Checklist: Installing and configuring the router
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2
Checklist: Installing and configuring the router
| Step | Reference |
|---|---|
Review key concepts. |
|
Verify the compatibility of all hardware to be installed in the server running Routing and Remote Access. |
|
Install the hardware. |
Manufacturer's documentation |
For a new network, decide which protocols and routing features of Routing and Remote Access you want to use. For an existing network, determine which protocols and routing features of Routing and Remote Access you need to enable. |
Routing Overview and documentation about your network |
Install and configure the protocols. |
|
Enable and configure the Routing and Remote Access service. |
|
(Optional) Design and deploy static IP routing. |
|
(Optional) Design and deploy the RIP-for-IP routing protocol. |
|
(Optional) Design and deploy the OSPF routing protocol. This feature is not available on the Itanium-based versions of the Windows operating systems. |
|
(Optional) Add and configure the DHCP Relay Agent. |
|
(Optional) Configure IP multicast support. |
|
(Optional) Design and deploy network address translation. |
|
(Optional) Configure the appropriate IP packet filters. |
|
(Optional) Design and deploy demand-dial routing. |