYNCHRONOUS_IO_NONALERT,
NULL,
0,
IO_IGNORE_SHARE_ACCESS_CHECK,
&myCreateContext );
if (!NT_SUCCESS(status)) {
if ((status != STATUS_INVALID_DEVICE_OBJECT_PARAMETER) &&
(status != STATUS_MOUNT_POINT_NOT_RESOLVED)) {
goto CrossVolumeCreateExit;
}
//
// We hit another cross-volume link. For the purposes of
// this example we are just giving up. An actual filter
// would determine the next target instance based on the
// information provided in the targeting ECP. Some of the
// possibilities are:
// 1) If the Instance field in the ECP is available, target
// the create to this instance.
// 2) If the Instance field is NULL, attempt to attach
// an instance based on the Volume parameter in the ECP
// and then target that new instance.
// 3) Use the FileNameInformation provided in the ECP and a
// NULL instance to target the top of the other
// volume's stack.
//
} else {
goto CrossVolumeCreateExit;
}
CrossVolumeCreateExit:
if (ecpContext != NULL &&
FltIsEcpAcknowledged( Filter, ecpContext)) {
FltRemoveExtraCreateParameter( Filter,
ecpList,
&GUID_ECP_FLT_CREATEFILE_TARGET,
&ecpContext,
NULL );
if (ecpContext->Instance != NULL) {
FltObjectDereference( ecpContext->Instance );
}
if (ecpContext->Volume != NULL) {
FltObjectDereference( ecpContext->Volume );
}
if (ecpContext->FileNameInformation != NULL) {
FltReleaseFileNameInformation( ecpContext->FileNameInformation );
}
FltFreeExtraCreateParameter( Filter, ecpContext );
}
if (ecpList != NULL) {
FltFreeExtraCreateParameterList( Filter, ecpList );
}
if (fileNameInformation != NULL) {
FltReleaseFileNameInformation( fileNameInformation );
}
return status;
}
Requisitos
| Requisito | Value |
|---|---|
| Cliente mínimo compatible | Esta estructura está disponible a partir de Windows 8. |
| Encabezado | fltkernel.h (incluya FltKernel.h) |